Project Manager

One Tech Engineering is searching for a Category Manager for a position located in Denver, Colorado, or Minneapolis, Minnesota. The Category Manager will be responsible for managing sourcing events, supplier relationships, contract negotiations, stakeholder engagement, and category strategy execution.

The candidate must be a US citizen or hold a green card. The candidate should have 8+ years of Category Management, Strategic Sourcing, or Procurement experience.

• Managing sourcing projects and procurement activities.
• Supporting stakeholders and business partners.
• Working with suppliers and internal customers.
• Managing multiple projects and priorities simultaneously.
  
  

• 8+ years of Category Management, Strategic Sourcing, or Procurement experience.
• Experience supporting Professional Services categories preferred.
• Supply Chain background strongly preferred.
• Stakeholder relationship management.
• Strong communication skills.

One Tech Engineering is searching for a Project Coordinator for a position located in Minneapolis, Minnesota. The Project Coordinator will support Demand Side Management (DSM) within the Energy Efficiency and Demand Response organization.

The candidate must be a US citizen or hold a green card. The candidate should have 1–3 years of experience in data entry, operations, or administrative support.

• Support Residential Saver Switch program activities.
• Support AC Rewards (smart thermostat program) processing and administration.
• Provide limited support for Commercial Saver Switch activities.
• Assist with EV rebates, energy efficiency rebate programs, pilot initiatives, and Windsource enrollments during lower-volume periods.
• Process high-volume rebate transactions and program-related requests.
• Perform operational program administration tasks to ensure accuracy and timeliness.

• 1–3 years of experience in data entry, operations, or administrative support.
• Experience in high-volume, shared-queue environments or operational/program processing.
• Strong analytical and data validation skills.
• Experience working in a large corporate or cross-functional environment.
• Utility or rebate program experience preferred.
• Familiarity with PDF handling, scanning, and document management/conversion.
• Salesforce experience is a plus.

One Tech Engineering is searching for a Project Manager for a position located in Denver, Colorado, or Amarillo, Texas. The Project Manager will oversee consultants conducting protection coordination studies by managing project plans, financial forecasts, progress tracking, and reporting to support wildfire mitigation efforts.

The candidate must be a US citizen or hold a green card. The candidate should have 2–5 years of project management or related experience.

• Manages the entire project lifecycle from project definition through implementation.
• Accountable for meeting agreed upon scope, cost, schedule and quality measures.
• Develops project plans and drives project milestones.
• Establishes effective communication plan with project team and key stakeholders.
• Provides day-to-day directions to project resources and ensures the project teams are provided the resources and support that enable the teams to reach their defined objectives.
• Ensures effective management changes occurs throughout the course of the project.
• Responsible for preparation of documentation and status reports.
  
  

• 2–5 years of project management or related experience.
• Experience with financial management, including accruals and forecasting.
• Ability to manage multiple workstreams and competing priorities.
• Knowledge of electric distribution systems and utility operations.
• Proficiency in Microsoft Office Suite.
• Experience with SAP preferred.
• Background supporting electric distribution or system protection projects preferred.

One Tech Engineering is searching for a Program Manager for a position located near Tracy, Minnesota. The Program Manager will provide quality oversight on-site, ensuring EPC contractors and vendors comply with quality standards, procedures, specifications, and applicable codes.

The candidate must be a US citizen or hold a green card. The candidate should have 5+ years of QA/QC or construction quality oversight experience.

• Review EPC quality programs, policies, procedures, inspection plans, and turnover documentation.
• Ensure compliance with ASME B31.1 and B31.3 standards related to power, steam, and process piping.
• Perform field audits, site walks, and inspections to verify contractor adherence to quality procedures.
• Support and review welding oversight activities and code compliance.
• Identify hold points, witness points, and critical inspection/testing milestones.
• Witness hydrotests, pressure testing, and rotating equipment installation activities.
• Provide coaching and subject matter expertise to inspectors and project teams.
• Coordinate with EPC quality managers, inspectors, vendors, and GE Vernova personnel.
• Support supplier and fabrication oversight activities as needed.
  
  

• 5+ years of QA/QC or construction quality oversight experience.
• Experience supporting large construction or energy infrastructure projects.
• Strong knowledge of welding oversight and code compliance.
• Experience with ASME B31.1 and B31.3 standards.
• Auditing and quality surveillance experience.
• Experience with hydrotests, pressure testing, and rotating equipment installation.
• Strong communication and non-authoritative leadership skills.
• Ability to work cross-functionally with EPC contractors, inspectors, and vendors.
• Proficiency with Microsoft Office Suite.
• Former or current AWS Certified Welding Inspector (AWS CWI) is nice to have.
• ASNT VT2 certification experience is nice to have.
• Experience with API and/or ACI standards is preferred.
• Previous background with civil concrete inspections, rebar, forms, and concrete oversight is preferred.

One Tech Engineering is searching for an E&C Engineer for a position located near Earth, Texas. The E&C Engineer will be overseeing and contributing to large-scale wind projects.

The candidate must be a US citizen or hold a green card. The candidate should have 9+ years of civil engineering experience with 5-7 years specifically in renewable generation.

• Provide civil engineering expertise across multiple projects, with a focus on reviewing project drawings and managing Requests for Information (RFIs).
• Evaluate engineering submittals, including drawings, studies, calculations, and technical analyses, to ensure compliance with project requirements and specifications.
• Collaborate with engineers, contractors, project managers, and other stakeholders to clarify project requirements and resolve technical issues.
• Review and interpret design drawings to ensure construction activities align with approved engineering designs.
• Identify and communicate variances from company master specifications and coordinate internal approvals as required.
• Manage and resolve RFIs, non-conformance requests, and other construction-related technical inquiries.
• Provide technical support during construction by answering civil engineering questions and clarifying design intent.
• Assist with troubleshooting and resolving civil engineering issues that arise in the field.
• Monitor construction activities to verify compliance with design drawings, project standards, and engineering requirements.
• Coordinate with multidisciplinary engineering teams to support project planning, design review, and construction execution.
• Support quality assurance efforts by ensuring technical documentation and construction practices meet established standards.
• Participate in project reviews, inspections, and field visits as needed to support successful project delivery.
  
  

• Bachelor’s degree in Civil Engineering.
• 9+ years of civil engineering experience with 5-7 years specifically in the renewable generation project space (construction or engineering design).
• Previous experience working with utilities, EPC contractors, or engineering/design firms supporting renewable energy projects.
• Knowledge of or familiarity with NCRs (Non-Conformance Reports), RFIs (Requests for Information), and the ability to understand, interpret, and manage contract scope.
• Strong written and verbal communication skills.
• Familiarity with ProjectWise, Microsoft Office Suite, Bluebeam, and Procore preferred.
• SAP experience is a plus.
• Professional Engineer (PE) license or an Engineers-in-Training (EIT) certification is preferred.

One Tech Engineering is searching for an E&C Engineer for a position located near Earth, Texas. The E&C Engineer will oversee and contribute to large-scale renewable projects, including solar and wind projects.

The candidate must be a US citizen or hold a green card. The candidate should have 3+ years of electrical engineering experience with 2-3 years specifically in the renewable generation project space.

• Provide electrical engineering expertise with a primary focus on reviewing project drawings, evaluating technical submittals, and managing Requests for Information (RFIs) across multiple renewable energy projects.
• Collaborate with engineers, contractors, and project stakeholders to ensure project requirements are clearly defined and appropriately addressed through submittals and RFIs.
• Review and evaluate engineering drawings, studies, calculations, and technical analyses to verify compliance with project specifications, design requirements, and industry standards.
• Identify and communicate variances from company master specifications and coordinate internal approvals with the appropriate engineering teams.
• Support construction activities by serving as a technical resource for field personnel, answering electrical engineering questions, clarifying design intent, and assisting with troubleshooting efforts.
• Interpret engineering and construction drawings to ensure installation activities align with approved project designs and specifications.
• Review, resolve, and manage RFIs, Non-Conformance Reports (NCRs), and other technical issues that arise during project execution.
• Monitor construction compliance with engineering designs, contract requirements, and project specifications.
• Work closely with project engineers and cross-functional teams throughout all phases of the project lifecycle, from planning and design review through construction and commissioning support.
• Provide both office-based engineering review and field-based construction support as project needs require.
  
  

• Bachelor’s degree in Electrical Engineering.
• 3+ years of electrical engineering experience with 2-3 years specifically in the renewable generation project space (construction or engineering design).
• Previous experience working with utilities, EPC contractors, or engineering/design firms supporting renewable energy projects.
• Knowledge of or familiarity with NCRs (Non-Conformance Reports), RFIs (Requests for Information), and the ability to understand, interpret, and manage contract scope.
• Strong written and verbal communication skills.
• Familiarity with ProjectWise, Microsoft Office Suite, Bluebeam, and Procore preferred.
• SAP experience is a plus.
• Professional Engineer (PE) license or an Engineers-in-Training (EIT) certification is preferred.

One Tech Engineering is searching for a Mechanical Construction Supervisor for a position located near Earth, Texas. The Mechanical Construction Supervisor will oversee and inspect EPC contractor work to ensure compliance with drawings, specifications, and contract requirements.

The candidate must be a US citizen or hold a green card. The candidate should have  7–10 years of experience in Mechanical Construction oversight.

• Oversight of mechanical construction activities.
• Perform quality inspections using ArcGIS / Survey123 and inspection templates
• Verify EPC contractor work meets contract and design requirements
• Document inspection results and findings in the company systems
• Participate in daily Plan of the Day (POD) meetings
• Coordinate inspection readiness with EPC contractor.
  
  

• 7–10 years of experience in Mechanical Construction oversight.
• Strong background in quality control inspections.
• Power plant experience (gas, coal, or similar) strongly preferred.
• Combustion turbine experience a plus, but not required.
• Experience with ArcGIS, Survey123, or Procore preferred.
• Valid driver’s license and ability to pass a criminal background check.

One Tech Engineering is searching for a Project Analyst for a position located in Denver, Colorado. The Project Analyst will support the Gas Capital Portfolio through analysis of project and operational data.

The candidate must be a US citizen or hold a green card. The candidate should have previous experience in data analysis, business analysis, financial analysis, or a similar analytical role.

• Extract and review project and operational data
• Analyze trends, variances, and performance metrics
• Investigate data anomalies
• Create reports and dashboards
• Validate data accuracy
• Present findings to leadership
• Support decision-making with analytical insights
• Partner with business stakeholders to answer operational questions

• 3+ years of experience in data analysis, business analysis, financial analysis, or a similar analytical role.
• Strong ability to analyze and interpret data, identify trends and variances, and provide actionable business insights.
• Experience translating complex data into clear recommendations to support leadership decision-making.
• Experience with dashboard development, data visualization, and executive reporting is preferred.
• Utility industry experience is preferred.
• Experience working in regulated industries is preferred.

One Tech Engineering is searching for a Project Manager for a position located in St. Paul, Minnesota. The Project Manager will support the execution and delivery of the Inside Meter Move-Out (IMMO) Program.

The candidate must be a US citizen or hold a green card. The candidate should have 3+ years of project/program management experience.

• Coordinate activities across multiple departments and stakeholders to ensure program objectives are achieved.
• Track project progress, milestones, deliverables, and overall program performance.
• Collaborate closely with Scheduling, Design, Construction, and Gas Utilization teams.
• Monitor program financials, budgets, and key performance metrics.
• Maintain and update reports, dashboards, and program documentation.
• Prepare and deliver status reports and presentations to leadership.
• Follow up with stakeholders to obtain missing, incomplete, or delayed information.
• Ensure accurate and timely communication among project participants.
• Manage administrative tasks related to program execution and reporting.
• Identify and escalate risks, issues, and potential schedule impacts as needed.
  
  

• 3+ years of project/program management experience.
• Strong Excel and data analysis skills.
• Experience managing stakeholders and cross-functional teams.
• Excellent communication and organizational skills.
• SAP experience is preferred.
• Business Intelligence / dashboard experience is a plus.
• PMP certification is nice to have.

One Tech Engineering is searching for a Senior Civil Engineer for a position located in Kansas City, Missouri. The Senior Civil Engineer will lead civil design project teams to create world class designs for new projects, alterations and redevelopments on a variety of projects including datacenters, power, process, corporate, healthcare, pipeline, airports, institutional, industrial, manufacturing, government and military facilities.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Civil Engineering or related degree from an ABET accredited program and 7 years’ civil engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

Senior Civil Engineer Responsibilities:

• Review civil vendor drawings; data interface with suppliers, clients other engineering disciplines, detailers, designers.
• Participate in development of project schedule, scope, budget staffing planning and construction planning.
• Responsible for effective management of change orders.
• Applies expert knowledge of commonly used civil concepts, practices, codes and procedures within the civil engineering services industry.
• Compiles studies and reports.
• Applies knowledge and experience to complex projects, find's/develops non-standard design solutions.
• Quality review production drawings for a variety of projects and project related data as required by the project managers to verify design compliance with project, client, and industry standards, including constructability.
• Quality review the construction administration including coordination with field personnel to resolve design related installation issues, calculations, field inspections and testing of materials.
• Leads field inspections, installation, measurements or calculations for public and private clients.
• Prepare and present technical reports for clients and industry publications.
• Build effective relationships with existing clients, customers and contractors and develop new business opportunities.
• Responsible for ensuring customer satisfaction goals and expectations are met.
• Participate sales and marketing efforts and identify, lead and manage key pursuits.
• Lead the development of cost proposals and qualification statements to achieve stated targets and standards for financial performance.
• Prepare, present and manage project budgets and cost estimates.
• Report project performance.
• Provide leadership, guidance and instruction to the civil engineering practice.
• Mentor and guide less experienced engineers.
• Responsible for QA/QC process adherence.
• Responsible for effective communication with other engineering disciplines.
• Responsible for compliance with company and site safety policies.
• Performs other duties as assigned.
• Complies with all policies and standards.
  
  

• Bachelor’s Degree in Civil Engineering or related degree from an ABET accredited program and 7 years civil engineering experience.
• Or a Bachelor’s Degree in Civil or related Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam and 7 years civil engineering experience.
• Master’s Degree in Civil Engineering and 6 years civil engineering experience.
• EPC project experience preferred.
• Expert knowledge in standard engineering techniques and procedures.
• Strong computer skills (e.g. AutoCAD, MicroStation, BIM (Revit), Civil 3D, PLS, PLS-CADD, RISA-3D, MathCADD), and/or hydraulic, hydrologic, pavement, civil analysis programs.
• Excellent written and verbal communication skills.
• Experience with leading the discipline design for large projects and delegating work tasks to team members.
• Ability to lead execution of work and resolve issues in a team environment.
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Ability to perform quality reviews for detailed engineering documents and specifications.
• Ability to travel.
• Professional Engineer (PE) License is preferred.

One Tech Engineering is searching for a Substation Engineer for a position located in Cary, North Carolina. The Substation Engineer will work with the project team through the design and construction process, adapting engineering plans according to budget constraints, design factors, or client needs.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Electrical Engineering, Mechanical Engineering or related degree from an ABET accredited program and a minimum of 3 years of substation engineering experience, consulting preferred.

Local candidates preferred or open to relocation. This is not a remote position.

• Supports substation projects from the conceptual phase through completion.
• Prepares and develops substation design packages, including, but not limited to, physical arrangement above and below grade, protective relaying and control, electrical studies such as grounding and lightning analysis, and lighting and security.
• Develops substation calculations, including, but not limited to, insulation, AC station service, DC systems and battery sizing, voltage drop, cable sizing, and conduit fill.
• Prepares design sketches, cost estimates, equipment specifications, bill of materials, and other required deliverables.
• Applies intermediate knowledge of IEEE, NESC, and other industry and utility standards, guides, specifications and procedures.
• Supports field inspections for substation facilities on public and private utility systems.
• Researches and compiles project-related data as required by the project managers.
• Supports client presentations, reports, and visualizations to demonstrate technical results and project status.
• Identifies, communicates and supports the resolution of issues on projects as needed.
• Works with the project manager to support the project schedule and meet deadlines.
• Works closely with the project team to ensure deliverables and services are being provided to the client’s satisfaction and that projects are following internal QA/QC guidelines.
• Performs design quality reviews.
• Meets and corresponds with clients or outside personnel to develop relationships with key client points of contact.
• Supports the preparation of proposals and client presentations during the proposal process.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor’s Degree in Electrical Engineering, Mechanical Engineering or related degree from an ABET accredited program and a minimum of 3 years of substation engineering experience (consulting preferred).
• Or a Bachelor’s Degree in Electrical Engineering Technology, Mechanical Engineering Technology or related degree from an ABET accredited program and successful completion of the Fundamentals of Engineering (FE) exam, and a minimum of 3 years of substation engineering experience (consulting preferred). 
• Must have experience with physical design or protection and control (P&C) to take on key technical roles.
• Must have excellent written and verbal communication skills and strong analytical and problem- solving skills.
• Proficient computer skills (e.g. Microsoft Office Suite)
• Strong attention to detail and organizational skills.
• Demonstrated critical thinking skills.
• Desire to work in a collaborative team environment.
• Demonstrated leadership skills.
• Must be capable of applying diversified knowledge of engineering principles and practices to broad areas of assignments.
• Must be capable of devising new approaches to problems encountered.
• Engineers in Training-EIT Certification preferred.
• PE is preferred. 

One Tech Engineering is searching for an E &C Engineer for a position located in Mead, Colorado. The E&C Engineer will be overseeing and contributing to large-scale dispatchable projects such as combustion turbines.

The candidate must be a US citizen or hold a green card. The candidate should have a 9+ years of electrical engineering experience, including at least 3+ years in dispatchable generation projects (construction and/or engineering design).

• Provide electrical engineering expertise with a focus on reviewing project drawings and managing Requests for Information (RFIs) across multiple projects.
• Evaluate submittals, including drawings, studies, and technical analyses, to ensure alignment with project specifications and requirements.
• Identify and communicate variances to master specifications for internal engineering review and approval.
• Collaborate with engineers and project stakeholders to clearly define requirements and resolve technical questions.
• Support construction activities in the field by addressing electrical engineering questions, clarifying design intent, and troubleshooting on-site issues.
• Interpret engineering and construction drawings to ensure compliance with design intent and contract requirements.
• Manage RFIs and Non-Conformance Reports (NCRs), including resolution and documentation in coordination with project teams.
• Support both planning/review phases and active construction execution, providing technical guidance throughout the project lifecycle.

• 9+ years of electrical engineering experience, including at least 3+ years in dispatchable generation projects (construction and/or engineering design).
• Bachelor’s degree from an ABET-accredited institution or equivalent relevant experience.
• Prior experience working with utilities or design firms on dispatchable generation technologies, particularly large-frame combustion turbines.
• Strong written and verbal communication skills, along with strong analytical and problem-solving abilities.
• Familiarity with NCRs (Non-Conformance Reports), RFIs (Requests for Information), and managing contract scope.
• Knowledge of tools such as ProjectWise, Microsoft Office, Teams, Bluebeam, and Procore.
• SAP experience is a plus.
• Professional Engineer (PE) license preferred, or Engineer-in-Training (EIT) certification with intent to pursue PE licensure is preferred.

One Tech Engineering is searching for a Mechanical Engineer for a position located in Minneapolis, Minnesota or Sioux Falls, South Dakota. The Mechanical Engineer will support capital projects at wind farms across the region by managing a portfolio of approximately a dozen projects per year and overseeing the end-to-end project lifecycle at wind facilities.

The candidate must be a US citizen or hold a green card. The candidate should have a Bachelor’s degree in Engineering, and 3+ years of related experience.

Mechanical Engineer Responsibilities:  

• Plan and schedule capital projects at wind farms.
• Order equipment and manage contractors.
• Coordinate with site Operations & Maintenance teams.
• Perform limited R&D to select optimal equipment.
• Manage a multi‑year project portfolio with budgeting and forecasting.
• Ensure quality, schedule adherence, and cost control.
• Travel during construction windows to oversee installations.
  
  

• Bachelor’s degree in Engineering (Mechanical, Electrical, Civil, or a related field).
• 3–7 years of relevant experience.
• Previous project management experience.
• Prior experience in renewable energy, preferably wind, is preferred.
• Exposure to solar, hydro, or battery storage projects is a plus.
• Strong communication skills.
• PMP certification or PE license is preferred.

• Adhere to company’s safety programs, trainings, and policies, as well as promote and manage the Safety & Health performance of project team members and subcontractors.
• Responsible for the oversight of day-to-day construction activities and the successful execution of a single or multiple projects simultaneously.
• Provide direction and participate in project planning, scheduling, estimating, cost development, and establishing critical project objectives.
• Develop new and manage existing client relationships while interfacing with the client for proposal and project-related items.
• Participate in internal and external project risk reviews and consult with Legal Department as required.
• Negotiate prime contracts, CM contracts, subcontracts, and change orders.
• Participate in risk review process.
• Implement assigned sections of the Project Execution Plan, including construction execution, construction quality assurance plan, safety & health plan, subcontracting plan, project staffing plan, organization chart, and procurement plan.
• Develop construction staffing plans and train project teams, coordinate activities of multiple global practices/disciplines, and facilitate the efficient cost-effective utilization of staff while adhering to contractual and performance requirements.
• Oversee the development of the project plan for site layout, mobilization and demobilization and support implementation.
• Verify all applicable project permits are secured in accordance with the project requirements.
• Direct and oversee the downstream request for proposal (RFP) and bid process and prepare detailed scope of work documents for subcontractor and client contractor contracts, including bidder development, prequalification, evaluation, award recommendation, and selection.
• Review, approve, and communicate internal and external reports including project budgeting, project cash flow forecast, and project status reports. Present reports to Project Manager, Program Manager as well as internal and external executive management as required.
• Collaborate with engineering team to establish the development and distribution of engineering deliverables per project schedule and requirements.
• Develop processes and manage downstream contract administration including request for information (RFI’s), submittals, change management, contract closeout, documentation, and claims mitigation.
• Oversee Prime Contract, subcontractor, and client contractor invoicing process.
• Coordinate and facilitate client, supplier and company commissioning and startup teams as needed.
• Implement, audit, and oversee project documentation.
• Implement process for confirming project and subcontractor insurance, taxes/duties, licensures, and bonding requirements.
• Perform project safety, quality, progress and financial audits and assessments as required.
• Oversee and participate in the project-specific non-conformance reporting process.
• Responsible for facilitating project cost reporting, scheduling, work breakdown structure establishment, project set-up and closeout, and field progress tracking specific to construction and construction related activities or program level activities as required.
• Develop and oversee materials receiving and management process, including inventory control, receipt of goods, storage, and transportation as required.
• Review contract documents with field staff to verify compliance of subcontractors and client contractors, safety and health requirements, quality, and schedule.
• Direct the project turnover documentation, warranty administration, project closeout, and recordkeeping/retention processes and procedures.
• Support communication with governmental, industry, and public entities on project-related matters.
• Review construction field reports.
• Provide mentorship and training to interns, construction coordinators, craft supervision, and assistant construction project managers.
• Provide performance feedback for each project team member as requested to their respective Department Managers.
• Manage community and building trades relationships.
• Develop and implement project labor agreements with building trades as required.
• Onboard craft/field supervision as required.
• Manage composite crew rates to determine labor and equipment costs.
• Manage staffing on projects.
• Manage labor burdens including craft classifications, benefits and labor laws.
• Maintain accurate craft classifications and craft progression records.
• Uphold craft competency and training standards.
• Estimate, forecast and manage craft install unit rates.
• Manage earned value, schedule, change management and cost metrics.
• Mentor and foster craft training and identify advancement opportunities.
• Manage construction equipment to ensure adequate inventory to complete projects.
• May be assigned to a project site based on project requirements.
• Comply with company policies and procedures.
• Performs other duties as assigned.
  
  

• Bachelor’s Degree in Construction, Construction Management, Engineering, or a related field and 7 years of relevant project management experience in the construction industry.
• Applicable experience may be substituted for the degree requirement.
• Excellent computer skills and proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint and Access).
• Experience with document control, scheduling, cost control and project management software is preferred.
• Excellent written and verbal communication skills and strong organizational skills.
• Strong analytical and problem-solving skills, and attention to detail.
• Ability to handle large volumes of work and multi-task in a fast-paced environment.
• Multiple years of experience on construction project sites or executing program management in the industries of aviation, commercial, energy, government, manufacturing, oil & gas, process, transportation, transmission & distribution, or water is preferred.
• A basic understanding of Generally Accepted Accounting Principles is required.
• Must be able to meet the company's driving requirements.

One Tech Engineering is searching for a Project Controls Specialist for a position located in either Lexington or Louisville, Kentucky. The Project Controls Specialist will be responsible for leading the project controls processes with the internal project management team to execute project deliverables within budget and schedule.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in engineering, construction management or related field and 3 years of direct project controls experience required or applicable experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Analyze data, review logs, and run reports in the Enterprise Planning & Controls software or other tools.
• Create Work Breakdown Structure (WBS).
• Develop, implement, and maintain effective scheduling reports, cost reports, cash flows and forecasts for multiple projects.
• Follow project execution plans.
• Responsible for engineering, procurement and construction planning, scheduling, logistics and cost control.
• Serves as a point of contact for technical questions from the project team.
• Approve Purchase Orders and/or Subcontracts for proper coding.
• Input and document changes to cost reports or forecasts.
• Interfaces with the Project Management Team and Accounting Department to review project costs and contingency costs and support external audits.
• Review upstream (prime contract) and downstream (purchase order & subcontract) change orders.
• Develop and present a cash flow report.
• Develop various levels of schedules.
• Apply and review the entry of logic ties within the schedules.
• Monitor resource loading of a schedule.
• Support Interactive Project Planning Meetings (IPPM).
• Create various schedule reports and determine appropriate reporting format.
• Develop, review, and analyze pre-programmed project scheduling reports and back-up documentation for accuracy.
• Consults with the project team on schedule progress.
• Analyzes and evaluates schedule management involving the critical path method of scheduling techniques, estimating, project cost management and forecasting.
• Perform schedule what-if scenarios.
• Develop and maintain an earned value management system.
• Input and validate progress measurement.
• Develop and maintain progress curves.
• Perform material takeoffs.
• Perform quality checks and inspections on project controls deliverables.
• Perform field audits to validate accuracy of reporting and processes.
• Capable of assisting with Project Forensic Analysis.
• Performs other duties as assigned.
• Complies with all policies and standards.
  
  

• Bachelor’s Degree in engineering, construction management or related field and 3 years of direct project controls experience.
• Experience with Oracle Primavera P6 preferred.
• Excellent written and verbal communication skills.
• Excellent interpersonal skills.
• Proficient with Microsoft Office.
• OSHA 10-hour safety certification or ability to obtain.

• Develop and monitor project schedules, manage scope, and control project costs.
• Serve as the primary point of contact with clients regarding efforts such as client coordination, strategic planning, master scope management, budget finances, subcontracting, project staffing, environmental compliance, facility support and schedule attainment.
• Participate in and potentially lead internal and external project risk reviews.
• Consult with Legal Department as required.
• Manage internal project financials, providing detailed, accurate project cost forecasts and accruals to client(s) and Global Practice leadership.
• Establish project teams, coordinate activities of multiple disciplines, and ensure the efficient, cost-effective utilization of staff.
• Manage all aspects of project communication.
• Identify opportunities and manage team efforts for submittals, proposals, presentations, contract negotiation, and related activities.
• Leverage existing client relationships, create new client relationships and focus on client satisfaction.
• Provide mentorship as well as formal and informal training for the project team.
• Provide performance feedback for project team members as appropriate.
• Develop and implement project policies and procedures, establish project controls systems, and implement the project execution plan.
• Work closely with the project team to ensure deliverables and services are being provided to the client’s satisfaction and that projects are following internal QA/QC guidelines.
• Report regularly on progress, cost and schedule metrics, procurement issues, safety or environmental concerns, design questions, potential impacts, and any issues requiring additional support.
• All other duties as assigned.

• Bachelor's degree in engineering or a related field from an accredited program is required.
• Minimum of 7 years of related experience in design engineering, including 3 or more years of experience managing engineering projects.
• Completion of a master's degree in a related field may be substituted for one year of experience.
• Demonstrated success in project management.
• Proven ability to develop business and establish relationships with clients.
• Strong analytical and problem-solving skills.
• Must be capable of devising new approaches to problems encountered.
• Ability to handle large volumes of work and multitask in a fast-paced environment.
• Excellent written and verbal communication skills and strong interpersonal skills.
• Must have the ability to clearly and effectively present complex information to all levels of employees, management, and clients.
• Ability to influence, lead, and manage change thoughtfully and positively.
• Excellent computer skills and proficiency in Microsoft Office (Word, Excel, Outlook, and PowerPoint).
• Strong experience with document control, scheduling, cost control and project management software.
• Previous consulting experience preferred.
• Previous Transmission & Distribution experience preferred.
• P.E. & PMP preferred.

One Tech Engineering is searching for a Procore Implementation Specialist for a position located in Kansas City, Missouri. The Procore Implementation Specialist will provide development and deployment of advanced processes, tools, and technology to drive the efficient delivery of projects.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Engineering or related degree from an accredited program and 3 years of relevant experience, preferably in the consulting industry.

Local candidates preferred or open to relocation. This is not a remote position.

• Present proposed project execution solutions (including, software, hardware, code writing, automated processes etc.).
• Responsible for executing proof of concept activities including detailed savings, benefits and automated process improvements.
• Implement technology solutions to stakeholder successful adoption.
• Provide technology support to teams and processes to ensure optimal utilization.
• Evaluate existing processes and technology tools, and deploy new tools to improve efficiency and workflow improvements on client projects.
• Research and implement new technology and develop innovative approaches to our services and client deliverables.
• Attend tradeshows and conferences to present emerging trends, markets and technologies to leadership.
• Develop technologically innovative products, solutions, and services to create new revenue streams and improve project profit margins.
• Assist in the development of business cases for large investments and initiatives to enter into a partnership.  Assist in the presentation and launch of new venture through the companies launch program.
• Develop and maintain external vendor relationships and evaluate integration of their solution(s) into business processes.
• Collaborate with internal stakeholders, such as IT and Strategic Initiatives, to build wholistic and cohesive solutions for clients.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor’s Degree in Engineering or related degree from an accredited program and 3 years of relevant experience, preferably in the consulting industry.
• Or an Associate Degree and 5 years of relevant experience, preferably in the consulting industry.
• Or a High School Diploma/GED  and 7 years of relevant experience, preferably in the consulting industry.
• Minimum 1 year of Procore experience required.
• Strong knowledge and proficient in standard engineering techniques and procedures for project and program management.
• Excellent written and verbal communication skills.  Excellent presentation skills with internal and external audiences of various sizes.
• Strong computer skills, including Microsoft Office, CAD platforms, GIS, analysis programs, and data acquisition platforms.
• Strong knowledge in computer logic and data analytics preferred.
• Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.
• Strong attention to detail, facilitation, team building, collaboration, organization, and problem-solving skills.
• Demonstrated ability of advanced learning of new concepts and applying knowledge to deliverables.
• Engineers in Training (EIT) Certification preferred.

One Tech Engineering is searching for a Senior Civil Designer for a position located in Kansas City, Missouri. The Senior Civil Designer will lead various phases of planning, proposal preparation, site evaluations, analytical designs, report preparation, specifications, and preparation of construction documentation and environmental plans as part of a project team.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in drafting technology or a related field and 13 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Lead various civil project designs including site design, land development, roads, storm drainage systems, storm water management facilities, water and sanitary sewer utility design, sediment and erosion control, and traffic control, airports, and facility design.
  
• Lead drawing production work including problem analysis, design layout and calculations on non-routine assignments of substantial variety and complexity.
• Lead a variety of assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components and refining rough sketches.
• Lead the quality review of designs or sketches and mark-ups on ongoing projects.
• Present reports, maps, drawings, tests, and other topographical and geologic data to plan design projects.
• Interpret design codes and specifications related to design requirements.
• Lead design drawings within scope, budget and schedule.
• Quality review volume calculations for excavation, dredging, and upland site grading.
• Incorporate and approve schedules, budgets and project criteria into civil design and layouts for project financial goals.
• Organize and maintain all revisions of project drawings, plot files and project-related information in a logical and well-structured manner.
• Train, mentor, and develop staff members.
• Participate in marketing and client development meetings.
• Responsible for the civil design QA/QC process.

• Bachelor’s Degree in drafting technology or related field and 13 years related experience.
• Or an Associate’s Degree and 14 years of related experience.
• Or 15 years of progressive detailing and design experience. 
• Field experience is desirable.
• Advance understanding of design software such as: AutoCAD, Civil 3D, MicroStation, and Excel to develop the design deliverables. 
• Advance knowledge in design, calculations and design systems. 
• Advance knowledge in the theory and practices of civil discipline; competent in the fundamental concepts of other disciplines as they relate to the assigned discipline; and capable of operating related discipline design software necessary to execute production tasks. 
• Work collaboratively with others (Project Managers, Engineers and Designers) in a multi-discipline project team environment to resolve design or drawing issues as appropriate and to accomplish objectives. 
• Excellent written & verbal communication skills. 
• Excellent analytical and problem solving skills, and attention to detail.

One Tech Engineering is searching for a Project Manager for a position located in either St. Paul, Minnesota, or Denver, Colorado. The Project Manager will support the Gas Transmission Project Management team in managing projects from execution through closeout.

The candidate must be a US citizen or hold a green card. The candidate should have at least 5 years of relevant experience in the natural gas or utility industry (midstream, upstream, downstream, or public utility).

• Manage all phases of projects, including engineering, permitting, construction, and closeout.
• Oversee pipeline pressure test replacements, new pipeline builds, and service installations to neighborhoods and developers.
• Manage regulator (reg) station rebuilds and relocations due to road, infrastructure changes, or mandated requirements.
• Coordinate new business projects and mandated pipeline relocations.
• Oversee the RTU (Remote Terminal Unit) program, including prioritization, forecasting, contractor coordination, and execution.
• Develop, manage, and monitor project budgets, schedules, and forecasts.
• Ensure projects are executed safely, on time, and within budget.
• Serve as the primary point of contact for internal and external stakeholders throughout the project lifecycle.
• Identify and mitigate project risks, resolving issues to maintain project progress.
• Ensure compliance with all regulatory and company standards.

• Minimum of 5 years of relevant experience in the natural gas or utility industry (midstream, upstream, downstream, or public utility).
• Construction-based project management experience preferred.
• Engineering background preferred but not required.
• PMP (Project Management Professional) certification is a plus.
• Strong verbal and written communication skills.
• Advanced proficiency in Microsoft Excel.

One Tech Engineering is searching for an E&C Engineer for a position located in Minneapolis, Minnesota. The E&C Engineer will provide mechanical and electrical engineering support for natural gas and thermal power generation projects.

The candidate must be a US citizen or hold a green card. The candidate should have 8–10 years of experience, preferably with power plant design, construction, owner/operator, or EPC firms.

• Oversee power plant design, construction activities, and engineering deliverables.
• Review submittals, designs, and construction documentation to ensure compliance with project requirements and standards.
• Coordinate with internal engineering teams, contractors, and vendors to resolve technical issues.
• Support project planning, scheduling, and progress tracking to ensure timely completion of engineering tasks.
• Ensure adherence to safety, environmental, and quality standards throughout design and construction phases.
• Participate in design reviews, field inspections, and commissioning activities as needed.

• 8–10 years of experience, preferably in power plant design, construction, or with an owner/operator or EPC firm.
• Bachelor’s degree in Mechanical or Electrical Engineering (ABET-accredited).
• Experience in power generation, particularly combustion turbine plants.
• Professional Engineer (PE) license preferred, but not required.
• Familiarity with construction environments.
• Instrumentation and controls experience is a plus.
• Self-motivated and detail-oriented.