Safety Consultant

• Overall monitoring manager of the site.  
• Direct and coordinate activities of assigned Field Observers.  
• Work collaboratively with the Owner’s Project Manager to oversee and coordinate the Owner’s other contractors’ scopes of work.  
• Attend the pre-construction meeting with all involved construction entities as required.   
• Attend the weekly progress meetings to be held by the EPC Contractor as well as the Owner’s internal stakeholders.  
• Attend the monthly progress meetings to be held by the EPC Contractor as well as the Owner’s internal stakeholders.  
• Through direct field observations, and by evaluating Field Observers’ reports, ensure that the construction work complies with all applicable plans, specifications, building codes and other legal or regulatory requirements.  
• Ensure that the Field Observers observe and report on the required safety check points.  
• Collect, verify, and report on the completeness of the required safety process documentation from each of the contractors on site, and review any unsatisfactory results and provide reporting for the entire project through designated channels.  
• Manage the relationships with the Owner’s client and stakeholders.  
• Act as facilitator for the resolution of site level conflicts, such as construction problems, scheduling delays, logistical conflicts, and construction methods.  
• Work directly with the Owner’s project director, project managers, EPC contractor, other contractors, BESS supplier, engineers, vendors, and others as required.  
• Provide specialized support to the Owner as requested. Such support may include procurement of additional staffing, specialized equipment, or outside contract services in accordance with Owner’s processes and procedures.  
• Review daily logs, construction reports, and inspections.  
• Coordinate final inspections, testing, commissioning, and walk-downs and establish final punch list.  
• Proactively identify areas of potential risk and identify design or construction elements that are likely to result in disputes or claims.  
• Maintain the job books and review for accuracy and completeness. 
• Monitor the proper storage and security of materials and equipment.

• 5+ years of electrical construction experience, preferably with battery storage
• Knowledge of/familiarity with electrical construction standards and safety procedures
• Familiarity with ProjectWise and Microsoft Office is preferred.
• Strong written and verbal communication skills

One Tech Engineering is searching for Construction Supervisor for a position located in Becker, Minnesota. The Construction Supervisor will be responsible for construction and commissioning of high voltage substations associated with the solar project.

The candidate must be a US citizen or hold a green card. The candidate must have 5 to 7 years of previous high voltage electrical experience/background.

• Involved in the communication and planning for the installation and commissioning of the entire substation.
• Take part of coordination meetings with transmission installation and with substation construction.
  Conduct research, planning, and review of execution plans, and commissioning plans.
• Be on-site to verify that contractors are executing installations according to the project plans.
• Working with the executive or upper-level management of the site in addition to the contractor site construction team.
• Manages the entire project lifecycle from project definition through implementation.
• Accountable for meeting agreed-upon scope, cost, schedule, and quality measures.
• Develops project plan and drives project milestones.
• Establishes effective communication plan with the project team and key stakeholders.
• Provides day-to-day direction to project resources and ensures the project teams are provided the resources and support that enable the teams to reach their defined objectives.
• Ensures effective change management occurs throughout the project.
• Responsible for the preparation of documentation and status reports.

• 5-7 years of previous high voltage electrical experience/background.
• Knowledge of high voltage electricity, substations, transmission lines and their associated components.
• Experience with installation and the commissioning of high voltage sub yards.
  Experience with Adobe Pro, Procore/PM Web software for communication.
• Proficient with SharePoint and MS Office suite.
• Strong communication skills

• Perform field inspections using ArcGIS, safety oversight, and participation in incident investigations and safety culture improvements.
• Serve as the owner’s representative for civil inspections, verifying contractor work against project specifications.
• Coordinate daily with the civil team to understand upcoming inspections and field activities.
• Meet with site representatives to discuss internal inspections, POD updates, and safety concerns.
• Conduct thorough field inspections and safety walkdowns using ArcGIS software for documentation and reporting.
• Monitor contractor compliance with contract requirements and project standards.
• Identify, report, and assist in resolving quality issues or deviations in the field.
• Respond promptly to safety incidents and assist in investigations and root cause analysis.
• Promote and support a strong safety culture across the job site.
• Monitor and address weather-related risks that could affect safety or project timelines.
• Maintain accurate documentation of field activities, inspections, and observations using digital tools.
• Communicate findings, progress, and concerns clearly to both field teams and project management.
• Collaborate with multiple stakeholders to ensure alignment on construction progress, safety, and quality objectives.

• 7+ years experience in construction management, preferably in renewables.
• Degree in Safety, Construction Management, or a related field preferred.
• Prior experience in civil inspection and on-site safety oversight.
• Proficient in ArcGIS, Procore, and Microsoft Office Suite.
• OSHA certifications (e.g., OSHA 30) or equivalent training.
• Bilingual in Spanish and English is a plus.
• Must have a valid drivers license.

• Oversee contractors performing civil tasks such as constructing access roads, crane pads, and turnarounds.
• Ensure compliance with road use agreements and other civil-related regulations.
• Work with internal resources from citing and land rights to ensure all activities are properly authorized and documented.
• Collaborate with environmental teams to ensure that the project does not cause undue harm to infrastructure, fields, or neighboring properties.
• Ensure that all interactions with neighbors and stakeholders are conducted with respect and dignity, maintaining positive community relations.
• Ensure that the civil work does not cause undue harm to existing infrastructure or the environment.

• 3-7 years of experience in the civil aspects of renewable projects, particularly wind projects. This includes tasks such as temporary road construction, road removal, ground decompaction, and restoration.
• Familiarity with road use agreements and compliance with civil-related regulations.
• Experience with crane setups and takedowns, ensuring that the civil works support the stability and safety of the cranes.
• Ability to oversee contractors, manage daily planning and meetings, and conduct site inspections to ensure quality and compliance.
• Proficiency in project management tools, spreadsheets, and logistics software
• A valid Driver’s License is required.
• Strong verbal and written communication skills.

One Tech Engineering is searching for a Project Controls Specialist for a position located in Houston, Texas. The Project Controls Specialist will be responsible for leading the project controls processes with the internal project management team to execute project deliverables within budget and schedule.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in engineering, construction management or related field and 3 years of direct project controls experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Ensure project set-up in the Enterprise Planning & Controls software.
• Analyze data, review logs, and run reports in the Enterprise Planning & Controls software or other tools.
• Create Work Breakdown Structure (WBS).
• Develop, implement, and maintain effective scheduling reports, cost reports, cash flows and forecasts for multiple projects.
• Follow project execution plans.
• Responsible for engineering, procurement and construction planning, scheduling, logistics and cost control.
• Serves as a point of contact for technical questions from the project team.
• Approve Purchase Orders and/or Subcontracts for proper coding.
• Input and document changes to cost reports or forecasts.
• Interfaces with the Project Management Team and Accounting Department to review project costs and contingency costs and support external audits.
• Review upstream (prime contract) and downstream (purchase order & subcontract) change orders.
• Develop and present a cash flow report.
• Develop various levels of schedules.
• Apply and review the entry of logic ties within the schedules.
• Monitor resource loading of a schedule.
• Support Interactive Project Planning Meetings (IPPM).
• Create various schedule reports and determine appropriate reporting format.
• Develop, review, and analyze pre-programmed project scheduling reports and back-up documentation for accuracy.
• Consults with the project team on schedule progress.
• Analyzes and evaluates schedule management involving the critical path method of scheduling techniques, estimating, project cost management and forecasting.
• Perform schedule what-if scenarios.
• Develop and maintain an earned value management system.
• Input and validate progress measurement.
• Develop and maintain progress curves.
• Perform material takeoffs.
• Perform quality checks and inspections on project controls deliverables.
• Perform field audits to validate accuracy of reporting and processes.
• Capable of assisting with Project Forensic Analysis.
• Performs other duties as assigned.
• Complies with all policies and standards.
  
  

• Bachelor’s Degree in engineering, construction management or related field and 3 years of direct project controls experience.
• Experience with Oracle Primavera P6 preferred.
• Excellent written and verbal communication skills.
• Excellent interpersonal skills.
• Proficient with Microsoft Office.
• OSHA 10-hour safety certification or the ability to obtain.

One Tech Engineering is searching for a Benefits Specialist for a position located in Minneapolis, Minnesota. The Benefits Specialist provides back-end administrative support related to leave and accommodation requests.

The candidate must be a US citizen or hold a green card. The candidate should have a few years of relevant HR, benefits, or administrative experience

• Manage and maintain timekeeping systems.
• Administer employee leave by updating statuses and processing transitions in and out of leave.
• Complete and submit required state leave and compliance paperwork.
• Support payroll processing, including lookbacks and payroll close activities.
• Process and track documentation during payroll cycles.
• Compile and analyze employee pay history (including up to five-year lookbacks).
• Manage and respond to shared email inbox inquiries.
• Communicate policies and leave updates to employees via email.
• Maintain accurate data entry and system updates in Workday and UKG.
• Ensure compliance with internal policies and state regulations related to leave management.
  
  

• A few years of relevant HR, benefits, or administrative experience.
• Prior experience with leaves, accommodations, or benefits preferred.
• Strong data entry accuracy and attention to detail.
• Experience with or ability to learn Workday, UKG, and ServiceNow.
• Foundational knowledge of HR or benefits, especially leave administration.
• Ability to navigate multiple systems and manage competing tasks.
• Exposure to statutory leave programs is a plus.
• Familiarity with payroll processes is a plus, but not required.

One Tech Engineering is searching for a Sourcing Specialist for a position located in Minneapolis, Minnesota. The Sourcing Specialist will support large capital and onsite services projects for the nuclear fleet, managing end‑to‑end strategic sourcing activities including intake review, contract development, sourcing events, negotiations, execution, and post‑award contract management.

The candidate must be a US citizen or hold a green card. The candidate should have a Bachelor’s degree and experience in strategic sourcing or purchasing.

• Review and validate sourcing requests from stakeholders
• Ensure required information and compliance elements are in place
• Conduct vendor risk assessments
• Negotiate pricing and contract terms
• Run sourcing events (RFPs/bids) when required
• Execute purchase orders and assist with invoice issue resolution
• Manage supplier performance and recovery plans
• Maintain nuclear contract records and documentation (life-of-plant retention)

• Bachelor’s degree and experience in strategic sourcing or purchasing.
• Experience with contract negotiation and supplier management.
• Experience managing large projects and complex scopes.
• Proficiency in Microsoft Word (advanced formatting), Excel, and PowerPoint.
• CPSM (Certified Professional in Supply Management) or equivalent certification preferred.
• SAP experience strongly preferred.
• Experience with Coupa or other e-sourcing/contract management tools preferred.
• Familiarity with the nuclear industry is preferred.

One Tech Engineering is searching for a Project Controls Specialist for a position located in Kansas City, Missouri. The Project Controls Specialist will lead the project controls efforts and is responsible for the daily management of the project controls tasks.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in engineering, construction management or related field and 3 years of direct project controls experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Support the implementation and maintenance of the program reporting data warehouse and produce client facing program controls reports and data.
• Support clients in configuring program functions in the planning & controls software.
• Support program management through critical path scheduling, estimating, project cost management, forecasting, document control, and reporting across a program.
• Perform quality review and implementation of program execution manuals.
• Support quality review of Earned Value Management system reporting.
• Perform quality review, input and document changes and present cost management and forecast reports to program stakeholders.
• Input data to, document changes of, perform quality reviews of, and present cost management reports to program stakeholders.
• Develop and present a cash flow reports to program stakeholders.
• Analyze data, review logs, and run reports in the planning & controls software.
• Create Work Breakdown Structure (WBS), develop various levels of schedules, apply logic ties within the schedules, and perform schedule what-if scenarios to identify and proactively monitor progress risks.
• Develop and execute, review, and analyze pre-programmed program scheduling reports and supporting documentation for accuracy.
• Monitor resource loading of a schedule.
• Input and validate progress measurement and maintaining progress curves.
• Perform field audits to validate accuracy of reporting and processes.
• Support implementation and risk management processes by identifying and mitigating risk potentials to the project.
• Support the Interactive Program Planning Meetings (IPPM).
• Analyze forecasted program costs including performance against an established schedule with critical milestones.
• Serve as a point of contact for technical project controls questions from the program team.
• Assist senior controls personnel with updates to internally facing financial systems.
• Assist in communicating the impact of changes to internal financials as directed.
• Maintain effective relationships with existing and potential clients, customers and contractors.
• Performs other duties as assigned.
• Complies with all policies and standards. 

• Bachelor’s Degree in engineering, construction management or related field and 3 years of direct project controls experience.
• Applicable experience may be substituted for the degree requirement.  
• Experience with Oracle Primavera P6 preferred. 
• Excellent written and verbal communication skills. 
• Excellent interpersonal skills. 
• Proficient with Microsoft Office.  
• OSHA 10-hour safety certification or the ability to obtain.

One Tech Engineering is searching for an Electrical Engineer for a position located in Maple Grove, Minnesota. The Electrical Engineer will lead like-for-like replacements and upgrades of substation equipment, including breakers, switches, transformers, relays, bushings, and surge arresters.

The candidate must be a US citizen or hold a green card. The candidate should have a Bachelor’s degree and 5+ years of relevant electrical engineering experience.

• Perform troubleshooting and technical evaluations of substation equipment and systems.
• Initiate maintenance and upgrade projects and develop project scopes.
• Order materials and prepare material requisitions.
• Develop and adjust designs as needed for brownfield projects (no greenfield design work).
• Coordinate with construction teams to execute field work safely and efficiently.
• Manage project schedules and track progress to completion.
• Ensure clear communication with all stakeholders, including construction teams and substation maintenance personnel.
• Deliver scoped work packages, provide field coordination, and support the completion of replacement and maintenance activities.

• 5+ years of relevant electrical engineering experience.
• Bachelor’s degree in Electrical Engineering is required.
• Strong knowledge of substation equipment with field troubleshooting experience, or a demonstrated willingness to work in the field.
• Familiarity with brownfield substation replacement and maintenance workflows.
• Experience coordinating with stakeholders and initiating projects, including material ordering.
• Proficiency in SAP and ProjectWise.
• Field experience in substations and basic familiarity with PLC/logic programming is preferred.
• Professional Engineer (PE) license is preferred.

One Tech Engineering is searching for a Substation Construction Inspector for a position located in Amarillo, Texas. The Substation Construction Inspector will be responsible for verifying all work performed by the prime construction contractor complies with our construction standards and the engineering prints.

Candidates must be a US citizen or hold a green card. The candidate must have at least 5 years of substation construction experience.

Substation Construction Inspector Responsibilities:

• Responsible for capturing any field changes to the design.
• Responsible for communicating properly to the responsible parties within the Company on a routine or daily basis.
• Responsible for insuring the constructor performs the Work to the Company's specifications and standards.
• Responsible for insuring the constructor uses the proper materials in the proper place on the Project.
• Shall take all precautions to protect Company's equipment, materials and customers and be a good representative for Company.

Requirements of the Substation Construction Inspector:

• 5 + years of substation construction experience.
• Previous Journeymen or Substation Electrician experience is a plus.
• Excellent oral and written communication skills.

One Tech Engineering is searching for a Civil Designer for a position located in Kansas City, Missouri. The Civil Designer will perform various phases of planning, proposal preparation, site evaluations, analytical designs, report preparation, specifications, and preparation of construction documentation and environmental plans as part of a project team

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in drafting technology or a related field and 7 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

Civil Designer Responsibilities:

• Design civil engineering projects including site design, land development, roads, storm drainage systems, storm water management facilities, water and sanitary sewer utility design, sediment and erosion control, and traffic control, airports, and facility design.
• Develop drawings for production work including problem analysis, design layout and calculations on non-routine assignments of substantial variety and complexity.
• Execute variety of civil design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components and refining rough sketches.
• Execute changes to designs or sketches and mark-ups on ongoing projects.
• Analyze reports, maps, drawings, tests, and other topographical and geologic data to plan and design projects.
• Responsible for incorporating design codes and specifications related to design requirements.
• Review design drawings for quality assurance within scope, budget and schedule.
• Report volume calculations for excavation, dredging, and upland site grading.
• Review schedules, budgets and project criteria into civil design and layouts.
• Responsible for revisions of project drawings, plot files and project-related information storage in a logical and well-structured manner.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor’s degree in drafting technology or related field and 7 years related experience.
• Or an Associate’s Degree and 8 years related experience.
• Or 9 years of progressive detailing and design experience.
• Expert understanding of design software such as: AutoCAD, Civil 3D, MicroStation, and Excel to develop the design deliverables.
• Expert knowledge in design, calculations and design systems.
• Expert knowledge in the theory and practices of civil discipline; competent in the fundamental concepts of other disciplines as they relate to the assigned discipline; and capable of operating related discipline design software necessary to execute production tasks.
• Ability to work collaboratively with others (Project Managers, Engineers and Designers) in a multi-disciplinary project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
• Excellent written & verbal communication skills.
• Strong analytical and problem-solving skills, and attention to detail.

One Tech Engineering is searching for a Field Operations Manager for a position located in Wallingford, Connecticut; Newton, Massachusetts; Conshohocken, Pennsylvania; or Morristown, New Jersey. The Field Operations Manager will be responsible for the hiring, onboarding, resource assignment, mentoring, development, performance management, direction, and leadership of the Field Operations Department within the Northeast Region (NER) Construction Global Practice. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have 11 years of related professional experience in field construction.

Local candidates preferred or open to relocation. This is not a remote position.

• Adhere to and ensure the Field Operations Department adheres to company safety programs, training, and policies, as well as collaborate with the project team to manage the Safety & Health performance of project team members, contractors, and others as required.
• Support the implementation of new safety initiatives in line with the company’s Live Safer objective.
• Become LOTO certified through the company's LOTO certification program, and support certification of other qualified superintendents and site managers.
• Coordinate with Project Managers and Department Managers on Field Operations resource needs and lead the assignment of qualified Field Operations resources to EPC and Program Management projects.
• Coordinate with corporate construction leadership on assignment of Field Operations staff to project assignments.
• Coordinate with NER Construction Department Managers and the recruitment team to recruit, hire, and retain staff. 
• Lead interviews for Superintendents, Site Managers and Section Managers within the Field Operations department.
• Serve as Site Manager, including all responsibilities of a Site Manager, on strategic/critical projects.
• Support emerging needs for Field Operations on projects throughout the Northeast region.
• Lead onboarding, development, training, goal development, mentoring, and performance appraisals for the department.
• Interpret or establish policies and procedures, in collaboration with safety and quality departments.
• Demonstrate creativity, foresight, and judgment in anticipating and solving problems.
• Promote Global Practice and Department capabilities and support business development efforts, including client-facing meetings and presentations.
• Advance and develop Department tools and workflows to increase the efficiency of project execution.
• Assign work and review staff performance with teams to ensure quality and efficient, cost-effective utilization of staff.
• Recruitment, development, training, and retention of Field Operations personnel.
• Provide leadership, guidance, and instruction to the department.

• 11 years of related professional experience in field construction, or 7 years of related professional experience and a Bachelor's Degree in engineering, architecture, construction, or a related degree from an accredited program.
• 15 years of professional experience in construction management, specifically overseeing industrial construction projects, is preferred.
• Previous leadership, management, section manager, site manager or construction manager experience.
• Must demonstrate excellent oral and written communication skills, strong interpersonal skills, and the ability to clearly and effectively present complex information to all levels of employees, management, and clients. 
• Must be competent in the use of computer software (i.e., Microsoft Word, Excel, PowerPoint).
• Must be willing to travel.

One Tech Engineering is searching for a Senior Transmission Engineer for a position located in Houston or Austin, Texas. The Senior Transmission Engineer will lead the design of complex transmission line projects.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in Civil Engineering or a related degree from an ABET-accredited program and 7 years of transmission engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Lead transmission design of projects from the conceptual phase through design completion for project needs and requirements that are set forth by the project managers including EFM, Conductor Sizing, Induction, Impedance, Losses and Voltage Drop design.
• Prepare transmission equipment: packaged equipment specifications and data sheets, Request for Qualifications (RFQ's), technical bid summaries, and purchase recommendations.
• Lead economic conductor selection studies, lightning performance and grounding calculations/studies.
• Lead calculations for required electrical clearances based on NESC or other applicable codes and resources. Lead in the communication of the interpretation and application of necessary NERC, FERC and regional requirements and standards.
• Review transmission equipment vendor drawings; data interface with suppliers, clients other engineering disciplines, detailers, designers.
• Participate in development of project schedule, scope, budget staffing planning and construction planning.
• Responsible for effective management of change orders.
• Applies expert knowledge of commonly used transmission concepts, practices, codes and procedures within the transmission engineering services industry.
• Applies knowledge and experience to complex projects, find non-standard design solutions.
• Quality review production drawings for a variety of projects and project related data as required by the project managers to verify corrections are made within multiple CAD related software.
• Quality review the construction administration including coordination with field personnel to resolve design related installation issues, calculations, field inspections and testing of transmission systems.
• Leads field inspections, installation, measurements or calculations for public and private clients.
• Prepare and present technical reports for clients and industry publications.
• Build effective relationships with existing clients, customers and contractors and develop new business opportunities.
• Responsible for ensuring customer satisfaction goals and expectations are met.
• Participate sales and marketing efforts and identify key pursuits.
• Lead the development of cost proposals and qualification statements to achieve stated targets and standards for financial performance.
• Prepare and present project budgets and cost estimates.
• Report project performance.
• Provide leadership, guidance and instruction to the transmission engineering practice.
• Mentor and guide less experienced engineers.
• Responsible for QA/QC process adherence.
• Responsible for effective communication with other engineering disciplines.
• Responsible for compliance with company and site safety policies.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor's Degree in Civil Engineering or related degree from an ABET accredited program and 7 years of transmission engineering experience.
• Bachelor's Degree in Civil or related Engineering Technology from an ABET accredited program and successful completion of the Fundamentals of Engineering (FE) exam and 7 years of transmission engineering experience.
• Master's Degree in Engineering and 6 years of transmission engineering experience.
• Expert knowledge in standard engineering techniques and procedures.
• Strong knowledge of transmission design codes and computer skills (e.g. AutoCAD, MicroStation, BIM (Revit), Civil 3D, PLS, PLS-CADD, RISA-3D, MathCADD), and/or hydraulic, hydrologic, pavement, transmission analysis programs.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Strong computer skills (e.g. Microsoft Office Suite).
• Excellent written and verbal communication skills.
• Experience with leading the discipline design for large projects and delegating work tasks to team
  members.
• Ability to lead the execution of work and resolve issues in a team environment.
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Ability to perform quality reviews for detailed engineering documents and specifications.
• Ability to travel.
• Professional Engineer (PE) License preferred.

One Tech Engineering is searching for a Transmission Project Manager for a position located in Austin, Texas. The Transmission Project Manager will manage, direct, and coordinate all aspects of work related to overhead transmission

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in engineering or related field and 7 years of related experience, including 3 or more years of experience managing engineering projects in the Transmission & Distribution industry.

Local candidates preferred or open to relocation. This is not a remote position.

• Provide overall management of projects from concept to completion, including siting, environmental, permitting, planning, estimating, engineering, right-of-way acquisition, project controls, bid phase services, procurement, constructability reviews, material management, construction management, and closeout.
• Leverage existing client relationships, create new client relationships, and focus on repeat work within each Account.
• Prepare proposals, assist in presentations, and participate in contract negotiations.
• Develop and monitor project schedules, manage scope, and control project costs.
• Own internal project financials (detailed, accurate project cost forecast and accruals), staffing, legal coordination, risk management, change management, and human resource issues.
• Serve as primary point of contact with client regarding efforts such as client coordination, strategic planning, master scope management, budget finances, subcontracting, project staffing, environmental compliance, facility support and schedule attainment.
• Manage all aspects of project communication.
• Develop and implement project policies and procedures, establish project controls systems and implement the project execution plan.
• Work closely with the Project Team to ensure deliverables and services are being provided to client’s satisfaction and that projects are following internal QA/QC guidelines.
• Report regularly on progress, cost and schedule metrics, procurement issues, safety or environmental concerns, design questions, potential impacts, and any issues requiring office support. Travel to client and project locations is expected.
• Support the development of the Transmission team by assisting with hiring, training, and mentoring.
• Direct and coordinate activities of several disciplines on a project of moderate scope or a combination of smaller projects.
• Travel to client and project locations will be expected.
• All other duties as assigned

• Bachelor's degree in engineering or a related field from an accredited curriculum.
• Minimum of 7 years of related experience, including 3 or more years of experience managing engineering projects in the Transmission & Distribution industry.
• Completion of a master's degree in a related field may be substituted for one year of experience.
• Professional Engineering (PE) registration preferred.
  Project Management Professional (PMP) certification preferred.
• Strong analytical and problem-solving skills.
• Excellent oral and written communication skills and interpersonal skills.
• Must have the ability to clearly and effectively present complex information to all levels of employees, management, and clients.
• Must have experience with the production of transmission design and construction documents.
• Requires knowledge and experience working with the NESC code, as well as other industry codes and standards.
• Must be capable of devising new approaches to problems encountered.
• Demonstrated success in project management which includes proposal development, contract negotiations, project planning, design team coordination & communication, budgeting, schedule management, and client coordination.
• Proven ability to develop business and establish relationships with clients.
• Must have ability to deal effectively with a wide variety of industry, government and public contracts on project-related matters.
• Excellent written & verbal communication skills.  Strong analytical and problem-solving skills.
• Ability to travel.
• Valid driver's license required.
• In addition, must meet standards to qualify for and maintain the Company's vehicle driving privileges as outlined in the Company's Motor Vehicle Safety Policy.

One Tech Engineering is searching for a Senior Automation & Controls Engineer for a position located in Atlanta, Georgia. The Senior Automation & Controls Engineer will lead and execute Automation and Controls Engineering design activities for minor to major scale Engineering, Procurement, and Construction (EPC) projects in food, consumer products, pharmaceutical, life science, aerospace and industrial facilities. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Controls, Electrical, Mechanical, or Chemical Engineering or a related degree from an ABET-accredited program, and successful completion of the Fundamentals of Engineering (FE) exam and 7 years of electrical engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

Senior Automation & Controls Engineer Responsibilities:

• Responsible for compliance with company and project site safety policies.
• Design responsibility for all Automation and Controls scope on the project.
• Leads a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design. 
• Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines.
• Responsible for leading and developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization. 
• Responsible for commissioning and startup of those design deliverables.
• Lead and prepare controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details.
• Lead the specification, design, and procurement activities for control panel and equipment vendors, manage vendor progression, and lead the Factory Acceptance Tests (FATs).
• Lead and prepare electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules.
• Determine process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves.
• Utilize knowledge of various technologies for selecting the appropriate controls application.
• Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project.
• Develop and manage verification of design, calculations, project studies and report preparation.
• Interfaces directly with offsite design office and coordinates and tracks execution of controls deliverables to that office.
• Responsible for leading and performing quality reviews of project design submittals and coordinating those reviews within the department.
• Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry.
• Interfaces directly with construction personnel in development of contracts and execution of work.
• Develops project estimates at each project phase through various software such as Proposal works, Integrated Architecture Builder (IAB), SIL Solver, Bluebeam, Excel, and Visio.
• Supports project manager in the development and tracking of automation and controls project budgets and expected progress.
• Works with clients and vendors directly in developing design. 
• Builds effective relationships with existing clients, customers and contractors and develop new business opportunities.
• Responsible for ensuring customer satisfaction goals and expectations are met.  
• Provides leadership, technical direction and development to Automation and Controls team members.
• Assists in the day to day allocation of resources to their projects.
• Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems.
• Responsible for leading the technical execution and team during onsite start-up and commissioning activities.
• Responsible for developing and submitting discipline change notices as needed to the project management team.
• Fully understands and can execute the EPC project approach.
• Work with our business development team to identify and develop key project and customer pursuits.
• Frequently attends and hosts client events.
• Develops business strategies for future projects.  Understands business needs and profitability factors.
• Reviews and develops engineering hour estimates and proposals for all phases of the project.
• Supports the interviewing and hiring process for new team members.
• Coordinates workload with the Automation and Controls Department Manager.
• Complies with all company policies and standards.
• All other duties as assigned.

• Bachelor’s Degree in Controls, Electrical, Mechanical, or Chemical Engineering or related degree from an ABET-accredited program and successful completion of Fundamentals of Engineering (FE) exam and 7 years of electrical engineering experience.
  EPC project and Automation 7 Controls experience preferred.
• Master’s Degree in Electrical Engineering and 6 years of electrical engineering experience.
• EPC project experience preferred.
• Expert knowledge in standard engineering techniques and procedures. Strong knowledge of electrical equipment design ANSI and IEEE Standards.
• Strong computer skills (e.g. Microsoft Office Suite).
• Excellent written and verbal communication skills.
• Experience with leading the discipline design for large projects and delegating work tasks to team members.
• Ability to lead the execution of work and resolve issues in a team environment.
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment.
• Strong attention to detail, facilitation, team building, collaboration, organization, and problem-solving skills.
• Ability to perform quality reviews for detailed engineering documents and specifications.
• Ability to travel. accredited program.
• Must have or be able to obtain a Transportation Worker Identification Card (TWIC).
• Professional Engineer (PE) License Preferred.

• Knowledge of applicable design standards covering Automation & Controls Design/Engineering, such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A.
• Experienced with a variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS).
• Experience in Rockwell and Siemens PLC platforms. 
• Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms is a plus.
• SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus.
• MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS.
• Machine safety risk assessment and required PL design compliance to ISO13849 is a plus.
• Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus.
• Experience with PlantPAX and PackML is preferred.
• Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired.

One Tech Engineering is searching for a Project Manager for a position located in Denver, Colorado. The Project Manager will lead engineers while executing highly technical, complex projects including drinking water treatment facility, pump station, and water storage tank design/construction.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in engineering, construction management or related degree, and 7+ years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

Project Manager Responsibilities:

• Provide leadership and guidance through all aspects of engineering projects from concept to completion, including overall safety, quality, engineering, procurement, construction, permitting, project controls, and public/community relations.
• Collaborate and coordinate with multi-disciplinary project teams to provide deliverables and services that meet internal QA/QC requirements and client expectations.
• Serve as the primary point of contact for clients throughout each project, building a relationship as a trusted partner as the project progresses.
• Develop and monitor project schedules, manage scope, and plan for the financial success of your projects.
• Plan, organize, and communicate project personnel needs to department management.
• Communicate project progress, cost and schedule metrics, design questions, and project challenges requiring additional support to department management.
• Provide performance feedback for project team members as appropriate.
• Work to proactively identify and position the company for upcoming projects and opportunities; utilize business development skills to lead proposals, win new projects, and increase existing client base.
• Leverage existing client relationships and focus on repeat work within each client account.
• Manage the review, negotiation, approval, and execution of prime contracts, subcontracts, and change orders.
• Be visible in the regional water and wastewater marketplace through leadership and participation in professional organizations.
• Provide guidance and industry feedback or trends to the water leadership team.

• Bachelor's degree in engineering, construction management or related degree from accredited program required.
• Minimum of 7 years of related experience (10 years preferred) in design engineering, including 3 or more years of experience managing engineering projects.
  Completion of a master's degree in a related field may be substituted for one year of experience.
• Previous consulting experience preferred.
• Professional Registration preferred.
• Demonstrated success in project management strongly preferred.
• Proven ability to develop business and establish relationships with clients strongly preferred.
• Prior experience on construction project sites or executing program management in the industries of aviation, commercial, energy, government, manufacturing, oil & gas, process, transmission & distribution, or water is preferred.
• Excellent written and verbal communication skills and strong interpersonal skills.
• Must have the ability to clearly and effectively present complex information to all levels of employees, management, and clients.
• Strong analytical and problem-solving skills, and attention to detail.
• Must be capable of devising new approaches to problems encountered.
• Ability to influence, lead and manage change thoughtfully and positively strongly desired.
• Ability to thrive in a fast-paced, demanding work environment, ability to work overtime on short notice.
• Excellent computer skills and proficiency using Microsoft Office.
• Ability to work collaboratively with others (owners, contractors, engineers, designers) in a multi-disciplined project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
• Strong experience with document control, scheduling, cost control and project management software.

One Tech Engineering is searching for an Energy & Utility Consulting Director for a position located in Brea, San Diego, Walnut Creek, or Los Angeles, California. The Energy & Utility Consulting Director will manage and provide expertise and professional development to a team of consultants and analysts in managing project quality, schedule, cost control, contracts, subcontracts, proposals, estimates, and client relations.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in engineering, business, or a related degree and 13+ years of relevant consulting experience.

Local candidates preferred or open to relocation. This is not a remote position.

Energy & Utility Consulting Director Responsibilities:

• Organize and direct consulting projects, including pursuit, negotiation, execution, cost, schedule, and quality of deliverables.
• Facilitate workshop sessions with senior-level client teams to understand requirements, identify needs, and develop actionable plans.
•  Anticipate client challenges and provide strategic, innovative, and impactful solutions.
• Communicate effectively with project personnel and department management, coordinating with internal and external subject matter experts to pursue and deliver consulting projects.
• Serve as the primary point of contact for all project-related communications and client interactions.
• Compile, distribute, and present status reports covering project progress, schedule, cost, and budget impacts to internal and external stakeholders.
• Demonstrate curiosity, continuous learning, and a willingness to take strategic risks to drive personal and professional growth.
• Establish project teams, coordinate activities across multiple disciplines, and ensure efficient, cost-effective utilization of staff.
• Provide performance feedback to personnel managers and contribute to the development of training curricula and materials for consultants and analysts.
• Foster diverse perspectives, opinions, and experiences within project teams.
• Oversee third-party vendors and subcontractors, including contracts, scope, schedule, budget, and identification of upselling or cross-selling opportunities.
• Solve complex and ambiguous problems using modern tools, technologies, and best practices to create clarity and momentum.
• Ensure timely processing of prime contract, subcontractor, and supplier invoicing in alignment with agreements.
• Provide managerial direction and work assignments to consultants and analysts.

• Bachelor's degree in engineering, business, or a related field from an accredited program.
  MBA preferred.
• Minimum of 13 years of relevant consulting experience.
• Excellent business acumen with proven success managing consulting engagements.
• Strong analytical skills with the ability to interpret large data sets quickly and efficiently.
• Ability to uncover customer needs, develop recommendations and deliver them persuasively.
• Expert facilitation, collaboration, organization, and problem-solving skills.
• Strong understanding of financial concepts.
• Excellent planning and analytical skills.
• Must demonstrate excellent oral and written communication skills; strong interpersonal skills; and the ability to clearly and effectively present complex information to all levels of employees, management, and clients.

One Tech Engineering is searching for an Electrical Engineer for a position located in St. Louis, Missouri. The Electrical Engineer will be responsible for substation engineering and consulting services for clients across the US and internationally.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in Electrical Engineering or a related degree and 3 years of electrical engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

Electrical Engineer Responsibilities:

• Develop proposals and scopes of work, including conceptual designs and execution plans.
• Prepare engineering cost estimates, labor estimates, and project schedules.
• Complete physical substation design such as yard layouts, plans, sections, grounding systems, lightning protection, control building arrangements, interior/exterior raceways, auxiliary AC/DC power systems, and bills of material.
• Perform protection and control (P&C) design, including panel arrangements, one-line/single-line diagrams, three-line diagrams, AC schematics, DC elementaries, equipment wiring, and relay panel wiring.
• Prepare calculations and technical reports for engineering studies (e.g., grounding, lightning protection, AC/DC load studies).
• Develop equipment specifications for procurement and support factory acceptance testing (FAT).
• Coordinate design activities with cross-functional teams (Civil/Structural, Networks, Transmission Line, etc.).
• Provide guidance, mentorship, and technical support to junior team members.
• Collaborate and communicate regularly with clients and external stakeholders.
• Perform quality assurance reviews of designs prepared by engineers and designers.
• Provide short-term field support during construction phases.
• Support business development and marketing efforts as needed.
• Potential additional involvement in relay settings, 3D/intelligent design, or participation in industry/professional technical committees.
• Perform other duties as assigned.

• Bachelor's Degree in Electrical Engineering or related degree from an ABET-accredited program and 3 years of electrical engineering experience, consulting preferred.
• Or a Bachelor's Degree in Electrical or related Engineering Technology from an ABET-accredited program and successful completion of Fundamentals of Engineering (FE) exam and 3 years of electrical engineering experience, consulting preferred.
• Or a Master's Degree in Electrical Engineering and 2 years of electrical engineering experience, consulting preferred.
• Strong knowledge in standard engineering techniques and procedures.
• Excellent written and verbal communication skills.
• Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.
• Proficient in standard engineering techniques and procedures.
• Strong computer skills. (e.g. Microsoft Office Suite)
• Strong computer skills include AutoCAD, MicroStation, 2D and 3D rendering programs and other analysis programs.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Engineers in Training-EIT Certification preferred.

One Tech Engineering is searching for a Senior Electrical Engineer for a position located in St. Louis, Missouri. The Senior Electrical Engineer will lead electrical design project teams to create world class designs for new projects, alterations and redevelopments on a variety of projects including power, process, corporate, healthcare, pipeline, airports, institutional, industrial, manufacturing, government and military facilities. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s degree in Electrical Engineering or a directly related field, plus 7 years of experience in electrical systems studies in the electric utility or industrial power distribution industry.

Local candidates preferred or open to relocation. This is not a remote position.

• Executes complex assignments requiring the use of advanced electrical engineering techniques, resulting in the development of new or improved processes, equipment, and/or technological methods.
• Coordinate departmental or divisional project studies, reports, or project design assignments.
• Responsible for performing power system studies and system protection settings coordination on various projects (Up to 500-kV voltage level).
• Develop design basis documentation for protective settings and generate native relay configuration files.
• Conduct design reviews and support quality control.
• Assist the project manager in developing the scope of work and conceptual design for the projects.
• Train, guide, and mentor less experienced team members.
• Support business development and marketing initiatives.

• Bachelor’s degree in Electrical Engineering or a directly related field, plus 7 years of experience in electrical systems studies in the electric utility or industrial power distribution industry.
• Ability to obtain a Professional Engineer licensure.
• Previous experience in the development of protective relay settings in the Transmission or Distribution industry.
• Prior experience in commonly utilized system modelling software programs (ASPEN, CAPE, CYME, ETAP, SKM, etc.)
• Knowledge of protection schemes and philosophies commonly applied at Transmission and Distribution substations.
• Previous experience developing native relay setting files using SEL’s AcSELerator and GE’s Enervista software programs
• Ability to read and interpret electrical single lines, three lines, schematics, functional diagrams, etc.
• Prior experience designing calculations, including short circuit calculation, current transformer performance and ratio selection, over-current element coordination, zone-distance element selection and coordination, and relay loadability calculation.
• Ability to perform Grounding, Arc Flash, and other Power system studies is a plus.

One Tech Engineering is searching for a Senior Environmental Engineer for a position located in Houston, Dallas, Fort Worth, or Austin, Texas.. The Senior Environmental Engineer will lead and support a wide variety of environmental engineering projects, including stormwater management, hydraulic analyses, solid waste, remediation, sustainable solutions, design of environmental systems such as containment liners and water quality/treatment systems, and site development for buildings/facilities. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree and 7 years of environmental or civil engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Providing technical solutions for environmental or civil engineering projects.
• Performing calculations using industry-standard tools and software.
• Directing and reviewing work products prepared by junior engineering staff, which may include Preliminary Engineering Reports, Options Evaluations, Design Drawings, Calculations, Specifications, Work Plans, Construction Reports, and Cost Estimates.
• Design programs such as AutoCAD, Civil 3D, GIS, etc.
• Design of environmental systems and facilities.
• Lead or support of environmental or civil projects or tasks which may include earthwork/grading, stormwater, wastewater, remediation, waste management, and restoration.
• Preparing reports, studies, and cost estimates to help clients evaluate options and provide solutions.
• Project management duties such as developing and executing project scope, budget, schedule, quality, safety, and client expectations.
• Lead oversight of construction and preparation of construction quality assurance (CQA) reports.
• Internal and External Oral Presentations.
• Will train and mentor staff.
• Develop new and maintain existing client and regulatory relationships.
• Other duties, as assigned.

• Bachelor's degree in a related engineering program from an accredited university.
  7 years of environmental or civil engineering experience.
  PE license.
• Experience overseeing construction and strong understanding of construction methods and procedures preferred.
• Project management or assistant project management experience preferred.
• Available for travel as necessary (approximately 10% travel).
• Strong knowledge in standard environmental engineering techniques and procedures.
• Excellent written and verbal communication skills.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.

One Tech Engineering is searching for a Substation Project Manager for a position located in Austin, Texas. The Substation Project Manager will lead a team in the day-to-day management of project safety, quality, schedule, cost control, contracts, risk, suppliers, proposals, estimates, documentation turnover, client relations/management, field staff and other duties required to execute Design-Only, Engineer Procure Construct (EPC), Construction Management, Construction, and Program Management projects

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in engineering, construction management or a related degree from an accredited program and 7 years’ applicable experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Provide leadership and guidance of all aspects of multi-discipline engineering projects from concept to completion, including overall safety, quality, engineering, procurement, construction, environmental compliance, project controls, and public/community relations.
• Establish project teams, coordinate activities of multiple disciplines, and ensure the efficient, cost-effective utilization of staff.
• Manage all aspects of project communication.
• Lead the Project Management team in administering request for proposal (RFP) package development, bid and selection process, and scope of work documents.
• Develop and monitor project schedules, manage scope, and control project costs.
• Serve as the primary point of contact for clients regarding efforts such as client coordination, strategic planning, master scope management, budget finances, subcontracting, project staffing, environmental compliance, facility support and schedule attainment.
• Manage the review, negotiation, approval, and execution of prime contracts, subcontracts, and change orders.
• Lead internal and external project risk reviews and consult with Risk Department as required.
• Manage and approve internal and external reports, providing detailed, accurate project cost forecasts and accruals to client(s) and Global Practice leadership as required.
• Manage project controls efforts, including project cost reporting, scheduling, project work breakdown structure establishment, project set-up and closeout within the accounting system, and field progress tracking.
• Monitor progress on projects and provide input into areas of concern and direction or redirection to enhance achievement of project schedules, productivity of goals, budgets, quality, and overall profitability of the project.
• Responsible for managing contract closeout activities.
• Responsible for generating new business revenue by developing new client relationships or leveraging existing client relationships.
• Adhere to company safety programs, trainings, and policies, as well as promote and manage the safety and health performance of project team members and subcontractors.
• Participate in and attend industry-associated conferences and/or committees.
• Provide leadership, guidance, and instruction to less experienced staff.
• Responsible for QA/QC process adherence.
• Responsible for compliance with company and site safety policies.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor's Degree in engineering, construction management or related degree from an accredited program and 7 years of applicable experience.
• Prior experience on construction project sites or executing program management in the industries of aviation, commercial, energy, government, manufacturing, oil & gas, process, transmission & distribution, or water is preferred.
• Excellent written and verbal communication skills.
• Strong analytical and problem-solving skills, and attention to detail.
• Ability to thrive in a fast-paced, demanding work environment, ability to work overtime on short notice.
• Excellent computer skills and proficiency using Microsoft Office
• Ability to work collaboratively with others (owners, contractors, engineers, designers) in a multi-disciplined project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
• Strong experience with document control, scheduling, cost control and project management software.

One Tech Engineering is searching for a Transmission Engineer for a position located in St. Louis, Missouri; Akron, Ohio; or Columbus, Ohio. The Transmission Engineer will maintain a high attention to detail, possess working knowledge of Transmission Line design, demonstrate ownership of their work, drive for continual improvement, and collaborate effectively with their team and clients in order to make our clients successful.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor of Science in Engineering and 3 years of related transmission line design experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Design of high and extra-high voltage (69-500kV) transmission lines using PLS-CADD.
• Prepare construction documents including plan and profile drawings, structure loading trees, and foundation assembly drawings.
• Prepare specifications and project design criteria.
• Provide field support during construction.
• Build and maintain strong relationships with clients as well as provide technical leadership, guidance and instruction to less experienced staff members.
• Other duties as assigned.

• Bachelor of Science in Engineering from an ABET accredited program or Bachelor of Science in Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam.
• Master of Science degree in Civil Engineering may be substituted for 1 year experience.
• 3 years related transmission line design experience.
• Excellent written & verbal communication skills.
• Strong analytical and problem-solving skills.
• Experience in scheduling and budgeting.
• Ability to work in a team environment.
• Consulting or utility experience preferred.
• Experience in HVDC is a plus.

One Tech Engineering is searching for a Stakeholder Management Services Department Manager for a position located in Minneapolis, Minnesota. The Stakeholder Management Services Department Manager will be responsible for shaping and executing the practice’s vision and strategy, driving business development, overseeing project delivery, and providing overall leadership to ensure continued growth and success.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in environmental studies, geology, engineering or a related degree, and 7 years of related professional experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Identifies, develops and directs the implementation of the department's business strategies, including operational strategies and procedures, marketing and pricing strategy, and sales and customer retention strategy.
• Assists national leadership team in identifying, developing and directing the implementation of the business strategy enterprise-wide.
• Responsible for the profitable growth of the department; ensuring staff levels, staff loading, and staff assignments meet project requirements while maintaining billable goals.
• Achieves stated targets and standards for financial performance.
• Manages department budget and expenditure of funds.
• Prepares and presents workload and monthly financial reports to global practice or regional management and applicable project managers.
• Responsible for collaborating with business development managers, business line leaders, project managers, and proposal production staff on proposals to secure work for staff
• Champions safety and quality standards while promoting technical excellence and innovation.
• Responsible for maintaining the company safety program for the department.
• Adhere to and implement the company quality control program for the department.
• Provides leadership to the team; directs and coordinates work assignments and reviews performance to ensure the efficient, cost-effective utilization of staff.
• Provides expert-level technical, design guidance and support.
• Responsible for diversity initiatives.
  
• Provides leadership, guidance, and instructions to the department.
• Identifies, develops and invests in emerging leaders.
• Enables others to act, allocating appropriate decision-making authority and responsibility to others to maximize their professional growth.
• Can diffuse conflict; Encourages negotiation and workplace diplomacy.
• Generates enthusiasm, motivates and encourages others. Able to create a fun, challenging, and positive work environment with a culture of excellence.
• Makes difficult decisions and builds consensus when appropriate.
• Upholds and communicates employee-ownership culture, company policies, procedures and values.
• Recruitment, development, training and retention of staff, including setting performance goals, career development plans and conducting performance evaluations for assigned department staff.
• Responsible for interpreting policies, purposes and goals of the organization to staff.
• Implements, applies and supports company, global practice and/or regional office programs and initiatives; successfully navigating and managing change within the department.

• Bachelor's Degree in environmental studies, geology, engineering or related degree from an accredited program and 7 years of related professional experience.
• Previous leadership and/or management experience is preferable.
• Must demonstrate excellent oral and written communication skills, strong interpersonal skills, and the ability to clearly and effectively present complex information to all levels of employees, management, and clients.
• Position requires the ability to thoughtfully and positively influence, lead, and manage change.
• Must possess strong project management skills and a strategic perspective.
• Must be an expert in the use of computer software (i.e., Microsoft Word, Excel, PowerPoint).

One Tech Engineering is searching for an Electrical & Instrumentation Department Manager for a position located in Appleton, Wisconsin. The Electrical & Instrumentation Department Manager will provide leadership to the team; direct and coordinate work assignments and review performance to ensure the efficient, cost-effective utilization of staff.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in construction management, engineering, or a related field and 7 years of direct experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Responsible for profitable growth of the department; ensuring staff levels, staff loading, and staff assignments meet project requirements while maintaining billable goals.
• Implement, apply and support company, global practice and/or regional office programs and initiatives; successfully navigating and managing change within the section.
• Provide expert level technical, design guidance and support.
• Achieve stated targets and standards for financial performance.
• Manage department budget and expenditure of funds.
• Prepare and present workload and monthly financial reports to global practice or regional management and applicable project managers.
• Responsible for collaborating with department managers, business development managers, business line leads, project managers, and proposal production staff on proposals to secure work for staff
• Responsible for collaborating with business development managers, business line leads, project managers, and proposal production staff on proposals to secure work for staff.
• Responsible for the recruitment, development, training, and retention of staff.
• Responsible for conducting performance evaluations for department staff.
• Provide leadership, guidance, and instruction to the department.
• Responsible for interpreting the organization's policies, purposes, and goals to staff.
• Responsible for overall QA/QC process adherence.
• Enforce compliance with company and site safety policies.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor's degree in construction management, engineering, or related field and 7 years of direct experience required.
• Applicable experience may be substituted for the degree required.
• Proficient with Microsoft Office.
• Experience with Oracle Primavera P6 preferred.
• Excellent attention to detail.
• Excellent written and verbal communication skills.
• Excellent interpersonal skills.
• Ability to work independently, think creatively and analytically, and make quick and sound decisions.

One Tech Engineering is searching for a Siting & Routing Project Manager for a position located in Chicago, Illinois. The Siting & Routing Project Manager will support, manage, and develop business for electric transmission line routing studies, environmental surveys, National Environmental Policy Act (NEPA) analysis, and land use planning/permitting services.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a B.S. or M.S. in Environmental Science or Studies, Land Use Planning/Urban Planning, Natural and/or Cultural Resource Management, and 7 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Manage permit applications and analyze environmental data supporting the development of environmental documents and studies for various types of projects, including high-voltage transmission lines, renewables, power generation construction activities, and gas transmission.
• Prepare routing studies and evaluations pursuant to regulatory requirements for applicable state applications.
• Prepare environmental studies/evaluations, impact analysis, and NEPA documentation for projects serving a variety of markets.
• Conduct pre-application meetings with jurisdictions, interact effectively with county and local officials, prepare and submit land use permits, and prepare material for public open houses and public outreach.
• Work independently and demonstrate a high level of competence in the area of technical report writing related to NEPA compliance as well as other types of technical reports and regulatory (Federal, state, local) permitting documents.
• Work with clients, resource agencies, environmental and technical staff to prepare environmental documents and related technical studies.
• Develop, cultivate, and strengthen existing and new client relationships.
• Other duties as assigned.

• B.S. or M.S. in Environmental Science or Studies, Land Use Planning/Urban Planning, Natural and/or Cultural Resource Management or related field from an accredited program.
• Minimum 7 years related professional experience in a wide variety of areas, ranging from leading and managing technical teams, project management, business development, and the ability to effectively balance direct and indirect utilization rates.
• Minimum of 7 years of experience with routing or siting studies, environmental permitting, National Environmental Policy Act (NEPA) documents, Certificate of Public Convenience and Necessity (CPCN) documentation, or Energy Facility Siting and Licensing and associated testimony support is highly preferred.
• Ability to clearly communicate both verbal and written technical information and work effectively with various audiences (including public officials, agency representatives, property owners, businesses, clients, construction contractors, etc.).
• Experience with the resources and regulatory agencies in Ohio, Indiana, Kentucky, and/or other PJM states (preferred).
• Ability to clearly communicate both verbal and written technical information and work effectively with various audiences (including public officials, agency representatives, property owners, businesses, clients, construction contractors, etc.).
• Solid time management and follow-through skills, with the ability to simultaneously work on and manage multiple tasks/projects with tight deadlines.
• Strong analytical and problem-solving skills.
• Ability to travel up to 20%, as required.

One Tech Engineering is searching for a Transmission and Distribution (T&D) Superintendent for a position located in Springfield, Ohio. The T&D Superintendent is responsible for field operations on the assigned project(s) in order to achieve safe, timely and profitable completion of each project.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree and 7 years construction management experience or craft supervision experience on T&D projects.

Local candidates preferred or open to relocation. This is not a remote position.

• Plans, organizes, and supervises specific portions of construction work for an assigned area of a construction project.
• Maintains continuity of job progress and maximizes efficiencies related to the assigned area.
• Responsible for the oversight of the following project work activities: high voltage transmission lines, transmission line steel and wood structures, drilled piers, spread footings, grounding, environmental requirements, substation equipment, substation structures, substation electrical, and substation controls.
• Responsible for overall supervision of construction effort, which includes: safety, productivity of crafts, efficient use of materials and equipment, materials management, scheduling, engineering, and contractual performance of the project.
• Responsible for subcontractor contractual compliance on designated T&D construction related activities.
• Build effective client and subcontractor relationships.  Interface with client representatives, A/E representatives, and other contractors.
• Collaborate with project management to develop and implement project procedures, working documents, and standards.
• Authorize purchase requisitions, field design change requests, etc., under supervision of Construction Manager and Project Manager.
• Responsible for overall project safety.  Reviews and audits site specific safety documentation, including Pre-Task Analysis (PTAs) and Task Safety Observations (TSOs) on a regular basis.
• Complete daily field reports and take daily pictures to document construction progress.
• Assess future work activities and identify any concerns with work plans by utilizing subcontractors 3-week look ahead report.
• Develop a marked-up and as-built set of drawings to produce the record set documents, and answer RFIs with assistance from Assistant Project Manager or Field Engineer.
• Direct and manage subcontractor as necessary to comply with the established project schedule, and track and verify subprogress on an installed quantity and work hour basis.
• Verify material deliveries meet specifications and are being stored properly, and required preventative maintenance and/or temporary heating is being performed by the subcontractor (this potentially is coordinated with the Materials Manager).
• Coordinate with the QA/QC Manager to verify all welders on site are qualified to weld on the project.
• Witness all equipment setting and alignment.
• Walk down all systems prior to, during, and post hydrostatic testing to verify compliance with drawings and specifications and signing off on completed system testing and restoration.
• Develop punch lists of items out of compliance or not completed.
• Verify the most current drawing revisions are being used in the field.
• Understand and execute the project scope and any changes that develop. Ensure field change orders are executed.
• Oversee craft supervision and project staffing as required.

• Bachelor’s Degree and 7 years construction management experience or craft supervision experience on T&D projects.
• Or Associate’s Degree and 9 years construction management experience or craft supervision experience on T&D projects.
• Or High School Diploma GED and 11 years construction management experience or craft supervision experience on T&D projects.
• Must have excellent communication skills, strong leadership skills, and a strong safety background.
• Computer proficiency in Microsoft Suite.
• Must be able to meet company's driving requirements

One Tech Engineering is searching for a Senior Automation and Controls Engineer for a position located in Kansas City, Missouri. The Senior Automation and Controls Engineer will be responsible for executing automation and controls deliverables for project(s) in the front end, detailed design, construction, and start-up phases

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Controls, Electrical, Mechanical, or Chemical Engineering, or a related degree, successful completion of the Fundamentals of Engineering (FE) exam, and 7 years of experience in electrical engineering.

Local candidates preferred or open to relocation. This is not a remote position.

Senior Automation and Controls Engineer Responsibilities:

• Responsible for compliance with company and project site safety policies.
• Design responsibility for all Automation and Controls scope on the project.
• Leads a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design. 
• Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines.
• Responsible for leading and developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization. 
• Responsible for commissioning and startup of those design deliverables.
• Lead and prepare controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details.
• Lead the specification, design, and procurement activities for control panel and equipment vendors, manage vendor progression, and lead the Factory Acceptance Tests (FATs).
• Lead and prepare electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules.
• Determine process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves. Utilize knowledge of various technologies for selecting the appropriate controls application.
• Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project.
• Develop and manage verification of design, calculations, project studies and report preparation.
• Interfaces directly with offsite design office and coordinates and tracks execution of controls deliverables to that office.
• Responsible for leading and performing quality reviews of project design submittals and coordinating those reviews within the department.
• Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry.
• Interfaces directly with construction personnel in development of contracts and execution of work.
• Develops project estimates at each project phase through various software such as Proposal works, Integrated Architecture Builder (IAB), SIL Solver, Bluebeam, Excel, and Visio.
• Supports project manager in the development and tracking of automation and controls project budgets and expected progress.
• Works with clients and vendors directly in developing design. 
• Builds effective relationships with existing clients, customers and contractors and develop new business opportunities.
• Responsible for ensuring customer satisfaction goals and expectations are met. 
• Provides leadership, technical direction and development to Automation and Controls team members.
• Assists in the day to day allocation of resources to their projects.
• Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems.
• Responsible for leading the technical execution and team during onsite start-up and commissioning activities.
• Responsible for developing and submitting discipline change notices as needed to the project management team.
• Fully understands and can execute the EPC project approach.
• This position will require making trips to job sites to survey, support installations, and lead startups (travel about 30%).
• Work with our business development team to identify and develop key project and customer pursuits.
• Frequently attends and hosts client events.
• Develops business strategies for future projects.  Understands business needs and profitability factors.
• Reviews and develops engineering hour estimates and proposals for all phases of the project.
• Supports interviewing and hiring process for new team members.
• Coordinates workload with Automation and Controls Department Manager.
• Complies with all company policies and standards.
• All other duties as assigned.     

• Bachelor’s Degree in Controls, Electrical, Mechanical or Chemical Engineering or related degree from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam and 7 years electrical engineering experience.
• Expert knowledge in standard engineering techniques and procedures.
• Strong knowledge of electrical equipment design ANSI and IEEE Standards. Strong computer skills (e.g. Microsoft Office Suite).
• Excellent written and verbal communication skills.
• Experience with leading the discipline design for large projects and delegating work tasks to team members.
• Ability to lead execution of work and resolve issues in a team environment.
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Ability to perform quality reviews for detailed engineering documents and specifications.
• Must have or be able to obtain a Transportation Worker Identification Card (TWIC).
• Professional Engineer (PE) License preferred.

• Ability to perform quality reviews for detailed engineering documents and specifications.
  
• Knowledge of applicable design standards covering Automation & Controls Design/Engineering such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A.
  
• Experienced with variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS).
  
• Experience in Rockwell and Siemens PLC platform.  Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms a plus.
  
• SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus.
  
• MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS.
  
• Machine safety risk assessment and required PL design compliance to ISO13849 is a plus.
  
• Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus.
  
• Experience with PlantPAX and PackML is preferred.
  
• Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired.

One Tech Engineering is searching for an Automation and Controls Engineer for a position located in either Kansas City, Missouri; St. Louis, Missouri; or Atlanta, Georgia. The Automation and Controls Engineer will execute automation and controls engineering design activities for minor to major scale Engineering, Procurement, and Construction (EPC) projects.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Controls, Electrical, Mechanical or Chemical Engineering or a related degree, successful completion of the Fundamentals of Engineering (FE) exam, and 3+ years of electrical engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

Automation and Controls Engineer Responsibilities:

• Responsible for compliance with company and project site safety policies.
• Works with a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design. 
• Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines.
• Responsible for developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization. 
• Responsible for commissioning and startup of those design deliverables.
• Develop controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details.
• Develop electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules
• Develop the specification and design requirements for control panel and equipment vendors, track vendor progression, and lead the Factory Acceptance Tests (FATs).
• Experience with process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves.
• Utilize knowledge of various technologies for selecting the appropriate controls application.
• Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project.
• Develop verification of design, calculations, project studies, design basis and report preparation.
• Interfaces directly with offsite design office and coordinates and tracks execution of all electrical controls department work to that office.
• Responsible for performing quality reviews of project design submittals.
• Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry.
• Interfaces directly with construction personnel in development of contracts and execution of work.
• Tracks Automation and Controls design efforts against budgets and expected progress.
• Works with clients and vendors directly in developing design and builds lasting business relationships.
• Responsible for leadership and guidance of less experienced team members.
• Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems.
• Responsible for technical execution during onsite start-up and commissioning activities.
• Develops and submits discipline change notices as needed to the project management team.
• Understands the basics of the EPC project execution methodology.
• This position will require making trips to job sites to survey and support installations and startups (travel about 30%).
• Begins to understand and utilize automation project sales strategies and develops client relationships.
• Understands and assists in automation standards development for the department.
• Participates in interviews for early career team members.
• Assists in the development of engineering hour estimates and proposals for all phases of the project
• Coordinates workload with the Automation and Controls Department Manager.
• Complies with all company policies and standards.
• All other duties as assigned.     

• Bachelor’s Degree in Controls, Electrical, Mechanical or Chemical Engineering or related degree from an ABET-accredited program and successful completion of Fundamentals of Engineering (FE) exam and 3+ years of electrical engineering experience.
• EPC project and Automation 7 Controls experience preferred.
• Expert knowledge in standard engineering techniques and procedures.
• Strong knowledge of electrical equipment design, ANSI and IEEE Standards.
• Strong computer skills (e.g. Microsoft Office Suite).
• Excellent written and verbal communication skills.
• Experience with leading the discipline design for large projects and delegating work tasks to team members.
• Ability to lead the execution of work and resolve issues in a team environment.
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Ability to perform quality reviews for detailed engineering documents and specifications.
• Must have or be able to obtain a Transportation Worker Identification Card (TWIC)
• Professional Engineer (PE) License Preferred.

• Ability to perform quality reviews for detailed engineering documents and specifications.
  
• Knowledge of applicable design standards covering Automation & Controls Design/Engineering such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A.
  
• Experienced with variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS).
  
• Experience in Rockwell and Siemens PLC platform.  Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms a plus.
  
• SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus.
  
• MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS.
  
• Machine safety risk assessment and required PL design compliance to ISO13849 is a plus.
  
• Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus.
  
• Experience with PlantPAX and PackML is preferred.
  
• Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired.

One Tech Engineering is searching for a Senior Estimator for a position located in Houston, Texas. The Senior Estimator will be responsible for developing self-perform estimates for transmission and distribution bids, mainly for substations. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Engineering, Construction Management or related field and 7 years of direct project estimating experience.

Local candidates preferred or open to relocation. This is not a remote position.

Senior Estimator Responsibilities:

• Develop bottoms up estimates for transmission and distribution bids (mainly substations)
• Focus will be mainly on high voltage scope vs. civil and foundations.
• Develop estimate schedules to manage workload and ensure timely completion of estimates.
• Review RFP and engineering documents.
• Responsible for detailed documentation of quantity take-offs and constructability analysis.
• Responsible for the accuracy and validity of estimate assumptions.
• Develop high level project schedules (e.g. using Excel).
• Develop risk registers and assist risk review process.
• Review commercial terms and conditions and address risk issues.
• Responsible for compliance with estimating methodology ensuring quality estimates are produced.
• Lead project team review for estimating quantities and scope of project.
• Responsible for reviewing and incorporating quotes for vendors, subcontractors, bonds and insurance.
• Lead subcontractor solicitation and bid reviews.
• Review and verify subcontractor bid packages before being transmitted for quotes.
• Responsible for reviewing and incorporating specialty and standard equipment and material quotes.
• Estimate general conditions, indirect costs and review with project management team.
• Responsible for the review of final estimate and presentation to management.
• Make recommendations as to contingency and escalation.
• Provide estimated hours for required estimating effort and review with Section Manager
• Review and validate value engineering items, alternates and options.
• Lead estimating teams for completion of pre-construction services.
• Responsible for updating cost history and data base management.
• Train and mentor staff.
• All other duties as assigned.

• Bachelor's Degree in Engineering, Construction Management or related field and 7 years of direct project estimating experience.
• Applicable experience may be substituted for the degree requirement.
• Ability to work independently or in groups, think creatively and analytically, and make quick and sound decisions.
• Excellent written and verbal communication skills.
• Expert with Microsoft Office, ConEst and K-base.
• OSHA 10-hour certification required.

Preferred: 

• 4 years of self-perform substation estimating experience.
• 8 years of experience with transmission & distribution EPC or construction contractors estimating in the field.
• Must have extensive knowledge and experience developing estimates and bidding transmission and distribution construction work.

One Tech Engineering is searching for an Electrical Engineer for a position located in Wallingford, Connecticut; Newton, Massachusetts; Conshohocken, Pennsylvania; or Morristown, New Jersey. The Electrical Engineer will responsible for the design of high voltage electrical substations.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a bachelor’s degree in electrical engineering or related degree and 3 years of electrical engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

Electrical Engineer Responsibilities:

• Preparation of proposals and scope development, including conceptual designs and execution plans.
• Prepare engineering cost and labor estimates and schedules.
• Physical substation design including yard layouts, plans, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of material.
• Protection and control design including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiring.
• Preparing calculations and reports for engineering studies. (grounding, lightning protection, AC/DC load studies, etc.)
• Preparing equipment specifications for procurement and/or factory acceptance testing.
• Coordinating design activities with other departments. (Civil/Structural, Networks, Transmission Line, others.)
• Providing guidance and mentoring to less experienced team members.
• Regularly meeting with and corresponding with clients or outside personnel.
• Performing quality reviews for other engineers and designers.
• Providing short-term field support during construction.
• Supporting business development and marketing initiatives.
• Other areas of involvement may include relay settings, 3D/intelligent design, or industry/professional technical committee involvement.
• Performing other duties as assigned.

• Bachelor's Degree in Electrical Engineering or related degree and 3 years of electrical engineering experience.
• Or a Bachelor's Degree in Electrical or related Engineering Technology and successful completion of the Fundamentals of Engineering (FE) exam and 3 years of electrical engineering experience required.
• Consulting experience preferred.
• Strong knowledge in standard engineering techniques and procedures.
• Excellent written and verbal communication skills.
• Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.
• Proficient in standard engineering techniques and procedures.
• Strong computer skills (e.g. Microsoft Office Suite)
• Strong computer skills include AutoCAD, MicroStation, 2D and 3D rendering programs and other analysis programs.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Engineers in Training-EIT Certification preferred.

One Tech Engineering is searching for a Construction Manager for a position located in Becker, Minnesota. The Construction Manager is responsible for preconstruction support with project management, including drawing and spec reviews, contract/submittal reviews as well as additional front end pre planning work.

The candidate must be a US citizen or hold a green card. The candidate should have 5-7 years of renewable experience with battery backup knowledge.

• Meet with inspectors and the construction team to discuss daily objectives, focusing on any critical tasks such as mass grading or utility installations.
• Review construction drawings and specifications, ensuring that all team members understand the project requirements.
• Check contract and submittal reviews, addressing any issues that may have arisen.
• Provide updates to the hiring leader and project management regarding progress, challenges, and any adjustments needed for the project timeline.
• Oversee the installation of city utilities and internal private utilities, ensuring quality standards are met.
• Conduct inspections of ongoing work, including underground wiring, to confirm compliance with safety and engineering specifications.
• Manages multiple projects and orchestrates the results to achieve a broad program goal.
• Plans and implements schedules and monitors program from inception through delivery ensuring all deadlines are met.
• Defines and reports program status, development issues and success metrics.
• Identifies and monitors areas of risk. Continuously seeks opportunities to improve cost, performance and schedule.
• Facilitates communication and coordination among projects.
• Manages stakeholder engagement and satisfaction.
• Maintains awareness of trends, business conditions and internal process and practices impacting component projects or overall program.
• Adheres to standard project management methodologies and reporting techniques.

• 5-7 years of renewable experience with battery backup knowledge.
• Experience with project management, technical knowledge in Construction, communication and coordination skills
• Leadership and mentorship skills
• Quality and safety assurance experience
• Proficient in MS Office and SharePoint, and Bluebeam.
• Strong communication skills.