E&C Engineer

One Tech Engineering is searching for a Project Coordinator for a position located in Amarillo, Texas. The Project Coordinator will be supporting multiple large wind farm construction projects.

The candidate must be a US citizen or hold a green card. The candidate will have 3+ years of project experience in construction, industrial, or utility projects.

• Support project execution throughout the construction phase.
• Review drawings and participate in pre-construction design, planning, and coordination meetings.
• Coordinate with internal teams, including project managers, materials, and sourcing.
• Provide daily on-site oversight, monitor progress, and help resolve field issues.
• Coordinate with the project team and key stakeholders to ensure successful project execution.
  
  

• 3+ years of project experience in construction, industrial, or utility projects.
• Construction project experience required.
• Wind, turbine, or utility-scale project experience preferred.
• Strong communication, collaboration, and problem-solving skills.
• Engineering background preferred.
• PMP certification preferred, but not required.

One Tech Engineering is searching for a Distribution Designer Assistant for a position located in Kansas City, Missouri. The Distribution Designer Assistant will be responsible for designing and developing construction work packages for electric distribution projects, ensuring compliance with all applicable codes, standards, and client requirements.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a minimum of three years of experience in electric utility distribution design.

Local candidates preferred or open to relocation. This is not a remote position.

• Develop detailed design drawings, specifications, and material lists for overhead and underground electric distribution projects.
• Perform engineering calculations such as structural analysis of poles, conductor sizing, voltage drop, and transformer sizing.
• Ensure all designs adhere to client standards, industry best practices, and regulatory requirements including the National Electrical Safety Code (NESC).
• Collaborate with project managers, engineers, and other stakeholders to meet project objectives and deadlines.
• Prepare and submit permit applications to various agencies.
• Process information collected during site visits to gather information and verify field conditions to be used for design activities.
• Provide technical support during the construction phase, addressing any design-related issues that may arise.
• Work on multiple projects simultaneously, from initial assignment to completion.

• An associate's or Bachelor's degree in engineering technology, drafting, or a related field is required.
• A minimum of three years of experience in electric utility distribution design.
• Must have distribution experience.
• Proficiency in computer-aided design (CAD) software, GIS software, and other design tools.
• Strong knowledge of electric distribution infrastructure and construction techniques.
• Familiarity with NESC and other relevant industry standards.
• Excellent written and verbal communication skills.
• Ability to work effectively in both a team environment and independently.

One Tech Engineering is searching for an Electrical Detailer Assistant for a position located in La Jolla, or Brea, California. The Electrical Detailer Assistant will support electrical substation design projects for various utility clients.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in drafting technology or related field and 2 years hands-on experience in electrical utility design, specifically related to electrical substation systems.

Local candidates preferred or open to relocation. This is not a remote position.

Electrical Detailer Assistant Responsibilities:

• Providing high-quality drafting and detailing support for electrical substation systems within the electric utility industry.
• Responsible for preparing and modifying detailed design drawings, layouts, and construction documents in accordance with client standards, project specifications, and industry regulations.

• Bachelor’s Degree in drafting technology or related field and 2 years hands-on experience in electrical utility design, specifically related to electrical substation systems.
• Or an Associate Degree and 3 years hands-on experience in electrical utility design, specifically related to electrical substation systems.
• Or a High School Diploma/GED and mins 4 years hands-on experience in electrical utility design, specifically related to electrical substation systems.
• Proficiency in AutoCAD and MicroStation.
• Experience producing accurate, detailed drawings for substation equipment, layouts, grounding, conduit, and electrical plans.
• Strong understanding of utility standards, drafting best practices, and quality control procedures.
• Experience with 3D design tools such as Revit, AutoCAD Electrical, Inventor, and/or Civil 3D is a plus.

One Tech Engineering is searching for Electrical Designer Assistant for a position located in Dallas, Texas. The Electrical Designer Assistant will assist in various phases of planning, site evaluations, analytical designs, report preparation, specifications, and preparation of proposal and construction documentation and electrical plans as part of a project team.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in drafting technology or a related field and 2 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

Electrical Designer Assistant Responsibilities:

• Assist in designing various electrical project designs, including creating electrical schematics, grid plan layouts, electrical power systems, lighting systems, protection and controls, and site and facility design.
• Follow all company, client, and project design and drafting standards.
• Assist with the setup of electrical CAD configuration and procedures according to project requirements at the beginning of a project for the electrical design team.
• Assist in preparing engineering drawings from rough sketches or from general engineering and design information (verbal instructions and notes) using CAD software programs.
• Assist with a full range of drawing production work, including problem analysis, design layout, and calculations on non-routine assignments of substantial variety and complexity.
• Assist with a variety of assignments using prescribed methods and standard techniques, including drawing sequence and presentation, sizing various system components, and refining rough sketches.
• Assist with initial rough designs or sketches and redlines or mark-ups on ongoing projects.
• Assist with analyzing reports, drawings, and tests to plan and design projects.
• Apply design codes and specifications related to design requirements.
• Complete and review design drawings within scope, budget, and schedule.
• Perform project tasks and assignments within budgeted hours and deadlines.
• Incorporate schedules, budgets, and project criteria into electrical design and layouts.
• Organize and maintain all revisions of project drawings, plot files, and project-related information in a logical and well-structured manner.
• Performs other duties as assigned
• Complies with all policies and standards.
  
  

• Bachelor’s Degree in drafting technology or related field and 2 years of related experience.
• Or an Associate Degree and 3 years of related experience.
• Or 4 years of progressive detailing and design experience.
• Strong understanding of design software such as: AutoCAD, MicroStation, and Excel to develop the design deliverables.
• Ability to learn and effectively utilize new design software programs.
• Experience with REVIT, Bluebeam Revu, and other Autodesk applications is preferred.
• Ability to utilize both 2D and 3D applications to prepare engineering drawings.
• Basic knowledge in design, calculations and design systems.
• Basic knowledge in the theory and practices of the engineering discipline; competent in the fundamental concepts of other disciplines as they relate to the assigned discipline; and capable of operating related discipline design software necessary to execute production tasks.
• Ability to work collaboratively with others (Project Managers, Engineers and Designers) in a multi-disciplinary project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
• Excellent written & verbal communication skills.
• Strong analytical and problem-solving skills, and attention to detail.

One Tech Engineering is searching for an Electrical Construction Supervisor for a position located near Earth, Texas. The Electrical Construction Supervisor will oversee and inspect EPC contractor work to ensure compliance with drawings, specifications, and contract requirements.

The candidate must be a US citizen or hold a green card. The candidate should have 7–10 years of experience in Electrical Construction oversight.

• Oversight of electrical construction activities.
• Perform quality inspections using ArcGIS / Survey123 and inspection templates.
• Verify EPC contractor work meets contract and design requirements.
• Document inspection results and findings in the company systems.
• Participate in daily Plan of the Day (POD) meetings.
• Coordinate inspection readiness with EPC contractor.
  
  

• 7–10 years of experience in Electrical Construction oversight.
• Strong background in quality control inspections.
• Power plant experience (gas, coal, or similar) strongly preferred.
• Combustion turbine experience a plus, but not required.
• Experience with ArcGIS, Survey123, or Procore preferred.
• Valid driver’s license and ability to pass a criminal background check.

One Tech Engineering is searching for a Structural Engineer for a position located in Eau Claire, Wisconsin. The Structural Engineer will support multi-year hydroelectric facility projects, including dam reconstruction and upgrades.

The candidate must be a US citizen or hold a green card. The candidate should have 5–7 years of structural engineering experience.

• Lead and oversee heavy structural steel and reinforced concrete work, including staged in-water installations.
• Coordinate with and ensure compliance on projects regulated by the Federal Energy Regulatory Commission (FERC).
• Serve as the on-site technical liaison, resolving field issues and ensuring construction quality and adherence to design specifications.

• Bachelor’s degree in Structural Engineering or related field.
• 5–7 years of structural engineering experience.
• Strong experience in heavy structural engineering, including concrete and steel design and construction.
• Proficient in Microsoft Office, with extensive experience using SharePoint.
• Ability to open and review native CAD files (MicroStation preferred).
• Valid driver’s license and reliable transportation.
• Previous experience working with hydroelectric facilities, dams, or in-water construction projects.
• Experience with FERC-regulated projects preferred.
• Professional Engineer (PE) or Engineer-in-Training (FE) certification is a plus.

One Tech Engineering is searching for Marketing Analyst for a position located in Denver, Colorado or Minneapolis, Minnesota. The Marketing Analyst will support commercial Demand-Side Management (DSM) programs, ensuring alignment with regulatory and program requirements.

The candidate must be a US citizen or hold a green card. The candidate should have a Bachelor’s degree in Marketing, Business Administration, Communications, or a related field.

• Update and maintain marketing materials, including program collateral, promotional content, and customer communications.
• Review rebate applications for accuracy and completeness before submitting them to the rebate processing team.
• Manage multiple program inboxes, responding to inquiries and coordinating communication with internal teams and external stakeholders.
• Collaborate with cross-functional teams to support program execution and ensure the timely completion of marketing and operational tasks.
• Monitor program workflows and assist in identifying opportunities to improve processes and enhance program effectiveness.

• Bachelor’s degree in Marketing, Business Administration, Communications, or a related field.
• Previous experience in a regulated industry or in a customer service-focused role; utility industry experience is preferred.
• Proficiency in Microsoft Office Suite, including Excel, Word, PowerPoint, and Outlook.
• Experience with Salesforce is preferred.
• Strong written and verbal communication skills.
• Strong organizational skills.
• Detail-oriented with strong analytical and problem-solving abilities.

One Tech Engineering is searching for a GIS Analyst for a position located in Denver, Colorado; Minneapolis, Minnesota; and Eau Claire, Wisconsin. The GIS Analyst will support day-to-day GIS team operations, including data extraction, regulatory data requests, and creating interactive maps using Esri products.

The candidate must be a US citizen or hold a green card. The candidate should have 3-7 years of related GIS, Geography, or Geospatial experience.

• Perform data analysis using tools such as Databricks.
• Complete and prioritize tasks through JIRA.
• Handle work ranging from simple data requests to multi-day analysis and mapping projects.
• Perform data extraction and support more complex analysis and mapping tasks.
  
  

• Bachelor’s degree in Geography, GIS, or a related field.
• 3–7 years of experience in GIS, Geography, or geospatial analysis.
• Utility industry experience (gas or electric) is highly desirable.
• Proficiency with Esri / ArcGIS and Python.
• Experience with data extraction, reporting, analysis, and Databricks.
• Strong problem-solving skills.
• Prior experience using GE Smallworld, MAGIC, and SAP is nice to have.

One Tech Engineering is searching for a Project Controls Specialist for a position located in Kansas City, Missouri. The Project Controls Specialist will lead the project controls efforts and is responsible for the daily management of the project controls tasks.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in engineering, construction management or related field and 3 years of direct project controls experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Support the implementation and maintenance of the program reporting data warehouse and produce client facing program controls reports and data.
• Support clients in configuring program functions in the planning & controls software.
• Support program management through critical path scheduling, estimating, project cost management, forecasting, document control, and reporting across a program.
• Perform quality review and implementation of program execution manuals.
• Support quality review of Earned Value Management system reporting.
• Perform quality review, input and document changes and present cost management and forecast reports to program stakeholders.
• Input data to, document changes of, perform quality reviews of, and present cost management reports to program stakeholders.
• Develop and present a cash flow reports to program stakeholders.
• Analyze data, review logs, and run reports in the planning & controls software.
• Create Work Breakdown Structure (WBS), develop various levels of schedules, apply logic ties within the schedules, and perform schedule what-if scenarios to identify and proactively monitor progress risks.
• Develop and execute, review, and analyze pre-programmed program scheduling reports and supporting documentation for accuracy.
• Monitor resource loading of a schedule.
• Input and validate progress measurement and maintaining progress curves.
• Perform field audits to validate accuracy of reporting and processes.
• Support implementation and risk management processes by identifying and mitigating risk potentials to the project.
• Support the Interactive Program Planning Meetings (IPPM).
• Analyze forecasted program costs including performance against an established schedule with critical milestones.
• Serve as a point of contact for technical project controls questions from the program team.
• Assist senior controls personnel with updates to internally facing financial systems.
• Assist in communicating the impact of changes to internal financials as directed.
• Maintain effective relationships with existing and potential clients, customers and contractors.
• Performs other duties as assigned.
• Complies with all policies and standards. 

• Bachelor’s Degree in engineering, construction management or related field and 3 years of direct project controls experience.
• Applicable experience may be substituted for the degree requirement.  
• Experience with Oracle Primavera P6 preferred. 
• Excellent written and verbal communication skills. 
• Excellent interpersonal skills. 
• Proficient with Microsoft Office.  
• OSHA 10-hour safety certification or the ability to obtain.

One Tech Engineering is searching for an Instructional Designer for a position located in Amarillo, Texas. The Instructional Designer will be responsible for in-person delivery of the existing transmission substation training curriculum.

The candidate must be a US citizen or hold a green card. The candidate should have Journeyman Substation Electrician experience.

• Deliver engaging, classroom-based instruction for substation training programs.
• Facilitate multi-week training sessions for substation personnel.
• Review and prepare instructional materials in advance of training sessions.
• Collaborate with subject matter experts to ensure content accuracy and relevance.
• Support minor revisions, updates, and continuous improvement of the curriculum.
• Coordinate logistics and training preparation activities.
• Occasionally visit substations or training labs to provide hands-on instructional support.
  
  

• Journeyman Substation Electrician experience is required.
• Minimum of 4–5 years of hands-on substation experience.
• Extensive field experience in substation operations or maintenance.
• Strong working knowledge of substation equipment, including breakers, relays, and mechanical/electrical systems.
• Prior teaching, training, or mentoring experience.
• Excellent verbal communication and presentation skills.
• Proficiency with Microsoft Office (Outlook, PowerPoint, and basic Excel skills).