Construction Supervisor

One Tech Engineering is searching for a Payroll Specialist for a position located in Appleton, Wisconsin. The Payroll Specialist will be responsible for processing union payroll, reports, and government taxes.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a High School Diploma/GED and at least 3 years of payroll experience.

Local candidates preferred or open to relocation. This is not a remote position.

Payroll Specialist Responsibilities:

• Coordinate with field management staff to collect union new hire paperwork.
• Ensure information is complete and accurate, following up on any issues or missing information.
• Create union employee record in ERP system, updating employment data or status changes.
• Ensure severance, termination, and disciplinary forms are reflected appropriately.
• Using reports, review field time entry for potential errors in hours, union, pay class, and per diem.
• Follow up with site teams and address as appropriate prior to payroll processing.
• Process weekly union payroll and off-cycle checks in a timely manner by importing time details and validating entries created.
• Confirm calculation of earnings, deductions, garnishments, union liabilities, and taxes.
• Ensure paychecks are distributed on time.
• Prepare monthly union remittances.
• Using system reports, calculate amounts and submit payment requests, ensuring reconciliation between liabilities accrued and payments.
• Match payments with labor details and remit to appropriate funds.
• Prepare reports, check for accuracy, and resolve discrepancies as part of business recordkeeping and compliance activities.
• Respond to and resolve inquiries related to union employee payroll.
• Submit new hire reports to state agencies
• Process child support and other court orders as necessary.

• High School Diploma/GED and at least 3 years of payroll experience.
• Union construction payroll experience is preferred.
• Experience processing construction payroll preferred.
• Experience with Oracle or other large software vendors preferred.
• Must have excellent organizational skills, problem-solving skills, and attention to detail.
• Strong verbal and written communication skills.
• Proficient in Microsoft Office Suite.
• Ability to use Excel to manipulate and analyze data.

One Tech Engineering is searching for a Project Assistant for a position located in Akron, Ohio. The Project Assistant will work with SCADA engineering teams to ensure successful project execution.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a High School Degree and 3 years relevant experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Verify project scope, work orders, change tickets, and RTU outage requests prior to SCADA testing and commissioning.
• Identify, communicate, and resolve project issues as they arise.
• Attend weekly meetings with the client and provide necessary information as requested.
• Verify SCADA configurations are ready before the field project date.
• Confirm EMS upload dates occur before the field project date.
• Coordinate with EMS testers to assign testers for each SCADA job.
• Provide regular project updates and maintain accurate job completion status for each job.
• Schedule field technicians to capture as-found configurations when requested by the engineering department.
• Verify all contracted SCADA jobs for the upcoming week with the Project Manager and field personnel.
• Request site access for contracted SCADA techs.
• Assist the field tech finding the correct U-drive folder for SCADA jobs.
• Edit and create documents for Technician Project Reports based on technician feedback.
• Assist technicians with paperwork and answer any questions.
• Verify and record the submission and accuracy of project reports using an Excel spreadsheet.

• High School Degree and 3 years of relevant experience.
• Or an Associate’s and 2 years relevant experience.
• Or a Bachelor’s and relevant experience.
• Proficient in Microsoft Word, Excel, Access, and PowerPoint required. 
• Power BI experience is a plus.

One Tech Engineering is searching for a Civil Designer Assistant for a position located in Kansas City, Missouri. The Civil Designer Assistant will assist in various phases of planning, proposal preparation, site evaluations, analytical designs, report preparation, specifications, and preparation of construction documentation and environmental plans as part of a project team.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in drafting technology or a related field and 2 years of related experience.

• Assist in designing various civil projects including site design, land development, roads, storm drainage systems, storm water management facilities, water and sanitary sewer utility design, sediment and erosion control, and traffic control, airports, and facility design.
• Assist with a full range of drawing production work including problem analysis, design layout and calculations on non-routine assignments of substantial variety and complexity.
• Assist with a variety of civil assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components and refining rough sketches.
• Assist with initial rough designs or sketches and mark-ups on ongoing projects.
• Assist with analyzing reports, maps, drawings, tests, and other topographical and geologic data to plan and design projects.
• Interpret and apply design codes and specifications related to design requirements.
• Complete and review design drawings within scope, budget and schedule.
• Compute volume calculations for excavation, dredging, and upland site grading.
• Incorporate schedules, budgets and project criteria into civil design and layouts.
• Organize and maintain all revisions of project drawings, plot files and project-related information in a logical and well-structured manner.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor’s Degree in drafting technology or related field and 2 years of related experience.
• Or an Associate Degree and 3 years of related experience.
• Or 4 years of progressive detailing and design experience.
• Basic understanding of design software such as: AutoCAD, Civil 3D, MicroStation, and Excel to develop the design deliverables.
• Basic knowledge in design, calculations and design systems.
• Basic knowledge in the theory and practices of civil discipline; competent in the fundamental concepts of other disciplines as they relate to the assigned discipline; and capable of operating related discipline design software necessary to execute production tasks.
• Ability to work collaboratively with others (Project Managers, Engineers and Designers) in a multi-discipline project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
• Excellent written & verbal communication skills.
• Strong analytical and problem solving skills, and attention to detail.

One Tech Engineering is searching for Electrical Detailer Assistant for a position located in Kansas City, Missouri. The Electrical Detailer Assistant will assist in the production of engineering drawings and project deliverables for utility and infrastructure projects.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in drafting technology or related field and 2 years related experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Assist in the preparation of engineering drawings using AutoCAD and Civil 3D.
• Produce accurate plans, profiles, details, and construction drawings from engineering markups, sketches, and verbal direction.
• Assist in developing overhead (OH) and underground (UG) utility plans and profiles.
• Prepare and revise drawing packages for permitting and project submittals.
• Clean up, organize, and maintain CAD files while ensuring compliance with company and client drafting standards.
• Maintain organized project files and drawing documentation.
• Produce project deliverables efficiently while meeting project schedules and quality expectations.
• Assist in QA/QC process and implement revisions to improve drawing accuracy and consistency.
• Communicate effectively with engineers and project team members regarding drawing revisions, priorities, and workload.
• Maintain proficiency with current CAD software and drafting standards while learning utility design practices and company workflows.

• Bachelor’s Degree in drafting technology or related field and 2 years related experience.
• Or an Associate Degree and 3 years related experience.
• Or High School Diploma/GED  and 4 years progressive detailing and design experience.  
• Strong foundation in drafting principles and practices.
• Proficiency with CAD software and drafting tools.
• Willingness and ability to learn utility design standards and practices.

One Tech Engineering is searching for a Project Controls Specialist for a position located in Brentwood, Tennessee. The Project Controls Specialist will be responsible for leading the project controls processes with the internal project management team to execute project deliverables within budget and schedule.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in engineering, construction management, or a related field, and 3 years of direct project controls experience required or applicable experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Analyze data, review logs, and run reports in the Enterprise Planning & Controls software or other tools.
• Create Work Breakdown Structure (WBS).
• Develop, implement, and maintain effective scheduling reports, cost reports, cash flows and forecasts for multiple projects.
• Follow project execution plans.
• Responsible for engineering, procurement and construction planning, scheduling, logistics and cost control.
• Serves as a point of contact for technical questions from the project team.
• Approve Purchase Orders and/or Subcontracts for proper coding.
• Input and document changes to cost reports or forecasts.
• Interfaces with the Project Management Team and Accounting Department to review project costs and contingency costs and support external audits.
• Review upstream (prime contract) and downstream (purchase order & subcontract) change orders.
• Develop and present a cash flow report.
• Develop various levels of schedules.
• Apply and review the entry of logic ties within the schedules.
• Monitor resource loading of a schedule.
• Support Interactive Project Planning Meetings (IPPM).
• Create various schedule reports and determine appropriate reporting format.
• Develop, review, and analyze pre-programmed project scheduling reports and back-up documentation for accuracy.
• Consults with the project team on schedule progress.
• Analyzes and evaluates schedule management involving the critical path method of scheduling techniques, estimating, project cost management and forecasting.
• Perform schedule what-if scenarios.
• Develop and maintain an earned value management system.
• Input and validate progress measurement.
• Develop and maintain progress curves.
• Perform material takeoffs.
• Perform quality checks and inspections on project controls deliverables.
• Perform field audits to validate accuracy of reporting and processes.
• Capable of assisting with Project Forensic Analysis.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor’s Degree in engineering, construction management or related field and 3 years of direct project controls experience.
• Experience with Oracle Primavera P6 preferred.
• Excellent written and verbal communication skills.
• Excellent interpersonal skills.
• Proficient with Microsoft Office.
• OSHA 10-hour safety certification or ability to obtain.

One Tech Engineering is searching for a Substation Construction Manager for a position located in Hamburg, Arkansas; Shawboro, North Carolina; and Jackson, Ohio. The Substation Construction Manager will be responsible for overseeing and directing all on-site construction activities for electrical substation projects.


The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have 8+ years of experience in electrical substation construction or T&D projects.

• Lead day-to-day field construction activities for substation projects (greenfield, brownfield, expansions, upgrades).
• Supervise site superintendents, foremen, subcontractors, and craft labor.
• Develop and execute construction work plans, sequencing, and manpower plans.
• Coordinate outage schedules and tie-ins with utilities and system operators.
• Champion a zero-incident safety culture across all project sites.
• Enforce site-specific safety plans, JHAs, and company safety policies.
• Ensure compliance with OSHA, NESC, NFPA 70E, and utility safety standards.
• Conduct toolbox talks, safety audits, and incident investigations.
• Drive adherence to the project schedule and milestone dates.
• Monitor labor productivity, equipment utilization, and material availability.
• Identify and mitigate construction risks and schedule impacts.
• Ensure construction meets approved drawings, specifications, and standards.
• Coordinate inspections, testing, and quality documentation.
• Resolve field conflicts, constructability issues, and non-conformances.
• Interface with engineering teams on constructability reviews and RFIs.
• Coordinate material deliveries (transformers, breakers, steel, control buildings).
• Support commissioning, testing, and energization activities.
• Serve as the primary on-site representative for clients and utility personnel.
• Participate in progress meetings and provide field updates.
• Coordinate with AHJs, inspectors, and third-party owners’ engineers.
• Track field costs, labor hours, and equipment usage.
• Support change management, time-and-material work, and daily reports.
• Assist with punch list completion and project closeout.

• 8+ years of experience in electrical substation construction or T&D projects.
• Strong hands-on knowledge of substation construction means and methods.
• Proven leadership experience managing field crews and subcontractors.
• In-depth knowledge of electrical safety practices and energized work environments.
• Ability to read and interpret construction drawings and specifications.
• Willingness to travel extensively and work from project sites.
• Experience with utility-scale or EPC substation projects is preferred.
• Experience with high-voltage systems (69kV–500kV) is preferred.
• Electrical trade background or construction management degree is a nice-to-have.
• Familiarity with relay testing, protection & control, and commissioning processes is a nice-to-have.

One Tech Engineering is looking for an Electrical Designer for a position located in Wausau, Wisconsin. The Electrical Designer will create and maintain schematics, wiring diagrams, layout drawings and parts lists used for the manufacture and installation of equipment.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have an Associate's degree and 2+ years of related experience.

Local candidates preferred. This is not a remote position.

• Create detailed and assembly drawings of design components and circuitry using computer-aided design (CAD) software and standard drafting techniques.
• Select and design parts to meet functional, cost and delivery requirements, and create lists of parts used for the procurement, manufacturing and installation of equipment.
• Consult with engineers to discuss and interpret design concepts and determine requirements of detailed working drawings.
• Understand manufacturing and installation processes and what is required on detail and assembly drawings to accomplish them.
• Read and understand schematics and drawings of mechanical systems.
• Maintain parts database and drawing libraries.
• Review work performed by his/her peers for correctness.
• Perform equipment sizing and design calculations.
  
  

• Associate’s degree (two year college or technical school).
• 2 - 4 years of related experience.
• Computer Skills including EPLAN, Autodesk AutoCAD Electrical, and Microsoft Office.
• Knowledge of NEC & UL 508A requirements.

One Tech Engineering is looking for a Mechanical Engineer for a position located in Wausau, Wisconsin. The Mechanical Engineer will design and implement mechanical and hydraulic systems for industrial and electrical generation facilities along with generating all design work associated with assigned projects, including design reports, documentation, and programming.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s degree in mechanical engineering or a technical degree plus 5 years of related experience.

Local candidates preferred. This is not a remote position.

• Commissioning of mechanical and hydraulic systems.
• Design and implement mechanical and hydraulic systems. 
• Design hydraulic schematic diagrams.
• Design, develop, test, and start-up projects as requested.
• Interpret mechanical drawings.
• Perform demolition and installation engineering.
• Perform design reviews.
• Perform FAT, installation supervision, SAT, customer training, and system commissioning as requested.
• Perform hydraulic calculations for system sizing and component selection.
• Perform mechanical calculations for system sizing and component selection.
• Perform Mechanical Design.
• Perform onsite inspections and project “kick-off” meetings as assigned.
• Perform peer reviews.
• Prepare O&M manual, factory acceptance test (FAT), installation, site acceptance test (SAT), and customer training documents.
• Provide installation conceptual system engineering.
• Provide static and dynamic calculations.
• Design machines, brackets, supports, and piping for a variety of new and existing equipment.
• Support Engineering division as requested.
• Utilize electrical and hydraulic test equipment.
• Work effectively with all other project team members such as control, electrical, HMI, and mechanical disciplines.
• Work with mechanical designers to develop mechanical and hydraulic drawings.

• Bachelor’s degree in mechanical engineering or a technical degree plus 5 years of related experience.
• Experience with hydraulic systems, including hydraulic power units, hydraulic control manifolds, and hydraulic cylinders.
• Strong conceptualization ability along with strong interpersonal, communication, and organizational skills, including the ability to explain complex technical issues to decision-makers and project teams.
• Experience with Autodesk Inventor.
• USA or Canadian Professional engineering registration or the ability to become registered.
• Ability to travel more than 30% domestically and internationally.

One Tech Engineering is looking for a Controls Engineer for a position located in Wausau, Wisconsin. The Controls Engineer will design and implement PLC control and protection systems for industrial and electrical generation facilities.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s degree in electrical engineering or a technical degree plus 3 years of related experience.

Local candidates preferred. This is not a remote position.

• Commissioning of electrical, automation, and hydraulic systems.
• Program and Troubleshoot PLC-based control systems.
• Program and Troubleshoot HMI and Operator Interfaces.
• Design electrical schematic diagrams, external electrical wiring diagrams, field instrumentation systems, internal panel wiring drawings, and PLC drawings.
• Design, develop, test, and start-up projects as requested.
• Ensure effective information handoffs.
• Interpret electrical drawings.
• Interpret mechanical drawings.
• Perform onsite inspections and project “kick-off” meetings as assigned.
• Perform peer reviews.
• Perform electrical calculations for system sizing and component selection.
• Perform FAT, installation supervision, SAT, customer training, and system commissioning as requested.
• Prepare O&M manual, factory acceptance test (FAT), installation, site acceptance test (SAT), and customer training documents.
• Support Engineering division as requested.
• Utilize electrical and hydraulic test equipment.
• Work effectively with all other project team members such as control, electrical, HMI, and mechanical disciplines.
• Work with designers to develop drawings.
  
  

• Bachelor’s degree in electrical engineering or a technical degree plus 3 years of related experience.
• Prior experience in PLC and HMI programming.
• Ability to travel more than 30% domestically and internationally.
• Familiarity with power generation equipment, turbine governors, or excitation systems
• Strong conceptualization ability along with strong interpersonal, communication, and organizational skills, including the ability to explain complex technical issues to decision-makers and project teams.
• Experience with AutoCAD, or EPlan.
• USA or Canadian Professional engineering registration or the ability to become registered.

One Tech Engineering is looking for a Mechanical Designer for a position located in Wausau, Wisconsin. The Mechanical Designer will create detailed and assembly drawings of design components and assemblies using computer-aided design (CAD) software and standard drafting techniques.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have an Associate’s degree (two-year college or technical school).

Local candidates preferred. This is not a remote position.

• Select and design parts to meet functional, cost and delivery requirements, and create parts lists used for the procurement, manufacturing and installation of equipment.
• Consult with engineers to discuss and interpret design concepts, and determine requirements of detailed drawings.
• Understand manufacturing and installation processes and what is required on detail and assembly drawings to accomplish them.
• Read and understand schematics and drawings of electrical systems.
• Maintain parts database and drawing libraries.
• Review work performed by his or her peers for correctness.
  
  

• Associate’s degree (two-year college or technical school).
• Computer Skills including Autodesk Mechanical Desktop, Autodesk Inventor, Infor, Microsoft Office
• Knowledge of Geometric Tolerancing, Welding Practices and Symbols and Hydraulic Circuits and Symbols
• Must be willing to work overtime, weekdays, and weekends to meet customer service requirements.

One Tech Engineering is looking for a Substation Technician for a position located near Oshkosh, Wisconsin. The Substation Technician will service and test transformers, relays, breakers, switches, and other electrical apparatus/systems at utility substations and industrial facilities.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have an Associate’s degree in Electrical Power or Electrical Engineering, or 5+ years of hands-on field experience.

Local candidates preferred. This is not a remote position.

• Ground grid testing, medium voltage cable testing.
• Troubleshoot and test control circuits, communications systems, protections systems and other electrical apparatus.
• Perform breaker and relay retrofits.
• Ability to read prints and control/protection schemes.
• Complete and submit reports accurately and timely.
• All other duties as assigned by management.
• Applying test procedures for various types of relay test equipment.
• Substation awareness and Safety consciousness.
• Aptitude to quickly learn and apply test procedures for various types of substation equipment.
• Performs testing on low and medium voltage breakers including Megger, Ductor, Hi-Pot, Hi-Current, and Timing tests. 
• Testing on power transformers including Power Factor, TTR, Insulation Resistance, Winding Resistance.
• Completes mechanical work and repairs on breakers including wiring, painting, parts replacement.
• Utilizes and accurately reads meters. 
• Reading and plotting curves.

• Associate’s degree in Electrical Power or Electrical Engineering, or 5+ years of hands-on field experience.
• Experience as a Switchgear/High Voltage Technician.
• Proficiency with high voltage test equipment as well as knowledge of low and medium voltage test equipment.
• Proficient computer and phone skills, including Microsoft Office Suite (Word, Excel, Outlook).
• Ability to work a flexible schedule based on client/customer needs.
• Valid driver’s license.
• Effective communication skills.
• Extensive travel; up to 5 days/week with overnights possible.
• On call duty is required approximately six times per year.
• This position is very active and requires standing, walking, bending, stooping, crouching, climbing, crawling, and reaching frequently.
• Aerial work may sometimes be necessary, such as working on ladders or scaffolding.

One Tech Engineering is looking for a Substation Technician for a position located near Neenah, Wisconsin. The Substation Technician will service and test transformers, relays, breakers, switches, and other electrical apparatus/systems at utility substations and industrial facilities.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have an Associate’s degree in Electrical Power or Electrical Engineering, or 5+ years of hands-on field experience.

Local candidates preferred. This is not a remote position.

• Ground grid testing, medium voltage cable testing.
• Troubleshoot and test control circuits, communications systems, protections systems and other electrical apparatus.
• Perform breaker and relay retrofits.
• Ability to read prints and control/protection schemes.
• Complete and submit reports accurately and timely.
• All other duties as assigned by management.
• Applying test procedures for various types of relay test equipment.
• Substation awareness and Safety consciousness.
• Aptitude to quickly learn and apply test procedures for various types of substation equipment.
• Performs testing on low and medium voltage breakers including Megger, Ductor, Hi-Pot, Hi-Current, and Timing tests. 
• Testing on power transformers including Power Factor, TTR, Insulation Resistance, Winding Resistance.
• Completes mechanical work and repairs on breakers including wiring, painting, parts replacement.
• Utilizes and accurately reads meters. 
• Reading and plotting curves.

• Associate’s degree in Electrical Power or Electrical Engineering, or 5+ years of hands-on field experience.
• Experience as a Switchgear/High Voltage Technician.
• Proficiency with high voltage test equipment as well as knowledge of low and medium voltage test equipment.
• Proficient computer and phone skills, including Microsoft Office Suite (Word, Excel, Outlook).
• Ability to work a flexible schedule based on client/customer needs.
• Valid driver’s license.
• Effective communication skills.
• Extensive travel; up to 5 days/week with overnights possible.
• On call duty is required approximately six times per year.
• This position is very active and requires standing, walking, bending, stooping, crouching, climbing, crawling, and reaching frequently.
• Aerial work may sometimes be necessary, such as working on ladders or scaffolding.

One Tech Engineering is looking for a Substation Technician for a position located near Appleton, Wisconsin. The Substation Technician will service and test transformers, relays, breakers, switches, and other electrical apparatus/systems at utility substations and industrial facilities.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have an Associate’s degree in Electrical Power or Electrical Engineering, or 5+ years of hands-on field experience.

Local candidates preferred. This is not a remote position.

• Ground grid testing, medium voltage cable testing.
• Troubleshoot and test control circuits, communications systems, protections systems and other electrical apparatus.
• Perform breaker and relay retrofits.
• Ability to read prints and control/protection schemes.
• Complete and submit reports accurately and timely.
• All other duties as assigned by management.
• Applying test procedures for various types of relay test equipment.
• Substation awareness and Safety consciousness.
• Aptitude to quickly learn and apply test procedures for various types of substation equipment.
• Performs testing on low and medium voltage breakers including Megger, Ductor, Hi-Pot, Hi-Current, and Timing tests. 
• Testing on power transformers including Power Factor, TTR, Insulation Resistance, Winding Resistance.
• Completes mechanical work and repairs on breakers including wiring, painting, parts replacement.
• Utilizes and accurately reads meters. 
• Reading and plotting curves.

• Associate’s degree in Electrical Power or Electrical Engineering, or 5+ years of hands-on field experience.
• Experience as a Switchgear/High Voltage Technician.
• Proficiency with high voltage test equipment as well as knowledge of low and medium voltage test equipment.
• Proficient computer and phone skills, including Microsoft Office Suite (Word, Excel, Outlook).
• Ability to work a flexible schedule based on client/customer needs.
• Valid driver’s license.
• Effective communication skills.
• Extensive travel; up to 5 days/week with overnights possible.
• On call duty is required approximately six times per year.
• This position is very active and requires standing, walking, bending, stooping, crouching, climbing, crawling, and reaching frequently.
• Aerial work may sometimes be necessary, such as working on ladders or scaffolding.

One Tech Engineering is looking for a Substation Technician for a position located near Minneapolis, Minnesota. The Substation Technician will service and test transformers, relays, breakers, switches, and other electrical apparatus/systems at utility substations and industrial facilities.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have an Associate’s degree in Electrical Power or Electrical Engineering, or 5+ years of hands-on field experience.

Local candidates preferred. This is not a remote position.

• Ground grid testing, medium voltage cable testing.
• Troubleshoot and test control circuits, communications systems, protections systems and other electrical apparatus.
• Perform breaker and relay retrofits.
• Ability to read prints and control/protection schemes.
• Complete and submit reports accurately and timely.
• All other duties as assigned by management.
• Applying test procedures for various types of relay test equipment.
• Substation awareness and Safety consciousness.
• Aptitude to quickly learn and apply test procedures for various types of substation equipment.
• Performs testing on low and medium voltage breakers including Megger, Ductor, Hi-Pot, Hi-Current, and Timing tests. 
• Testing on power transformers including Power Factor, TTR, Insulation Resistance, Winding Resistance.
• Completes mechanical work and repairs on breakers including wiring, painting, parts replacement.
• Utilizes and accurately reads meters. 
• Reading and plotting curves.

• Associate’s degree in Electrical Power or Electrical Engineering, or 5+ years of hands-on field experience.
• Experience as a Switchgear/High Voltage Technician.
• Proficiency with high voltage test equipment as well as knowledge of low and medium voltage test equipment.
• Proficient computer and phone skills, to include Microsoft Office Suite (Word, Excel, Outlook).
• Ability to work a flexible schedule based on client/customer needs.
• Valid driver’s license.
• Effective communication skills.
• Extensive travel; up to 5 days/week with overnights possible.
• On call duty is required approximately six times per year.
• This position is very active and requires standing, walking, bending, stooping, crouching, climbing, crawling, and reaching frequently.
• Aerial work may sometimes be necessary, such as working on ladders or scaffolding.

One Tech Engineering is searching for a Transmission Engineer for a position located in either Charlotte, North Carolina, or Atlanta, Georgia. The Transmission Engineer will manage and perform responsibilities for transmission line design.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in Engineering and at least 3 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

Transmission Engineer Responsibilities:

• Perform, lead, and oversee all engineering responsibilities related to overhead transmission line design. This includes PLS-CADD modeling, line routing, structure analysis and loading trees, developing design criteria, sag-tension calculations, wire blowout, swing angle, damper recommendations, structure spotting, clearance reports, wire selection, etc.
• Prepare specifications for construction, hardware, and material for high voltage overhead transmission line (HV OH T-Line); structure design and development; hardware design and selection; and field installation supervision.
• Prepare construction drawings and cost estimates for high-voltage overhead transmission lines.
• Additional responsibilities include providing instruction and guidance to less experienced staff members.
• Other duties as assigned.

• Bachelor's degree in Engineering from an accredited program is required.
• A professional certification, EIT, and/or a professional engineer licensure is strongly desired.
• Minimum 3 years of related experience with routing and design of high voltage overhead transmission line facilities.
• Excellent written & verbal communication skills.
• Ability to work in a team environment and possess strong analytical and problem-solving skills is required.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Experience in 69kV to 500kV line design and working knowledge and/or expertise in Power Line system-based programs (i.e., PLS, PLS-CADD, PLS-POLE, etc.) preferred.
• Strong computer skills (e.g. Microsoft Office Suite).