Marketing Manager

One Tech Engineering is searching for an Electrical Engineer for a position located in Denver, Colorado. The Electrical Engineer will support day-to-day maintenance and equipment replacement activities at substations

The candidate must be a US citizen or hold a green card. The candidate should have a Bachelor's degree in Electrical Engineering and 5+ years of related experience.

• Lead like-for-like replacements and upgrades of substation equipment (e.g., breakers, switches, transformers, relays, bushings, arresters).
• Perform troubleshooting and resolve equipment and system issues.
• Initiate and manage small to mid-sized substation projects.
• Order and track materials required for maintenance and replacement work.
• Develop and adjust designs as needed for brownfield environments.
• Coordinate with construction teams to execute projects safely and efficiently.
• Manage project schedules and ensure timely completion of work.
• Communicate effectively with stakeholders, including construction and substation maintenance teams.
• Prepare and deliver scoped work packages and materials requisitions.
• Oversee field coordination and ensure successful completion of replacement and maintenance activities.

• Bachelor’s degree in Electrical Engineering.
• 5+ years of related experience.
• Knowledge of substation equipment and troubleshooting experience, or strong willingness to work in the field.
• Familiarity with brownfield replacement and maintenance workflows.
• Experience with stakeholder coordination, project initiation, and materials ordering.
• Previous substation engineering design experience preferred.
• Experience with SAP, ProjectWise, and basic PLC/logic programming is a plus (not required).
• Professional Engineer (PE) license preferred.

One Tech Engineering is searching for a Project Controls Specialist for a position located in Oak Ridge, Tennessee. The Project Controls Specialist will be responsible for leading the project controls processes with the internal project management team to execute project deliverables within budget and schedule.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in engineering, construction management, or a related field, and 3 years of direct project controls experience required or applicable experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Analyze data, review logs, and run reports in the Enterprise Planning & Controls software or other tools.
• Create Work Breakdown Structure (WBS).
• Develop, implement, and maintain effective scheduling reports, cost reports, cash flows and forecasts for multiple projects.
• Follow project execution plans.
• Responsible for engineering, procurement and construction planning, scheduling, logistics and cost control.
• Serves as a point of contact for technical questions from the project team.
• Approve Purchase Orders and/or Subcontracts for proper coding.
• Input and document changes to cost reports or forecasts.
• Interfaces with the Project Management Team and Accounting Department to review project costs and contingency costs and support external audits.
• Review upstream (prime contract) and downstream (purchase order & subcontract) change orders.
• Develop and present a cash flow report.
• Develop various levels of schedules.
• Apply and review the entry of logic ties within the schedules.
• Monitor resource loading of a schedule.
• Support Interactive Project Planning Meetings (IPPM).
• Create various schedule reports and determine appropriate reporting format.
• Develop, review, and analyze pre-programmed project scheduling reports and back-up documentation for accuracy.
• Consults with the project team on schedule progress.
• Analyzes and evaluates schedule management involving the critical path method of scheduling techniques, estimating, project cost management and forecasting.
• Perform schedule what-if scenarios.
• Develop and maintain an earned value management system.
• Input and validate progress measurement.
• Develop and maintain progress curves.
• Perform material takeoffs.
• Perform quality checks and inspections on project controls deliverables.
• Perform field audits to validate accuracy of reporting and processes.
• Capable of assisting with Project Forensic Analysis.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor’s Degree in engineering, construction management or related field and 3 years of direct project controls experience.
• Experience with Oracle Primavera P6 preferred.
• Excellent written and verbal communication skills.
• Excellent interpersonal skills.
• Proficient with Microsoft Office.
• OSHA 10-hour safety certification or ability to obtain.

One Tech Engineering is searching for a Mechanical Detailer Assistant for a position located in Phoenix, Arizona. The Mechanical Detailer Assistant will assist with plans and prepare non-routine drawings with complex features using information from rough sketches, detailed engineering notes or brief verbal guidance.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in drafting technology or a related field and 2 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Collect initial drawings, calculations and design ideas from engineers, and combine relevant data into coherent and complete initial design models for review and modification
• Apply company, client, and project drafting standards and procedures to draft control schematics, wiring diagrams and equipment connection diagrams.
• Assist in coordinating with engineers and project managers to understand project requirements and verify design details according to company standards and best practices
• Assist in providing a range of drawing production work including problem analysis, layout, detailing, and drafting on projects of substantial variety and complexity.
• Assist in drafting activities with designers and drafters in other disciplines.
• Communicate and correspond with internal design resources and external clients and personnel.
• Execute design changes and project drawing revisions.
• Maintain CAD proficiency and work toward mastering current CAD systems.
• Performs other duties as assigned
• Complies with all policies and standards

• Bachelor’s Degree in drafting technology or related field and 2 years of related experience.
• Or an Associate's Degree and 3 years of related experience.
• Or a High School Diploma/GED and 4 years of progressive detailing and design experience.
• Strong understanding of design software such as: AutoCAD, MicroStation, and Excel to develop the design deliverables.
• Ability to learn and effectively utilize new design software programs.
• Ability to utilize both 2D and 3D applications to prepare engineering drawings.
• Basic knowledge in design, calculations and design systems.
• Basic knowledge in the theory and practices of engineering discipline; competent in the fundamental concepts of other disciplines as they relate to the assigned discipline; and capable of operating related discipline design software necessary to execute production tasks.
• Ability to work collaboratively with others.
• Excellent written & verbal communication skills.
• Strong analytical and problem-solving skills, and attention to detail.

One Tech Engineering is searching for a Substation Construction Manager for a position located in Hamburg, Arkansas; Shawboro, North Carolina; and Jackson, Ohio. The Substation Construction Manager will be responsible for overseeing and directing all on-site construction activities for electrical substation projects.


The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have 8+ years of experience in electrical substation construction or T&D projects.

• Lead day-to-day field construction activities for substation projects (greenfield, brownfield, expansions, upgrades).
• Supervise site superintendents, foremen, subcontractors, and craft labor.
• Develop and execute construction work plans, sequencing, and manpower plans.
• Coordinate outage schedules and tie-ins with utilities and system operators.
• Champion a zero-incident safety culture across all project sites.
• Enforce site-specific safety plans, JHAs, and company safety policies.
• Ensure compliance with OSHA, NESC, NFPA 70E, and utility safety standards.
• Conduct toolbox talks, safety audits, and incident investigations.
• Drive adherence to the project schedule and milestone dates.
• Monitor labor productivity, equipment utilization, and material availability.
• Identify and mitigate construction risks and schedule impacts.
• Ensure construction meets approved drawings, specifications, and standards.
• Coordinate inspections, testing, and quality documentation.
• Resolve field conflicts, constructability issues, and non-conformances.
• Interface with engineering teams on constructability reviews and RFIs.
• Coordinate material deliveries (transformers, breakers, steel, control buildings).
• Support commissioning, testing, and energization activities.
• Serve as the primary on-site representative for clients and utility personnel.
• Participate in progress meetings and provide field updates.
• Coordinate with AHJs, inspectors, and third-party owners’ engineers.
• Track field costs, labor hours, and equipment usage.
• Support change management, time-and-material work, and daily reports.
• Assist with punch list completion and project closeout.

• 8+ years of experience in electrical substation construction or T&D projects.
• Strong hands-on knowledge of substation construction means and methods.
• Proven leadership experience managing field crews and subcontractors.
• In-depth knowledge of electrical safety practices and energized work environments.
• Ability to read and interpret construction drawings and specifications.
• Willingness to travel extensively and work from project sites.
• Experience with utility-scale or EPC substation projects is preferred.
• Experience with high-voltage systems (69kV–500kV) is preferred.
• Electrical trade background or construction management degree is a nice-to-have.
• Familiarity with relay testing, protection & control, and commissioning processes is a nice-to-have.

One Tech Engineering is searching for a Project Manager for a position located in Denver, Colorado. The Project Manager will be supporting the Processing Controls Engineering group within the gas organization.

The candidate must be a US citizen or hold a green card. The candidate should have 7+ years of project management experience in the natural gas utility space.

• Manage multiple capital projects related to facilities and stations within the natural gas transmission and distribution system.
• Oversee project scope, schedule, and budget across multiple initiatives.
• Utilize the company’s structured Stage Gate (7-gate) project management process.
• Coordinate contractors and internal cross-functional teams.
• Lead cross-functional team (CFT) meetings.
• Manage project forecasts, accruals, and financial tracking.
• Oversee engineering, construction, and project closeout activities.

• 7+ years of project management experience within the natural gas utility industry.
• Strong background in gas facilities and station projects is preferred.
• Experience with utility or LDC transmission and distribution projects.
• Solid understanding of scope, schedule, and budget management.
• Experience with financial forecasting, estimating, and accrual tracking.
• Ability to manage multiple concurrent projects effectively.
• Familiarity with MS Excel, SAP, and Primavera P6 is a plus.
• PMP certification is preferred but not required.

One Tech Engineering is searching for a Mechanical Construction Supervisor for a position located near Seminole, Texas. The Mechanical Construction Supervisor will oversee and inspect EPC contractor work to ensure compliance with drawings, specifications, and contract requirements.

The candidate must be a US citizen or hold a green card. The candidate should have  7–10 years of experience in Mechanical Construction oversight.

• Oversight of mechanical construction activities.
• Perform quality inspections using ArcGIS / Survey123 and inspection templates.
• Verify EPC contractor work meets contract and design requirements.
• Document inspection results and findings in the company systems.
• Participate in daily Plan of the Day (POD) meetings.
• Coordinate inspection readiness with EPC contractor.

• 7–10 years of experience in Mechanical Construction oversight.
• Strong background in quality control inspections.
• Power plant experience (gas, coal, or similar) strongly preferred.
• Combustion turbine experience a plus, but not required.
• Experience with ArcGIS, Survey123, or Procore preferred.
• Valid driver’s license and ability to pass a criminal background check.

One Tech Engineering is searching for a Construction Supervisor for a position located in Denver, Colorado. The Construction Supervisor will provide dedicated on‑site leadership, and provide construction insights into project planning, to ensure safe, efficient, and high‑quality project execution.

The candidate must be a US citizen or hold a green card. The candidate should have 7+ years in design, construction, operations, engineering or maintenance of utility systems/power generation plants or related industries/fields or equivalent.

• Lead daily field supervision, setting priorities and monitoring safety, quality, and schedule performance.
• Coordinate vendors and contractors, ensuring alignment on access, logistics, and work sequencing.
• Support scheduling, drawing constructability reviews, estimate reviews, site logistics, and other early project planning to improve deliverability.
• Manage site logistics, material handling, equipment utilization, and resource readiness.
• Oversee quality and safety programs through inspections, briefings, and issue resolution.
• Maintain real‑time communication with project teams and provide clear daily/weekly reporting.

• 7+ years in design, construction, operations, engineering or maintenance of utility systems/power generation plants or related industries/fields.
• Associates or technical degree preferred.
• Field experience, including a working knowledge of techniques, materials, terminology of field construction/maintenance and inspection activities.
• Demonstrated technical expertise in specific functional areas including standards, procedures, and applicable government/environmental regulations. 
• Strong planning skills and experience with determining crew sizes and durations for construction activities.
• Familiarity with work packages, construction task planning, and work and asset management applications. 
• Completion of an approved apprentice program in an appropriately related craft is preferred.
• Demonstrated understanding of utility finance is preferred.

One Tech Engineering is searching for an Electrical Superintendent for a position located in Battle Creek, Michigan. The Electrical Superintendent will be responsible for field operations on the assigned project(s) in order to achieve safe, timely and profitable completion of each project.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Construction Management, Engineering, or related degree and a minimum of 7 years of construction management or craft supervision experience on electrical projects

Local candidates preferred or open to relocation. This is not a remote position.

• Responsible for the oversight of the following project work activities: raceway, cable tray, electrical panels, duct bank, grounding, switchgear, transformers, low and medium voltage electrical equipment, wiring, motors, heat tracing, instrumentation, instrumentation calibrations, loop checks and point to point checks, and electrical and control testing.
• Responsible for overall supervision of construction effort, which includes: safety, productivity of crafts, efficient use of materials and equipment, materials management, scheduling, engineering, and contractual performance of the project.
• Responsible for subcontractor contractual compliance on designated electrical construction related activities.
• Build effective client and subcontractor relationships.
• Interface with client representatives, A/E representatives, and other contractors.
• Collaborate with project management to develop and implement project procedures, working documents, and standards.
• Authorize purchase requisitions, field design change requests, etc., under supervision of Construction Manager and Project Manager.
• Responsible for overall project safety. Reviews and audits site specific safety documentation, including Pre-Task Analysis (PTAs) and Task Safety Observations (TSOs) on a regular basis.
• Provide oversight of electrical and instrumentation installation. Conduct and record related tests and provide oversight for the calibration of instruments.
• Complete daily field reports and take daily pictures to document construction progress.
• Assess future work activities and identify any concerns with work plans by utilizing subcontractors 3-week look ahead report.
• Develop a marked-up and as-built set of drawings to produce the record set documents, and answer RFIs with assistance from Assistant Project Manager or Field Engineer.
• Direct and manage subcontractors as necessary to comply with the established project schedule, and track and verify progress on an installed quantity and work hour basis.
• Verify material deliveries meet specifications and are being stored properly and required preventative maintenance and/or temporary heating is being performed by the subcontractor (this potentially is coordinated with the Materials Manager).
• Coordinate with the QA/QC Manager to verify all welders on site are qualified to weld on the project.
• Witness all equipment setting and alignment.
• Walk down all systems prior to, during, and post hydrostatic testing to verify compliance with drawings and specifications and signing off on completed system testing and restoration.
• Develop punch lists of items out of compliance or not completed.
• Verify the most current drawing revisions are being used in the field.
• Understand and execute the project scope and any changes that develop.
• Ensure field change orders are executed.
• Oversee and build effective relationships with craft supervision and project staffing as required.
• Provide oversight of project site material and tool management.
• Responsible for the daily field construction of an individual project in accordance with the established policies, procedures, systems, and requirements approved by the company.
• Supervises and directs the daily efforts of the physical construction of the project through daily coordination of all field activities, subcontractor direction, and code/specification compliance.
• Read, interpret, and understand isometric drawings, structural drawings, and P&ID's.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor’s Degree in Construction Management, Engineering, or related degree and a minimum of 7 years of construction management or craft supervision experience on electrical projects.
• Or an Associate Degree and a minimum of 9 years of construction management or craft supervision experience on electrical projects.
• Or a High School Diploma/GED and a minimum of 11 years of construction management or craft supervision experience on electrical projects.
• Excellent computer skills and proficiency in Microsoft Office.
• Experience with document control, scheduling, cost control and project management software is preferred.
• Excellent written and verbal communication skills and strong organizational skills.
• Strong analytical and problem-solving skills, and attention to detail.
• Ability to handle large volumes of work and multi-task in a fast-paced environment.
• Multiple years of experience on construction project sites or executing program management in the industries of aviation, commercial, energy, government, manufacturing, oil & gas, process, transmission & distribution, transportation, or water is preferred.
• Must be able to meet the company's driving requirements.

One Tech Engineering is looking for an Electrical Designer for a position located in Wausau, Wisconsin. The Electrical Designer will create and maintain schematics, wiring diagrams, layout drawings and parts lists used for the manufacture and installation of equipment.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have an Associate's degree and 2+ years of related experience.

Local candidates preferred. This is not a remote position.

• Create detailed and assembly drawings of design components and circuitry using computer-aided design (CAD) software and standard drafting techniques.
• Select and design parts to meet functional, cost and delivery requirements, and create lists of parts used for the procurement, manufacturing and installation of equipment.
• Consult with engineers to discuss and interpret design concepts and determine requirements of detailed working drawings.
• Understand manufacturing and installation processes and what is required on detail and assembly drawings to accomplish them.
• Read and understand schematics and drawings of mechanical systems.
• Maintain parts database and drawing libraries.
• Review work performed by his/her peers for correctness.
• Perform equipment sizing and design calculations.
  
  

• Associate’s degree (two year college or technical school).
• 2 - 4 years of related experience.
• Computer Skills including EPLAN, Autodesk AutoCAD Electrical, and Microsoft Office.
• Knowledge of NEC & UL 508A requirements.

One Tech Engineering is looking for a Mechanical Engineer for a position located in Wausau, Wisconsin. The Mechanical Engineer will design and implement mechanical and hydraulic systems for industrial and electrical generation facilities along with generating all design work associated with assigned projects, including design reports, documentation, and programming.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s degree in mechanical engineering or a technical degree plus 5 years of related experience.

Local candidates preferred. This is not a remote position.

• Commissioning of mechanical and hydraulic systems.
• Design and implement mechanical and hydraulic systems. 
• Design hydraulic schematic diagrams.
• Design, develop, test, and start-up projects as requested.
• Interpret mechanical drawings.
• Perform demolition and installation engineering.
• Perform design reviews.
• Perform FAT, installation supervision, SAT, customer training, and system commissioning as requested.
• Perform hydraulic calculations for system sizing and component selection.
• Perform mechanical calculations for system sizing and component selection.
• Perform Mechanical Design.
• Perform onsite inspections and project “kick-off” meetings as assigned.
• Perform peer reviews.
• Prepare O&M manual, factory acceptance test (FAT), installation, site acceptance test (SAT), and customer training documents.
• Provide installation conceptual system engineering.
• Provide static and dynamic calculations.
• Design machines, brackets, supports, and piping for a variety of new and existing equipment.
• Support Engineering division as requested.
• Utilize electrical and hydraulic test equipment.
• Work effectively with all other project team members such as control, electrical, HMI, and mechanical disciplines.
• Work with mechanical designers to develop mechanical and hydraulic drawings.

• Bachelor’s degree in mechanical engineering or a technical degree plus 5 years of related experience.
• Experience with hydraulic systems, including hydraulic power units, hydraulic control manifolds, and hydraulic cylinders.
• Strong conceptualization ability along with strong interpersonal, communication, and organizational skills, including the ability to explain complex technical issues to decision-makers and project teams.
• Experience with Autodesk Inventor.
• USA or Canadian Professional engineering registration or the ability to become registered.
• Ability to travel more than 30% domestically and internationally.

One Tech Engineering is looking for a Controls Engineer for a position located in Wausau, Wisconsin. The Controls Engineer will design and implement PLC control and protection systems for industrial and electrical generation facilities.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s degree in electrical engineering or a technical degree plus 3 years of related experience.

Local candidates preferred. This is not a remote position.

• Commissioning of electrical, automation, and hydraulic systems.
• Program and Troubleshoot PLC-based control systems.
• Program and Troubleshoot HMI and Operator Interfaces.
• Design electrical schematic diagrams, external electrical wiring diagrams, field instrumentation systems, internal panel wiring drawings, and PLC drawings.
• Design, develop, test, and start-up projects as requested.
• Ensure effective information handoffs.
• Interpret electrical drawings.
• Interpret mechanical drawings.
• Perform onsite inspections and project “kick-off” meetings as assigned.
• Perform peer reviews.
• Perform electrical calculations for system sizing and component selection.
• Perform FAT, installation supervision, SAT, customer training, and system commissioning as requested.
• Prepare O&M manual, factory acceptance test (FAT), installation, site acceptance test (SAT), and customer training documents.
• Support Engineering division as requested.
• Utilize electrical and hydraulic test equipment.
• Work effectively with all other project team members such as control, electrical, HMI, and mechanical disciplines.
• Work with designers to develop drawings.
  
  

• Bachelor’s degree in electrical engineering or a technical degree plus 3 years of related experience.
• Prior experience in PLC and HMI programming.
• Ability to travel more than 30% domestically and internationally.
• Familiarity with power generation equipment, turbine governors, or excitation systems
• Strong conceptualization ability along with strong interpersonal, communication, and organizational skills, including the ability to explain complex technical issues to decision-makers and project teams.
• Experience with AutoCAD, or EPlan.
• USA or Canadian Professional engineering registration or the ability to become registered.

One Tech Engineering is looking for a Mechanical Designer for a position located in Wausau, Wisconsin. The Mechanical Designer will create detailed and assembly drawings of design components and assemblies using computer-aided design (CAD) software and standard drafting techniques.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have an Associate’s degree (two-year college or technical school).

Local candidates preferred. This is not a remote position.

• Select and design parts to meet functional, cost and delivery requirements, and create parts lists used for the procurement, manufacturing and installation of equipment.
• Consult with engineers to discuss and interpret design concepts, and determine requirements of detailed drawings.
• Understand manufacturing and installation processes and what is required on detail and assembly drawings to accomplish them.
• Read and understand schematics and drawings of electrical systems.
• Maintain parts database and drawing libraries.
• Review work performed by his or her peers for correctness.
  
  

• Associate’s degree (two-year college or technical school).
• Computer Skills including Autodesk Mechanical Desktop, Autodesk Inventor, Infor, Microsoft Office
• Knowledge of Geometric Tolerancing, Welding Practices and Symbols and Hydraulic Circuits and Symbols
• Must be willing to work overtime, weekdays, and weekends to meet customer service requirements.

One Tech Engineering is searching for a Civil Engineer for a position located in La Jolla, California. The Civil Engineer will work on project teams to create designs for new projects, alterations and redevelopments on a variety of projects including power, process, corporate, healthcare, pipeline airports, institutional, industrial, manufacturing, government and military facilities. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Civil Engineering or related degree from an ABET accredited program and a minimum of 3 years of civil engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Perform civil design of projects from the conceptual phase through design completion.
• Modify and review production drawings for a variety of projects including, but not limited to: power plants, process facilities, industrial facilities, healthcare facilities, airports, educational institutions, commercial, and governmental and military facilities.
• Design civil components for project needs and requirements that are set forth by the project managers.
• Applies strong knowledge of commonly used civil engineering/design concepts, principles, practices, codes, and procedures within the civil engineering services industry.
• Research and compile project related data as required by the project managers.
• Compiles studies and reports. Writes specifications.
• Update drawings provided by senior engineers to verify corrections are made within multiple CAD related software.
• Compiles information for client presentations, shop drawing review, and contract administration for the design of power, process, pipeline, industrial, healthcare, airports, educational institutions, commercial, and governmental and military facilities.
• Performs field inspections, measurements or calculations for public and private clients.
• Performs other duties as assigned
• Complies with all policies and standards.

• Bachelor’s Degree in Civil Engineering or related degree from an ABET accredited program, and minimum 3 years of civil engineering experience
• Or a Bachelor’s Degree in Civil or related Engineering Technology from an ABET accredited program and successful completion of the Fundamentals of Engineering (FE) exam and minimum 3 years of civil engineering experience.
• Or a Master’s Degree in Civil Engineering and min 2 years of civil engineering experience.
• Strong knowledge of standard civil engineering techniques and procedures.  
• Excellent written and verbal communication skills.  
• Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.  
• Proficient in Microsoft Office Suite.
• Strong computer skills (e.g. AutoCAD, MicroStation, BIM (Revit), Civil 3D, PLS, PLS-CADD, RISA-3D, MathCADD), and/or hydraulic, hydrologic, pavement, civil analysis programs.  
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.  
• Engineers in Training-EIT Certification is preferred.

One Tech Engineering is looking for a Substation Technician for a position located near Oshkosh, Wisconsin. The Substation Technician will service and test transformers, relays, breakers, switches, and other electrical apparatus/systems at utility substations and industrial facilities.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have an Associate’s degree in Electrical Power or Electrical Engineering, or 5+ years of hands-on field experience.

Local candidates preferred. This is not a remote position.

• Ground grid testing, medium voltage cable testing.
• Troubleshoot and test control circuits, communications systems, protections systems and other electrical apparatus.
• Perform breaker and relay retrofits.
• Ability to read prints and control/protection schemes.
• Complete and submit reports accurately and timely.
• All other duties as assigned by management.
• Applying test procedures for various types of relay test equipment.
• Substation awareness and Safety consciousness.
• Aptitude to quickly learn and apply test procedures for various types of substation equipment.
• Performs testing on low and medium voltage breakers including Megger, Ductor, Hi-Pot, Hi-Current, and Timing tests. 
• Testing on power transformers including Power Factor, TTR, Insulation Resistance, Winding Resistance.
• Completes mechanical work and repairs on breakers including wiring, painting, parts replacement.
• Utilizes and accurately reads meters. 
• Reading and plotting curves.

• Associate’s degree in Electrical Power or Electrical Engineering, or 5+ years of hands-on field experience.
• Experience as a Switchgear/High Voltage Technician.
• Proficiency with high voltage test equipment as well as knowledge of low and medium voltage test equipment.
• Proficient computer and phone skills, including Microsoft Office Suite (Word, Excel, Outlook).
• Ability to work a flexible schedule based on client/customer needs.
• Valid driver’s license.
• Effective communication skills.
• Extensive travel; up to 5 days/week with overnights possible.
• On call duty is required approximately six times per year.
• This position is very active and requires standing, walking, bending, stooping, crouching, climbing, crawling, and reaching frequently.
• Aerial work may sometimes be necessary, such as working on ladders or scaffolding.

One Tech Engineering is looking for a Substation Technician for a position located near Neenah, Wisconsin. The Substation Technician will service and test transformers, relays, breakers, switches, and other electrical apparatus/systems at utility substations and industrial facilities.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have an Associate’s degree in Electrical Power or Electrical Engineering, or 5+ years of hands-on field experience.

Local candidates preferred. This is not a remote position.

• Ground grid testing, medium voltage cable testing.
• Troubleshoot and test control circuits, communications systems, protections systems and other electrical apparatus.
• Perform breaker and relay retrofits.
• Ability to read prints and control/protection schemes.
• Complete and submit reports accurately and timely.
• All other duties as assigned by management.
• Applying test procedures for various types of relay test equipment.
• Substation awareness and Safety consciousness.
• Aptitude to quickly learn and apply test procedures for various types of substation equipment.
• Performs testing on low and medium voltage breakers including Megger, Ductor, Hi-Pot, Hi-Current, and Timing tests. 
• Testing on power transformers including Power Factor, TTR, Insulation Resistance, Winding Resistance.
• Completes mechanical work and repairs on breakers including wiring, painting, parts replacement.
• Utilizes and accurately reads meters. 
• Reading and plotting curves.

• Associate’s degree in Electrical Power or Electrical Engineering, or 5+ years of hands-on field experience.
• Experience as a Switchgear/High Voltage Technician.
• Proficiency with high voltage test equipment as well as knowledge of low and medium voltage test equipment.
• Proficient computer and phone skills, including Microsoft Office Suite (Word, Excel, Outlook).
• Ability to work a flexible schedule based on client/customer needs.
• Valid driver’s license.
• Effective communication skills.
• Extensive travel; up to 5 days/week with overnights possible.
• On call duty is required approximately six times per year.
• This position is very active and requires standing, walking, bending, stooping, crouching, climbing, crawling, and reaching frequently.
• Aerial work may sometimes be necessary, such as working on ladders or scaffolding.

One Tech Engineering is looking for a Substation Technician for a position located near Appleton, Wisconsin. The Substation Technician will service and test transformers, relays, breakers, switches, and other electrical apparatus/systems at utility substations and industrial facilities.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have an Associate’s degree in Electrical Power or Electrical Engineering, or 5+ years of hands-on field experience.

Local candidates preferred. This is not a remote position.

• Ground grid testing, medium voltage cable testing.
• Troubleshoot and test control circuits, communications systems, protections systems and other electrical apparatus.
• Perform breaker and relay retrofits.
• Ability to read prints and control/protection schemes.
• Complete and submit reports accurately and timely.
• All other duties as assigned by management.
• Applying test procedures for various types of relay test equipment.
• Substation awareness and Safety consciousness.
• Aptitude to quickly learn and apply test procedures for various types of substation equipment.
• Performs testing on low and medium voltage breakers including Megger, Ductor, Hi-Pot, Hi-Current, and Timing tests. 
• Testing on power transformers including Power Factor, TTR, Insulation Resistance, Winding Resistance.
• Completes mechanical work and repairs on breakers including wiring, painting, parts replacement.
• Utilizes and accurately reads meters. 
• Reading and plotting curves.

• Associate’s degree in Electrical Power or Electrical Engineering, or 5+ years of hands-on field experience.
• Experience as a Switchgear/High Voltage Technician.
• Proficiency with high voltage test equipment as well as knowledge of low and medium voltage test equipment.
• Proficient computer and phone skills, including Microsoft Office Suite (Word, Excel, Outlook).
• Ability to work a flexible schedule based on client/customer needs.
• Valid driver’s license.
• Effective communication skills.
• Extensive travel; up to 5 days/week with overnights possible.
• On call duty is required approximately six times per year.
• This position is very active and requires standing, walking, bending, stooping, crouching, climbing, crawling, and reaching frequently.
• Aerial work may sometimes be necessary, such as working on ladders or scaffolding.

One Tech Engineering is looking for a Substation Technician for a position located near Minneapolis, Minnesota. The Substation Technician will service and test transformers, relays, breakers, switches, and other electrical apparatus/systems at utility substations and industrial facilities.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have an Associate’s degree in Electrical Power or Electrical Engineering, or 5+ years of hands-on field experience.

Local candidates preferred. This is not a remote position.

• Ground grid testing, medium voltage cable testing.
• Troubleshoot and test control circuits, communications systems, protections systems and other electrical apparatus.
• Perform breaker and relay retrofits.
• Ability to read prints and control/protection schemes.
• Complete and submit reports accurately and timely.
• All other duties as assigned by management.
• Applying test procedures for various types of relay test equipment.
• Substation awareness and Safety consciousness.
• Aptitude to quickly learn and apply test procedures for various types of substation equipment.
• Performs testing on low and medium voltage breakers including Megger, Ductor, Hi-Pot, Hi-Current, and Timing tests. 
• Testing on power transformers including Power Factor, TTR, Insulation Resistance, Winding Resistance.
• Completes mechanical work and repairs on breakers including wiring, painting, parts replacement.
• Utilizes and accurately reads meters. 
• Reading and plotting curves.

• Associate’s degree in Electrical Power or Electrical Engineering, or 5+ years of hands-on field experience.
• Experience as a Switchgear/High Voltage Technician.
• Proficiency with high voltage test equipment as well as knowledge of low and medium voltage test equipment.
• Proficient computer and phone skills, to include Microsoft Office Suite (Word, Excel, Outlook).
• Ability to work a flexible schedule based on client/customer needs.
• Valid driver’s license.
• Effective communication skills.
• Extensive travel; up to 5 days/week with overnights possible.
• On call duty is required approximately six times per year.
• This position is very active and requires standing, walking, bending, stooping, crouching, climbing, crawling, and reaching frequently.
• Aerial work may sometimes be necessary, such as working on ladders or scaffolding.

One Tech Engineering is searching for an Electrical Engineer for a position located in Wallingford, Connecticut; Newton, Massachusetts; Conshohocken, Pennsylvania; or Morristown, New Jersey. The Electrical Engineer will responsible for the design of high voltage electrical substations.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a bachelor’s degree in electrical engineering or related degree and 3 years of electrical engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

Electrical Engineer Responsibilities:

• Preparation of proposals and scope development, including conceptual designs and execution plans.
• Prepare engineering cost and labor estimates and schedules.
• Physical substation design including yard layouts, plans, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of material.
• Protection and control design including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiring.
• Preparing calculations and reports for engineering studies. (grounding, lightning protection, AC/DC load studies, etc.)
• Preparing equipment specifications for procurement and/or factory acceptance testing.
• Coordinating design activities with other departments. (Civil/Structural, Networks, Transmission Line, others.)
• Providing guidance and mentoring to less experienced team members.
• Regularly meeting with and corresponding with clients or outside personnel.
• Performing quality reviews for other engineers and designers.
• Providing short-term field support during construction.
• Supporting business development and marketing initiatives.
• Other areas of involvement may include relay settings, 3D/intelligent design, or industry/professional technical committee involvement.
• Performing other duties as assigned.

• Bachelor's Degree in Electrical Engineering or related degree and 3 years of electrical engineering experience.
• Or a Bachelor's Degree in Electrical or related Engineering Technology and successful completion of the Fundamentals of Engineering (FE) exam and 3 years of electrical engineering experience required.
• Consulting experience preferred.
• Strong knowledge in standard engineering techniques and procedures.
• Excellent written and verbal communication skills.
• Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.
• Proficient in standard engineering techniques and procedures.
• Strong computer skills (e.g. Microsoft Office Suite)
• Strong computer skills include AutoCAD, MicroStation, 2D and 3D rendering programs and other analysis programs.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Engineers in Training-EIT Certification preferred.