Construction Project Manager

One Tech Engineering is searching for a Construction Project Manager for a position located in Vancouver, Washington. The Construction Project Manager will support the Engineer Procure Construct (EPC) Project Manager or Program Manager to oversee day-to-day operations from pre-construction through project completion and warranty periods. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Construction, Construction Management, Engineering, or a related field and 7 years of relevant project management experience in the construction industry.

Local candidates preferred or open to relocation. This is not a remote position.

• Responsible for the oversight of day-to-day construction activities and the successful execution of a single or multiple projects simultaneously.
• Provide direction and participate in project planning, scheduling, estimating, cost development, and establishing critical project objectives.
• Develop new and manage existing client relationships while interfacing with the client for proposal and project related items.
• Participate in internal and external project risk reviews and consult with Legal Department as required.
• Negotiate prime contracts, CM contracts, subcontracts, and change orders.
• Participate in risk review process.
• Implement assigned sections of the Project Execution Plan, including construction execution, construction quality assurance plan, safety & health plan, subcontracting plan, project staffing plan, organization chart, and procurement plan.
• Develop construction staffing plans and train project teams, coordinate activities of multiple global practices/disciplines, and facilitate the efficient cost-effective utilization of staff while adhering to contractual and performance requirements.
• Oversee the development of the project plan for site layout, mobilization and demobilization and support implementation.
• Verify all applicable project permits are secured in accordance with the project requirements.
• Direct and oversee the downstream request for proposal (RFP) and bid process and prepare detailed scope of work documents for subcontractor and client contractor contracts, including bidder development, prequalification, evaluation, award recommendation, and selection.
• Review, approve, and communicate internal and external reports including project budgeting, project cash flow forecast, and project status reports.  Present reports to Project Manager, Program Manager as well as internal and external executive management as required.
• Collaborate with engineering team to establish the development and distribution of engineering deliverables per project schedule and requirements.
• Develop processes and manage downstream contract administration including request for information (RFI’s), submittals, change management, contract closeout, documentation, and claims mitigation.
• Oversee Prime Contract, subcontractor, and client contractor invoicing process.
• Coordinate and facilitate client, supplier and company commissioning and startup teams as needed.
• Implement, audit, and oversee project documentation.
• Implement process for confirming project and subcontractor insurance, taxes/duties, licensures, and bonding requirements.
• Perform project safety, quality, progress and financial audits and assessments as required.
• Oversee and participate in the project-specific non-conformance reporting process.
• Responsible for facilitating project cost reporting, scheduling, work breakdown structure establishment, project set-up and closeout, and field progress tracking specific to construction and construction related activities or program level activities as required.
• Develop and oversee materials receiving and management process, including inventory control, receipt of goods, storage, and transportation as required.
• Review contract documents with field staff to verify compliance of subcontractors and client contractors, safety and health requirements, quality, and schedule.
• Direct the project turnover documentation, warranty administration, project closeout, and recordkeeping/retention processes and procedures.
• Support communication with governmental, industry, and public entities on project-related matters.
• Review construction field reports.
• Provide mentorship and training to interns, construction coordinators, craft supervision, and assistant construction project managers.
• Provide performance feedback for each project team member as requested to their respective Department Managers.
• Manage community and building trades relationships.
• Develop and implement project labor agreements with building trades as required.
• Onboard craft/field supervision as required.
• Manage composite crew rates to determine labor and equipment costs.
• Manage staffing on projects.
• Manage labor burdens including craft classifications, benefits and labor laws.
• Maintain accurate craft classifications and craft progression records.
• Uphold craft competency and training standards.
• Estimate, forecast and manage craft install unit rates.
• Manage earned value, schedule, change management and cost metrics.
• Mentor and foster craft training and identify advancement opportunities.
• Manage construction equipment to ensure adequate inventory to complete projects.
• May be assigned to a project site based on project requirements.
• Comply with company policies and procedures.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor’s Degree in Construction, Construction Management, Engineering, or a related field, and 7 years of relevant project management experience in the construction industry.
• Applicable experience may be substituted for the degree requirement.   
• Excellent computer skills and proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint, and Access).
• Experience with document control, scheduling, cost control and project management software is preferred.
• Excellent written and verbal communication skills and strong organizational skills.
• Strong analytical and problem-solving skills, and attention to detail.
• Ability to handle large volumes of work and multi-task in a fast-paced environment.
• Multiple years of experience on construction project sites or executing program management in the industries of aviation, commercial, energy, government, manufacturing, oil & gas, process, transportation, transmission & distribution, or water is preferred.
• A basic understanding of Generally Accepted Accounting Principles is required.
• Must be able to meet the company's driving requirements.

One Tech Engineering is looking for a Project Coordinator for a position located in Madison, Wisconsin. The Project Coordinator will be responsible for assigned key accounts, providing full customer service support, including order entry, order acknowledgment, job check-in, specification confirmation, job tracking, problem-solving, and issue resolution.

The candidate must be a US Citizen or a green card holder; the position is not eligible for sponsorship. The candidate should have at least 5 years’ experience in a customer service/estimating/planning position, including at least 3 years in the printing or print finishing industry.

Project Coordinator Responsibilities:

• Provide accurate estimates for incoming jobs defined as previous runs.
• Provide accurate job plans with clear direction for the production floor.
• Provide job change orders as required, edit processes, additional makereadies, and runs to correct for changes during production.
• Communicate and obtain customer approval as needed.
• Ability to open, evaluate, and discuss a variety of customer-supplied files.
• Recommend and implement modifications for product and service improvement based on customer information.
• Complete purchase orders for non-inventory items for jobs as needed.
• Responsible for assuring compliance with all applicable quality system procedures.
• Responsible for recognizing and implementing changes needed to streamline workflow from customer service to production.
• Responsible for profitability and feedback from their customer group.
• Coordinate press checks with customers.
• Primary contact for sales and assigned to customers’ needs.
• Limited travel for occasional customer visits.
  Provide vacation coverage for other members of the department when required.
  Responsible for all aspects of assigned customer relationships, including customer satisfaction and successful management of customer projects from the estimate through delivery and billing.

Requirements of the Project Coordinator:

• Minimum of 5 years’ experience in a customer service/estimating/planning position, including at least 3 years in the printing or print finishing industry.
• Minimum 2-year degree (Related work experience can be substituted).
• Experience and proficiency with computer-based order entry and job planning systems.
• High degree of accuracy and attention to detail, including numeric computation, written communication, and data entry.
• Strong organizational skills with the ability to handle multiple tasks.
• Strong communication and problem-solving skills.
• Ability to work in a team environment with frequent and multiple interactions.
• Familiar with PC based spreadsheets and word processing software.

One Tech Engineering is searching for a Civil Designer Assistant for a position located in Chicago, Illinois. The Civil Engineer will perform field activities such as site investigations, inspections, and assessments.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in civil engineering or a related degree from an ABET-accredited program and 3 years of civil engineering experience, consulting preferred.

Local candidates preferred or open to relocation. This is not a remote position.

• Create field reports and documentation of daily work performed on project sites.
• Produce accurate quantity data for use in the generation of contractor pay estimates and material certification.
  
• Coordinate with designers as required for shop drawing reviews, requests for information, and change orders.
• Maintain communication with Project Managers throughout the course of the project so they are informed of site progress.
• Maintain communication with the Section Manager throughout the course of the project regarding project progress and issues.
• Solve technical problems related to the project parameters.
• Interface with the client as needed.
• Ensure compliance with company and site safety policies.
• Have the ability to work productively in an office setting during downtime on project sites.
• All other duties as assigned.

• Bachelor's degree in civil engineering or related degree from an ABET-accredited program and 3 years of civil engineering experience.
• Or a Bachelor's degree in civil or related engineering technology from an ABET-accredited program and successful completion of the Fundamentals of Engineering (FE) exam and 3 years of civil engineering experience.
• Or a Master's degree in civil engineering and 2 years of civil engineering experience.
• Strong knowledge of standard civil engineering techniques and procedures.
• Excellent written and verbal communication skills.
• Strong computer skills (e.g., Microsoft Office Suite).
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Engineers in Training-EIT Certification is preferred.

One Tech Engineering is searching for a Senior Civil Designer Assistant for a position located in Chicago, Illinois. The Senior Civil Engineer will lead civil design of projects from the conceptual phase through design completion for project needs and requirements that are set forth by the project managers.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in Civil Engineering or a related degree from an ABET-accredited program and 7 years of civil engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Prepare civil equipment: packaged equipment and construction specifications and data sheets, Request's for Qualifications (RFQ's), technical bid summaries, and purchase recommendations.
• Review civil vendor drawings; data interface with suppliers, clients other engineering disciplines, detailers, designers.
• Participate in development of project schedule, scope, budget staffing planning and construction planning.
• Responsible for effective management of change orders.
• Applies expert knowledge of commonly used civil concepts, practices, codes and procedures within the civil engineering services industry.
• Compiles studies and reports.
• Writes specifications.
• Applies knowledge and experience to complex projects, find's/develops non-standard design solutions.
• Quality review production drawings for a variety of projects and project related data as required by the project managers to verify design compliance with project, client, and industry standards, including constructability.
• Quality review the construction administration including coordination with field personnel to resolve design related installation issues, calculations, field inspections and testing of materials.
• Leads field inspections, installation, measurements or calculations for public and private clients.
• Prepare and present technical reports for clients and industry publications.
• Build effective relationships with existing clients, customers and contractors and develop new business opportunities.
• Responsible for ensuring customer satisfaction goals and expectations are met.
• Participate sales and marketing efforts and identify, lead and manage key pursuits.
• Lead the development of cost proposals and qualification statements to achieve stated targets and standards for financial performance.
• Prepare, present and manage project budgets and cost estimates.
• Report project performance.
• Provide leadership, guidance and instruction to the civil engineering practice.
• Mentor and guide less experienced engineers.
• Responsible for QA/QC process adherence.
• Responsible for effective communication with other engineering disciplines.
• Responsible for compliance with company and site safety policies.
• Performs other duties as assigned
• Complies with all policies and standards

• Bachelor's Degree in Civil Engineering or related degree from an ABET-accredited program and 7 years of civil engineering experience.
• Or a Bachelor's Degree in Civil or related Engineering Technology from an ABET-accredited program and successful completion of the Fundamentals of Engineering (FE) exam and 7 years of civil engineering experience.
• Or a Master's Degree in Civil Engineering and 6 years of civil engineering experience.
• EPC project experience preferred.
• Excellent written and verbal communication skills.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Ability to perform quality reviews for detailed engineering documents and specifications.
• A Professional Engineer (PE) License is preferred.

One Tech Engineering is searching for a Shipping Clerk for a first shift position located in Madison, Wisconsin. The Shipping Clerk will be responsible for packing products for shipping, loading/unloading trucks, and operating forklift and pallet moving equipment.

The candidate must be a US citizen or hold a green card. The candidate should have previous experience in shipping, receiving, and driving a forklift.

• Packing products for shipping.
• Loading/unloading trucks.
• Operating forklift and pallet-moving equipment.
• Verifying incoming material against the bill of lading.
• Creating shipping paperwork.
• Coordinating shipping arrangements with customers.
• Moving materials to appropriate locations.

• High school diploma or equivalent.
• 1-3+ years of shipping experience.
• Experience driving forklift, preferred.
• Strong communication skills.
• Basic computer skills.
• Strong work ethic.

Physical Demands

• Able to stand for 8 hours in a day.
• Able to lift 40 lbs. with or without accommodations repetitively with a 70-lb. maximum.

One Tech Engineering is searching for an Operator for a position located in Madison, Wisconsin. The Operator will complete job tickets completely and accurately and will maintain assigned equipment through proper cleaning, adjusting, and lubricating. The Operator will be on second shift, Monday – Friday (3:00 PM – 11:00 PM).

The candidate must be a US citizen or hold a green card. The candidate should have reliable transportation and an eagerness to learn and train.

• Operates assigned equipment in accordance with company policy and procedures.
• Exercises the responsibility for the prevention of loss or damage of assigned equipment, company properties, and customer materials.
• Completes job tickets completely and accurately.
• Notifies the Supervisor of any problems that will impact quality or meeting scheduled completion time.
• Maintains assigned equipment through proper cleaning, adjusting, and lubricating.
• May train new operators on the equipment.
• Perform basic troubleshooting on assigned equipment.
• Perform all quality checks that are required.
• Reports to Production Supervisor.
• Regular contact with Supervisors and other operators.

• High School Diploma or Equivalent.
• 6 months of experience operating printing or print finishing equipment, preferred.
• Good mechanical skills.
• Strong problem-solving skills.
• Good eye for detail and quality.
• Good oral and written communication skills.
• Ability to read and understand job tickets.
• Able to lift 40 pounds with or without accommodations.
• Periodic lifting, twisting, and bending are required.
• Standing for the duration of the shift.

One Tech Engineering is searching for an Electrical Designer Assistant for a position located in Albuquerque, New Mexico. The Electrical Designer Assistant will assist in various phases of planning, site evaluations, analytical designs, report preparation, specifications, and preparation of proposal and construction documentation and electrical plans as part of a project team.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in drafting technology or a related field and 2 years of related experience.
  
Local candidates preferred or open to relocation. This is not a remote position.

Electrical Designer Assistant Responsibilities:

• Assist in designing various electrical project designs including creating electrical schematics, grid plan layouts, electrical power systems, lighting systems, protection and controls, and site and facility design. 
• Follow all company, client, and project design and drafting standards.
• Assist with set up of electrical CAD configuration and procedures according to project requirements at the beginning of a project for the electrical design team.
• Assist in preparing engineering drawings from rough sketches or from general engineering and design information (verbal instructions and notes) using CAD software programs
• Assist with a full range of drawing production work including problem analysis, design layout, and calculations on non-routine assignments of substantial variety and complexity.
• Assist with a variety of assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components and refining rough sketches.
• Assist with initial rough designs or sketches and redlines or mark-ups on ongoing projects.
• Assist with analyzing reports, drawings, and tests, to plan and design projects.
• Apply design codes and specifications related to design requirements.
• Complete and review design drawings within scope, budget and schedule. 
• Perform poject tasks and assignments within budgeted hours and deadlines.
• Incorporate schedules, budgets and project criteria into electrical design and layouts.
• Organize and maintain all revisions of project drawings, plot files and project-related information in a logical and well-structured manner.
• Performs other duties as assigned
• Complies with all policies and standards.  

Requirements of the Electrical Designer Assistant:

• Bachelor’s Degree in drafting technology or related field and 2 years of related experience.
• Or Associate Degree and 3 years of related experience.
• Or 4 years of progressive detailing and design experience.
• Strong understanding of design software such as: AutoCAD, MicroStation, and Excel to develop the design deliverables. 
• Ability to learn and effectively utilize new design software programs.
• Ability to utilize both 2D and 3D applications to prepare engineering drawings.
• Basic knowledge in design, calculations and design systems.
• Basic knowledge in the theory and practices of engineering discipline; competent in the fundamental concepts of other disciplines as they relate to the assigned discipline; and capable of operating related discipline design software necessary to execute production tasks.
• Ability to work collaboratively with others (Project Managers, Engineers and Designers) in a multi-discipline project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
• Excellent written & verbal communication skills.
• Strong analytical and problem-solving skills, and attention to detail.

One Tech Engineering is looking for a Maintenance Technician for a position located in Madison, Wisconsin. The Maintenance Technician will be responsible for performing routine building maintenance, preventative maintenance on our machines, installing new equipment, electrical and plumbing repairs, and more. The Maintenance Technician will be on first shift, Monday – Friday (7:00 AM – 3:00 PM).

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have previous experience with electrical troubleshooting and PLCs.

Maintenance Technician Responsibilities:

• Performing routine building maintenance.
• Preventative maintenance on the machines.
• Installing new equipment.
• Electrical and plumbing repairs, and more.

Requirements of the Maintenance Technician

• Associate's degree in a related field or equivalent experience.
• Minimum of 4 years of experience performing machine maintenance.
• Strong mechanical skills.
• Good communication and problem-solving skills.
• Electrical repair and troubleshooting experience.
• Able to diagnose and program PLC & HMI.
• Must furnish own Mechanic set of tools in Metric and Standard.
• Must furnish own locking toolbox.

Preferred Skills

• Knowledge and experience using Mills, Lathes, and Band Saws.
• Able to read mechanical drawings.
• Diagnose and repair chain-driven and gear-driven equipment.
• Diagnose and repair A.C. & D.C motors and controls, including VFD motors
• Mig welding experience..

Physical Demands

• Ability to work with heavy machinery.
• Periodic lifting and working in different positions that may include kneeling, laying, standing, or sitting.
• Ability to lift 40 pounds with or without accommodations.

• Packing products for shipping.
• Loading/unloading trucks.
• Operating forklift and pallet-moving equipment.
• Verifying incoming material against bill of lading.
• Creating shipping paperwork.
• Coordinating shipping arrangements with customers.
• Moving materials to appropriate locations.

• High school diploma or equivalent.
• 1-3+ years of shipping experience.
• Experience driving a forklift, preferred.
• Must be familiar with a bill of lading.
• Strong communication skills.
• Basic computer skills.
• Strong work ethic.

• Able to stand for 8 hours in a day.
• Able to lift 40 lbs. with or without accommodations repetitively with a 70-lb. maximum.