Construction Manager Substation

One Tech Engineering is searching for a Safety Consultant for a position located near Amarillo, Texas. The Safety Consultant will provide safety oversight for all construction activities taking place on-site.
The candidate must be a US citizen or hold a green card. The candidate should have at least 5 years of related safety experience.

• Responsible for recognizing, monitoring, and making recommendations to correct workplace safety hazards through on-site audits, consulting, ergonomic assessments, and interventions according to OSHA and other regulatory agencies
• Collaborating on safety policy development and training.
• Conduct site safety orientations.
• Participate in Pre-Job Safety Reviews and project planning to ensure successful and safe execution of work tasks.
• Provide coaching to employees on safety practices.
• Conduct a weekly ‘all hands safety meeting’.
• Manage all hot work permitting.
• Oversee all incident investigations.
• Generate all required documentation in SiteDocs.

• At least 5 years of related safety experience.
• Previous experience working with utility contractors, and site personnel.
• Certified Utilities Safety Professional certification
• Working knowledge of OSHA Compliance.
• Proficient with Microsoft office; Spreadsheets in Excel

One Tech Engineering is searching for an Electrical Designer Assistant for a position located in Albuquerque, New Mexico. The Electrical Designer Assistant will assist in various phases of planning, site evaluations, analytical designs, report preparation, specifications, and preparation of proposal and construction documentation and electrical plans as part of a project team.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a bachelor's degree in drafting technology or a related field and 2 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Assist in designing various electrical project designs including creating electrical schematics, grid plan layouts, electrical power systems, lighting systems, protection and controls, and site and facility design. 
• Follow all company, client and project design and drafting standards.
• Assist with set up of electrical CAD configuration and procedures according to project requirements at the beginning of a project for the electrical design team.
• Assist in preparing engineering drawings from rough sketches or from general engineering and design information (verbal instructions and notes) using CAD software programs
• Assist with a full range of drawing production work including problem analysis, design layout and calculations on non-routine assignments of substantial variety and complexity.
• Assist with a variety of assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components and refining rough sketches.
• Assist with initial rough designs or sketches and redlines or mark-ups on ongoing projects.
• Assist with analyzing reports, drawings, and tests, to plan and design projects.
• Apply design codes and specifications related to design requirements.
• Complete and review design drawings within scope, budget and schedule. 
  Perform project tasks and assignments within budgeted hours and deadlines.
• Incorporate schedules, budgets and project criteria into electrical design and layouts.
• Organize and maintain all revisions of project drawings, plot files and project-related information in a logical and well-structured manner.
• Performs other duties as assigned
• Complies with all policies and standards.

• Bachelor’s Degree in drafting technology or related field and 2 years of related experience.
  
• Or an Associate’s Degree and 3 years of related experience.
  
• Or a High school diploma and 4 years of progressive detailing and design experience.
  
• Strong understanding of design software such as: AutoCAD, MicroStation, and Excel to develop the design deliverables. 
  
• Ability to learn and effectively utilize new design software programs.
  
• Ability to utilize both 2D and 3D applications to prepare engineering drawings.
  
• Basic knowledge in design, calculations and design systems.
  
• Basic knowledge in the theory and practices of engineering discipline; competent in the fundamental concepts of other disciplines as they relate to the assigned discipline; and capable of operating related discipline design software necessary to execute production tasks.
  
• Ability to work collaboratively with others (Project Managers, Engineers and Designers) in a multi-discipline project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
  
• Excellent written & verbal communication skills.
  
• Strong analytical and problem solving skills, and attention to detail.

One Tech Engineering is searching for an Electrical Engineer for a position located in Wallingford, Connecticut; Newton, Massachusetts; Conshohocken, Pennsylvania; or Morristown, New Jersey. The Electrical Engineer will responsible for the design of high voltage electrical substations.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a bachelor’s degree in electrical engineering or related degree and 3 years of electrical engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

Electrical Engineer Responsibilities:

• Preparation of proposals and scope development, including conceptual designs and execution plans.
• Prepare engineering cost and labor estimates and schedules.
• Physical substation design including yard layouts, plans, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of material.
• Protection and control design including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiring.
• Preparing calculations and reports for engineering studies. (grounding, lightning protection, AC/DC load studies, etc.)
• Preparing equipment specifications for procurement and/or factory acceptance testing.
• Coordinating design activities with other departments. (Civil/Structural, Networks, Transmission Line, others.)
• Providing guidance and mentoring to less experienced team members.
• Regularly meeting with and corresponding with clients or outside personnel.
• Performing quality reviews for other engineers and designers.
• Providing short-term field support during construction.
• Supporting business development and marketing initiatives.
• Other areas of involvement may include relay settings, 3D/intelligent design, or industry/professional technical committee involvement.
• Performing other duties as assigned.

• Bachelor's Degree in Electrical Engineering or related degree and 3 years of electrical engineering experience.
• Or a Bachelor's Degree in Electrical or related Engineering Technology and successful completion of the Fundamentals of Engineering (FE) exam and 3 years of electrical engineering experience required.
• Consulting experience preferred.
• Strong knowledge in standard engineering techniques and procedures.
• Excellent written and verbal communication skills.
• Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.
• Proficient in standard engineering techniques and procedures.
• Strong computer skills (e.g. Microsoft Office Suite)
• Strong computer skills include AutoCAD, MicroStation, 2D and 3D rendering programs and other analysis programs.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Engineers in Training-EIT Certification preferred.

One Tech Engineering is searching for a Civil Designer for a position located in Chesapeake, Virginia. The Civil Designer will perform various phases of planning, proposal preparation, site evaluations, analytical designs, report preparation, specifications, and preparation of water/wastewater construction documentation plans as part of a project team.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s degree in drafting technology or a related field and 7 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Develop drawings for production work including problem analysis, design layout and calculations on non-routine assignments of substantial variety and complexity.
• Execute variety of civil design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components and refining rough sketches.
• Execute changes to designs or sketches and mark-ups on ongoing projects.
  
• Analyze reports, maps, drawings, tests, and other topographical and geologic data to plan and design projects.
• Responsible for incorporating design codes and specifications related to design requirements.
• Review design drawings for quality assurance within scope, budget and schedule.
• Report volume calculations for excavation, dredging, and upland site grading.
• Responsible for revisions of project drawings, plot files and project-related information storage in a logical and well-structured manner..
• Performs other duties as assigned
• Complies with all policies and standards.

• Bachelor’s degree in drafting technology or related field and 7 years related experience.
• Or an Associate’s Degree and 8 years rof elated experience.
• Or 9 years of progressive detailing and design experience.
• Expert understanding of design software such as: AutoCAD, Civil 3D, MicroStation, and Excel to develop the design deliverables.
• Expert knowledge in design, calculations and design systems.
• Expert knowledge in the theory and practices of civil discipline; competent in the fundamental concepts of other disciplines as they relate to the assigned discipline; and capable of operating related discipline design software necessary to execute production tasks.
• Ability to work collaboratively with others (Project Managers, Engineers and Designers) in a multi-discipline project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
• Excellent written & verbal communication skills.
• Strong analytical and problem solving skills, and attention to detail.

One Tech Engineering is searching for an Industrial Engineering Technician for a position located in Denver, Colorado. The Industrial Engineering Technician supports and maintains essential systems across Colorado, including SCADA, DSL circuits, and fiber optics, to ensure the reliability of the electrical grid.

The candidate must be a US citizen or hold a green card. The candidate must have 5-7 years of experience with a prior telecommunications/voice/data background.

Industrial Engineering Technician Responsibilities:  

• Utilize ServiceNow to receive, prioritize, and respond to daily service tickets.
• Conduct fieldwork at substations and remote sites with attention to safety and regulatory compliance.
• Perform troubleshooting, testing, and installation of communication and networking equipment.
• Ensure compliance with company safety standards, fire-rating systems, and PPE requirements.
• Maintain documentation and asset tracking within SAP or other company systems.
• Work independently while contributing to a larger team of technicians.
• Communicate effectively with leads and team members to support overall network operations.

• 5-7 years of field technical experience with a prior telecommunications/voice/data background.
• Experience with Level II and Level III networking concepts, with exposure to Sienna and Nokia network systems.
• Proficient in identifying and working with different cabling types, including Cat 5/6 and fiber optics.
• Working knowledge of SAP.
• Familiarity with ServiceNow.
• BICSI, Nokia, or Cisco certifications are preferred
• Must have a valid driver’s license.

One Tech Engineering is searching for a Civil Designer for a position located in Kansas City, Missouri. The Civil Designer will perform various phases of planning, proposal preparation, site evaluations, analytical designs, report preparation, specifications, and preparation of construction documentation and environmental plans as part of a project team. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s degree in drafting technology or related field and 7 years related experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Work on various projects with a diverse portfolio of project types and clients.
• Design civil engineering projects including site design, land development, roads, storm drainage systems, storm water management facilities, water and sanitary sewer utility design, sediment and erosion control, and traffic control, airports, and facility design.
• Develop drawings for production work including problem analysis, design layout and calculations on non-routine assignments of substantial variety and complexity.
• Execute variety of civil design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components and refining rough sketches.
• Execute changes to designs or sketches and mark-ups on ongoing projects.
• Analyze reports, maps, drawings, tests, and other topographical and geologic data to plan and design projects.
• Responsible for incorporating design codes and specifications related to design requirements.
• Review design drawings for quality assurance within scope, budget and schedule.
• Report volume calculations for excavation, dredging, and upland site grading.
• Review schedules, budgets and project criteria into civil design and layouts.
• Responsible for revisions of project drawings, plot files and project-related information storage in a logical and well-structured manner.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor’s degree in drafting technology or related field and 7 years related experience.
• Or an Associate Degree and 8 years related experience.
• Or 9 years progressive detailing and design experience.
• Expert understanding of design software such as: AutoCAD, Civil 3D, MicroStation, and Excel to develop the design deliverables.
• Expert knowledge in design, calculations and design systems.
• Expert knowledge in the theory and practices of civil discipline; competent in the fundamental concepts of other disciplines as they relate to the assigned discipline; and capable of operating related discipline design software necessary to execute production tasks.
• Ability to work collaboratively with others (Project Managers, Engineers and Designers) in a multi-discipline project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
• Excellent written & verbal communication skills.

One Tech Engineering is searching for an Engineer for a position located in Denver, Colorado. The Engineer will be supporting natural gas, distribution, and infrastructure renewal projects.

The candidate must be a US citizen or hold a green card. The candidate should have a Bachelor’s degree in Mechanical, Manufacturing, or a related engineering field, and previous AutoCAD experience.

• Prepare and maintain engineering drawings using AutoCAD.
• Manage miscellaneous administrative paperwork, including project packages and procedural documentation.
• Serve as a point of contact for project management teams and third-party mechanical contractors, addressing questions and concerns related to engineering tasks and project execution.
• Understands and applies standard engineering principles.
• Creates simulations and prototypes to evaluate preliminary designs and test how a machine, structure, or system operates.
• Designs and tests components and integrates components to produce the final product.
• Monitors the quality of products and controls the efficiency of processes.
• Evaluates a design's overall effectiveness, cost, reliability, and safety. Investigates root causes of failures to maintain quality and recommends improvements.

• Bachelor’s degree in Mechanical, Manufacturing, or a related engineering field.
• Previous experience with AutoCAD.
• Experience in fluid systems, manufacturing processes, or welding is preferred.
• Proficient in Microsoft Office Suite (Word, Excel, Outlook, etc.).
• Strong organizational and time-management skills.
• Excellent verbal and written communication skills.
• Ability to produce clear and concise technical documentation.