Program Manager

One Tech Engineering is searching for a Purchaser for a position located in Wallingford, Connecticut, or Newton, Massachusetts. The Purchaser will perform purchasing responsibilities throughout the project life cycle which includes ordering materials, supplies, equipment, and the follow through with venders on shipment and delivery.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Supply Chain Management, Law or Construction-related field and 3 years’ direct purchasing experience.

Local candidates preferred or open to relocation. This is not a remote position.

Purchaser Responsibilities:

• Prepare procurement documents and agreements.
• Perform commercial bid evaluations of supplier proposals and coordinate technical evaluations and recommendations to procurement manager and senior purchaser.
• Prepare purchase order documents and enter purchase order information into online purchasing application.
• Prepare expediting supplier submittals to support detailed design and delivery of equipment and material to support construction.
• Prepare front-end documents including prime agreement flow downs.
• Source and qualify potential suppliers to provide required goods and services.
• Communicate and address procurement issues with appropriate parties, including management.
• Compile procurement and expediting status reports.
• Prepare equipment, materials, and subcontracts forms and reports.
• Compile "Request for Proposal" (RFP) documents including documents/drawings/specifications provided by the internal client.
• Prepare procurement packages to engineering specifications.
• Receive, log, distribute, tabulate, and analyze proposals. Make recommendations for purchasing needs for contracts.
• Responsible for updating Project Procurement Status and Material.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor Degree in Supply Chain Management, Law or Construction related field and 3 years direct purchasing experience.
• Applicable experience may be substituted for the degree requirement.  
• Project purchasing experience preferred.
• Oracle Financial R12 software experience preferred.
• Excellent written and verbal communication skills.
• Excellent interpersonal skills.
• Proficient computer skills (e.g. Microsoft Office Suite)
• Strong attention to detail, facilitation, team building, collaboration, organization and problem solving skills.
• Experience in devising new approaches to purchasing problems encountered.
• CPM Certification or CPSM Certification is preferred.

One Tech Engineering is searching for a Category Manager for a position located in Minneapolis Minnesota. The Category Manager will lead the development and implementation of category strategy to optimize cost and improve operations 

The candidate must be a US citizen or hold a green card. The candidate should have at least 5 years sourcing, purchasing or logistics experience. 

• Applies best practice approaches to multiple critical categories.
• In conjunction with logistics personnel, implements optimal inventory strategies.  
  
• Conducts analyses of supply, demand, market, commodity, supplier, contract and “should cost” modeling to determine category strategies  
  
• Monitors industry information and trends, and supplier risk profiles, to keep category strategy current while supporting business requirements.  
  
• Develops complex sourcing events and qualifies, evaluates and selects suppliers for targeted categories of spend. 
  
• Leads multiple tier I supplier relationship management efforts focused on improving total cost of ownership, quality, delivery and continuous improvement.  
  
• Develops plans with suppliers that support business goals and strategies, and drive continuous improvement and collaboration to bring value to both the company and the supplier.  
  
• Develops performance-based scorecards and monitors, documents and evaluates supplier performance Leads the resolution of disputes with suppliers. 
  
• Leads negotiations to establish contracts that support category strategies while meeting business area requirements.  
  
• Reviews, analyzes, verifies and negotiates contract changes or additional work orders.  
  
• Manage contractor claims to resolution and successfully minimize overall impact to cost and schedule.
• Ensures suppliers comply with contract terms and meet all commitments. 
  
• Applies understanding of underlying principles of contract law to administer all category contract agreements.  
  
• In collaboration with business area management, manages and defines the risk elements of the contract and assembles all necessary documentation for obtaining insurance. 
  
• Limits company liability by ensuring all required documents and notices have been obtained and are satisfactory. 
  
• Creates and manages a project plan for the implementation of category strategy.
• Interacts with business leadership to integrate the sourcing and business project plans.  
  
• Manages the completion of supplier, business and supply chain continuous improvement efforts. 
  
• Creates and manages a project plan for the implementation of category strategy. Interacts with business leadership to integrate the sourcing and business project plans.  
  
• Manages the completion of supplier, business and supply chain continuous improvement efforts.

• Bachelor’s degree in Supply Chain Management, Engineering, Project Management, Business, Finance or related field or equivalent experience.  
  
• 5 years of sourcing, chasing or logistics experience.
  
• 2+ years contract formation knowledge and experience, negotiation and project management skills preferred.  
  
• Certified Professional in Supply Management (CPSM) certification preferred.  
  
• Proficiency in Microsoft® Office suite and significant experience with purchasing and sourcing systems is required.  
  
• Demonstrated customer service skills.  
  
• Strong interpersonal and relationship skills are required.  
  
• Frequently required to attend meetings.

One Tech Engineering is searching for a Freight Forwarding Sales Executive for a position located in Cleveland, Ohio. The Freight Forwarding Sales Executive will be responsible for building strategic partnerships with existing clients and establishing new partnerships with businesses in need of customized logistics solutions.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have around 5-10 years of related sales experience, preferably within the logistics or freight forwarding industry.

• Contact regular and prospective customers to demonstrate products, explain product features, and solicit orders.
• Discover global supply solutions for customers concerning transportation, logistics systems, imports or exports, or customer issues.
• Collaborate with other departments to integrate logistics solutions with business systems or processes, such as customer sales, order management, accounting, or shipping.
• Discover global supply chain solutions utilizing comprehensive logistical or reverse logistical functions for product life cycles, including acquisition, distribution, internal allocation, delivery, recycling, reuse, or final disposal of resources.
• Negotiate with customers to improve supply chain efficiency or sustainability while maximizing PGL margins.
• Analyze the financial impact of proposed logistics changes, such as routing, shipping modes, product volumes or mixes, or carriers with customers.
• Recommend optimal transportation modes, routing, equipment, or frequency for customers.
• Analyze all aspects of customer logistics to determine the most cost-effective or efficient means of transporting products or supplies.
• Communicating with people outside the organization, representing the organization to customers, the public, government, and other external sources. This information can be exchanged in person, in writing, or by telephone or e-mail.
• Consult with clients after sales or contract signings to resolve problems and to provide ongoing support.
• Ensure execution of the developed sales strategies, plans and advertising or promotional programs.
• Confer or consult with department heads to plan advertising services and to secure information on equipment and customer specifications.

Requirements of the Freight Forwarding Sales Executive:

• Bachelor’s Degree preferred.
• 5-10+ years of related experience, preferably in logistics/freight forwarding.
• Strong oral and written communication skills.
• Must be highly detail-oriented with strong organizational skills.

One Tech Engineering is searching for a Construction Manager for a position located in Lubbock, Texas. The Construction Manager will provide on-site management and direct oversight of the safe, cost effective, day to day construction activities for the construction and installation of additional capital assets.

The candidate must be a US citizen or hold a green card. The candidate should have previous experience with the installation and commissioning activities relating to Combustion Turbines & Generators, Black Start Power Plant builds, and supporting systems

• Monitor day to day activities and ensure short- and long-term goals are being met.
• Daily record keeping of activities along with weekly Project reporting.
• Tracking and reporting of delays, extra work or potential extra work performed by contractors.
• Coordination of construction activities with plant operations to ensure plant reliability and operations remain unaffected during all construction phases.
• Monitor and champion construction safety.
•  Provide visible safety leadership through your actions and performance.
• Participate in worksite audits, safety observations, safety investigations and reporting of incidents and near misses, and accidents/injuries/issues.
• Monitor the implantation of disciplinary measure and/or removal of workers for safety violations per established rules and requirements, monitor compliance with OSHA regulations and perform and report safety observations on all contractors performing work on company projects.
• Provide input into the labor resource strategy for the project.
• Assist with in-depth project constructability assessments and reviews.
• Provide support to team members to execute and/or track critical project aspects including schedule, safety, permit compliance, drawing review, execution plan review, commissioning activities, and cost tracking.
• Establish an effective relationship with all stake holders based on teamwork and open honest communication.
• Provide construction consult to project leads and other team members and assist with mentoring and construction knowledge transfer to other members of the team.
• Ensure adequate inspection and/or monitoring of all work to establish compliance with requirements, and to maintain appropriate records in the project files.
• Participate in construction inspections and quality related site activities.
• Establish, monitor, and track processes to ensure regulatory compliance.
• Ability to work with internal & external locate firms to locate underground gas and electric facilities using various types of information including company maps, construction prints and as-built drawings to determine approximate locations of the facilities.
• Utilize various types of electronic locating equipment.
• Assists in the management of all phases of construction, material deliveries and contractors doing business on company property from start-up to project closeout.
• Works as a team member to construct major equipment (Combustion Turbines, Generators, and associated equipment) in accordance with construction documents.
• Assists senior technicians, engineers and designers in the project design, material specifications and procurement.
• Works closely with department personnel and provides support to complete project schedules within the assigned area of responsibility.
  
  

• Minimum of 7 years of experience as an I&E Technician or Construction Manager within a Power Plant environment (Gas Turbines/Generators).
• Proven experience with installation and commissioning activities for Combustion Turbines & Generators, Black Start Power Plant builds, and supporting systems.
• Strong knowledge of all phases of site construction, including scheduling, cost control, quality assurance, and adherence to project scope and specifications.
• Demonstrated ability to manage contractors, coordinate construction activities, and ensure seamless integration with plant operations.
• In-depth understanding of safety practices, including OSHA regulations, with a strong track record of promoting and enforcing safety on job sites.
• Excellent communication and leadership skills.

One Tech Engineering is searching for an Environmental Scientist Assistant for a position located in Kansas City, Missouri. The Electrical Superintendent will be responsible for field operations on assigned project(s) in order to achieve safe, timely and profitable completion of each project.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree and 7 years of construction management experience or craft supervision experience on electrical projects.

Local candidates preferred or open to relocation. This is not a remote position.

• Responsible for the construction scheduling of the electrical-related activities of the subcontractors to confirm the completion of contractual construction activities.
• Maintains continuity of job progress and maximizes efficiencies related to the assigned area
  
• Responsible for the oversight of the following project work activities: raceway, cable tray, electrical panels, ductbank, grounding, switchgear, transformers, low and medium voltage electrical equipment, wiring, motors, heat tracing, instrumentation, instrumentation calibrations, loop checks and point to point checks, and electrical and control testing.
• Responsible for overall supervision of construction effort, which includes: safety, productivity of crafts, efficient use of materials and equipment, materials management, scheduling, engineering, and contractual performance of the project.
• Responsible for subcontractor contractual compliance on designated electrical construction related activities.
• Build effective client and subcontractor relationships. 
• Interface with client representatives, A/E representatives, and other contractors.
• Collaborate with project management to develop and implement project procedures, working documents, and standards.
• Authorize purchase requisitions, field design change requests, etc., under supervision of Construction Manager and Project Manager.
• Responsible for overall project safety. 
  Reviews and audits site specific safety documentation, including Pre-Task Analysis (PTAs) and Task Safety Observations (TSOs) on a regular basis.
• Provide oversight of electrical and instrumentation installation.
  
• Conduct and record related tests and provide oversight for the calibration of instruments.
  
• Complete daily field reports and take daily pictures to document construction progress.
• Assess future work activities and identify any concerns with work plans by utilizing subcontractors 3-week look ahead report.
• Develop a marked-up and as-built set of drawings to produce the record set documents, and answer RFIs with assistance from Assistant Project Manager or Field Engineer.
• Direct and manage subcontractor as necessary to comply with the established project schedule, and track and verify progress on an installed quantity and work hour basis.
• Verify material deliveries meet specifications and are being stored properly, and required preventative maintenance and/or temporary heating is being performed by the subcontractor (this potentially is coordinated with the Materials Manager).
• Coordinate with the QA/QC Manager to verify all welders on site are qualified to weld on the project.
• Witness all equipment setting and alignment.
• Walk down all systems prior to, during, and post hydrostatic testing to verify compliance with drawings and specifications and signing off on completed system testing and restoration.
• Develop punch lists of items out of compliance or not completed.
• Verify the most current drawing revisions are being used in the field.
• Understand and execute the project scope and any changes that develop.
• Ensure field change orders are executed.
• Oversee craft supervision and project staffing as required.
• Provide oversight of project site material and tool management.
• Responsible for the daily field construction of an individual project in accordance with the established policies, procedures, systems, and requirements approved by the company.
  
• Supervises and directs the daily efforts of the physical construction of the project through daily coordination of all field activities, subcontractor direction, and code/specification compliance.
• Read, interpret, and understand isometric drawings, structural drawings, and P&ID's.
• Performs other duties as assigned.
• Complies with all policies and standards.
  

• Bachelor’s Degree and 7 years of construction management experience or craft supervision experience on electrical projects.
  
• Or an Associate’s Degree and 9 years cof onstruction management experience or craft supervision experience on electrical projects.
  
• Or a High School Diploma/GED  and 11 years of construction management experience or craft supervision experience on electrical projects.
  
• Must have excellent communication skills, strong leadership skills, and a strong safety background.
  
• Computer proficiency in Microsoft Suite.
  
• Must be able to meet company's driving requirements

One Tech Engineering is searching for a Project Coordinator for a position located in in Minneapolis, Minnesota; Denver, Colorado; or Amarillo, Texas. The Project Coordinator will be responsible for processing drawings, RFI submittals and project documentation, coordination on all our new build projects within energy supply’s strategic projects group; new wind farms, solar projects, repowers and other major capital projects.

The candidate must be a US citizen or hold a green card. The candidate must have 2-4 years’ experience being or working on a construction job site.

• Performing email correspondence, and utilizing OneNote to track the submittals, manage when the due dates are for information to go back to the suppliers.
• Responsible for staying on top of the drawings; routing to a group of people who have them.
• Will be working away from their desk, getting things off the printer to prepare packages to support the substation and transmission groups.
• Will be in charge of sending project documents to construction sites.
• Gathers, analyzes, translates and delivers information in clear, concise and meaningful formats based on specific project and/or program requirements and according to established project management standards.
• Provides the project manager support and assistance in scheduling, documentation, communication and cost management.
• Updates the project plan.
• Assists in information collection and validations.
• Provides input to project research information.
• Facilitates collaborative documents and data stores.
• Helps prepare status reports and presentations.
• May coordinate the activities of a project sub team and/or project activities to the extent those efforts
• might affect completion of assigned tasks.
  
  

• 2-4 years of experience on a construction job site.
• Experience with RFI’s, correspondence is a nice-to-have.
• Strong organization and coordination skills.
• Excellent oral and written communication skills are required.
• Must have strong knowledge of MS Office.

One Tech Engineering is searching for a Category Manager for a position located in either Minneapolis, Minnesota, or Denver, Colorado. The Category Manager will handle contract negotiations, vendor management, and sourcing for complex technology projects.

The candidate must be a US citizen or hold a green card. The candidate should have 10+ years of IT sourcing/contracting experience.

• Partner with IT stakeholders on transformation initiatives.
• Lead contract negotiations and manage vendor relationships.
• Provide support for ongoing projects with minimal ramp-up time.
• Participate in vendor and client site visits as needed.
• Drives category strategy working with the business for multiple complex, high business impact categories.
• Responsible for the development and effective execution of sourcing strategy for critical categories.
• Plans for and leads competitive sourcing events and other activities in support of category strategies.
• Develops effective negotiation strategies and conducts negotiations with their category suppliers to achieve category and business objectives.
• Manages risk mitigation efforts and oversees on-going monitoring activities.
• Forms and executes contracts with critical suppliers. 

• 10+ years of IT sourcing/contracting experience.
• Experience with SAP contracting and utility-based IT projects.
• Previous utility industry experience is preferred.
• Negotiation and vendor management.
• Customer Information Systems (CIS) background preferred.
• Wind contracts and regulatory knowledge.
• Multi-vendor environment contracting experience is a nice to have.
• Systems integrator services experience is a nice to have.

One Tech Engineering is searching for a Project Coordinator for a position located in either Denver, Colorado, or Minneapolis, Minnesota. The Project Coordinator will be responsible for reconciling backlog work orders and ensuring all necessary actions are completed efficiently.

The candidate must be a US citizen or hold a green card. The candidate should have at least 3 years of related work experience.

• Review and process backlog work orders to ensure accuracy and completion.
• Work through assigned lists, complete tasks, and request additional lists as needed.
• Communicate with coordinators, stakeholders, and team members to resolve issues.
• Track and report progress using Microsoft Excel and other tools.
• Work independently while collaborating with the team as necessary.

• 3+ years of related work experience.
• Experience working in the power or utility industry is a plus.
• Experience with work order management is beneficial.
  
• Proficiency in Microsoft Excel and the Microsoft Office Suite (Outlook, Teams, etc.)
• SAP experience is a nice-to-have.
• Strong attention to detail.
• Ability to work independently while collaborating as needed.

• Responsible for recognizing, monitoring, and making recommendations to correct workplace safety hazards through on-site audits, consulting, ergonomic assessments, and interventions according to OSHA and other regulatory agencies; and collaborating on safety policy development and training. Conduct site safety orientations.
• Participate in Pre-Job Safety Reviews and project planning to ensure successful and safe execution of work tasks.
• Provide coaching to employees on safety practices.
• Conduct a weekly ‘all hands safety meeting’.
• Manage all hot work permitting.
• Oversee all incident investigations.
• Generate all required documentation in SiteDocs.

• At least 5-10+ years of utility safety experience.
• Previous experience working with utility contractors, and site personnel.
• Certified Utilities Safety Professional certification preferred
• Working knowledge of OSHA Compliance.
• Proficient with Microsoft office; Spreadsheets in Excel, Experience with Eco Online.

One Tech Engineering is searching for a Construction Manager for a position located in Seminole, Texas. The Construction Manager will provide on-site management and direct oversight of the safe, cost effective, day to day construction activities for the construction and installation of additional capital assets.

The candidate must be a US citizen or hold a green card. The candidate should have previous experience with the installation and commissioning activities relating to Combustion Turbines & Generators, Black Start Power Plant builds, and supporting systems

• Monitor day to day activities and ensure short- and long-term goals are being met.
• Daily record keeping of activities along with weekly Project reporting.
• Tracking and reporting of delays, extra work or potential extra work performed by contractors.
• Coordination of construction activities with plant operations to ensure plant reliability and operations remain unaffected during all construction phases.
• Monitor and champion construction safety.
•  Provide visible safety leadership through your actions and performance.
• Participate in worksite audits, safety observations, safety investigations and reporting of incidents and near misses, and accidents/injuries/issues.
• Monitor the implantation of disciplinary measure and/or removal of workers for safety violations per established rules and requirements, monitor compliance with OSHA regulations and perform and report safety observations on all contractors performing work on company projects.
• Provide input into the labor resource strategy for the project.
• Assist with in-depth project constructability assessments and reviews.
• Provide support to team members to execute and/or track critical project aspects including schedule, safety, permit compliance, drawing review, execution plan review, commissioning activities, and cost tracking.
• Establish an effective relationship with all stake holders based on teamwork and open honest communication.
• Provide construction consult to project leads and other team members and assist with mentoring and construction knowledge transfer to other members of the team.
• Ensure adequate inspection and/or monitoring of all work to establish compliance with requirements, and to maintain appropriate records in the project files.
• Participate in construction inspections and quality related site activities.
• Establish, monitor, and track processes to ensure regulatory compliance.
• Ability to work with internal & external locate firms to locate underground gas and electric facilities using various types of information including company maps, construction prints and as-built drawings to determine approximate locations of the facilities.
• Utilize various types of electronic locating equipment.
• Assists in the management of all phases of construction, material deliveries and contractors doing business on company property from start-up to project closeout.
• Works as a team member to construct major equipment (Combustion Turbines, Generators, and associated equipment) in accordance with construction documents.
• Assists senior technicians, engineers and designers in the project design, material specifications and procurement.
• Works closely with department personnel and provides support to complete project schedules within assigned area of responsibility.
  
  

• Minimum of 10 years of experience as an I&E Technician or Construction Manager within a Power Plant environment (Gas Turbines/Generators).
• Proven experience with installation and commissioning activities for Combustion Turbines & Generators, Black Start Power Plant builds, and supporting systems.
• Strong knowledge of all phases of site construction, including scheduling, cost control, quality assurance, and adherence to project scope and specifications.
• Demonstrated ability to manage contractors, coordinate construction activities, and ensure seamless integration with plant operations.
• In-depth understanding of safety practices, including OSHA regulations, with a strong track record of promoting and enforcing safety on job sites.
• Excellent communication and leadership skills.

• Perform primary project controls assignments to support Project Managers.
• Accountable for generating reports, assisting with control activities, responding to data requests and developing/maintaining/supporting project schedules and/or detailed cost tracking.
• Coordinates with Project Managers to obtain weekly and monthly cost and schedule updates. This includes project financials, the health of the financials, and the project as a whole by submitting monthly forecasts accruals.
• Assist the Project Managers in providing accurate project forecasting and review of expenditures.
• Attend project meetings.

• 5-7 years of experience with cost accounting within the construction, renewables, or oil and gas industry.
• Strong proficiency in Microsoft Excel.
• Experience in SAP (ECC) is strongly preferred.
• Experience with macros is preferred.
• PMP certification is a nice to have.
• Good communication skills.

One Tech Engineering is searching for a Survey Technician for a position located in Denver, Colorado. The Survey Technician will be responsible for operating AMLD-equipped vehicles to conduct night-time surveys of natural gas systems, ensuring accurate data collection and prompt reporting of any detected gas leaks.

The candidate must be a US citizen or hold a green card. The candidate should have previous experience in a delivery driving role.

• Operate fleet vehicles equipped with Advanced Mobile Leak Detection (AMLD) technology to survey natural gas systems.
• Follow specific maps to ensure complete and accurate coverage of designated survey areas.
• Conduct surveys during nighttime hours to enhance the detection of potential gas leaks.
• Turn on AMLD equipment, drive to assigned areas, and perform the survey as mapped.
• Accurately and thoroughly collect data during each survey run.
• Relay any alarms to the gas dispatch team, who will take appropriate action.
• After completing the survey, return vehicles to the service center.
• Ensure vehicles are properly plugged in and charged at the end of each shift.

• Previous experience in delivery driving jobs, such as those with Amazon, UPS, or USPS.
• Familiarity with the following routes and maps is essential.
• Experience using navigation software like Google Maps or Apple Maps is beneficial.
• Experience using tablets and specific software applications, including Picaro, AMLD leak survey software, and PQ software.
• Familiarity with driving around the Denver metro area is a plus.
• Strong communication skills.
• Must have a valid drivers license.

One Tech Engineering is searching for an Electrical Construction Supervisor for a position located near Kit Carson, Colorado. The Electrical Construction Supervisor will oversee the installation, testing, and commissioning of electrical systems, including power distribution systems, substations, high voltage systems, low voltage systems, and SCADA systems.

The candidate must be a US citizen or hold a green card. The candidate should have 5 to 7 years of electrical experience on wind turbine systems, including experience with power distribution systems, high voltage, low voltage, and substations.

• Perform inspections of electrical systems, including wiring, grounding, switchgear, transformers, and control panels.
• Verify compliance with NEC, IEC, IEEE, and project-specific electrical codes and standards.
• Inspect electrical installations for proper terminations, torque values, insulation resistance, and overall workmanship.
• Review and approve electrical work based on project specifications and quality control procedures.
• Conduct visual and functional inspections of electrical components, ensuring proper energization and operational readiness.
• Witness and document electrical testing, including megger testing, high-potential testing, and functional performance testing.
• Verify electrical grounding and bonding systems meet project requirements.
• Oversee commissioning activities, ensuring proper energization sequences and safe startup procedures.
• Identify and document non-conformances, recommending corrective actions as needed.
• Maintain detailed records of inspections, test results, and corrective actions.
• Prepare daily and weekly reports on inspection findings and status updates.
• Ensure adherence to OSHA, NFPA, and other safety regulations related to electrical systems.
• Collaborate with site engineers, contractors, and safety personnel to resolve compliance issues.
• Work closely with construction teams, project managers, and subcontractors to address electrical issues and provide guidance.
• Support and participate in safety meetings, audits, and risk assessments.
• Assist in reviewing electrical installation drawings, single-line diagrams, and cable schedules for accuracy.

• 5 to 7 years of electrical experience on wind turbine systems, including experience with power distribution systems, high voltage, low voltage, and substations.
• Electrical degree is required.
• Knowledge of OSHA, FERC regulations, and electrical/mechanical codes is required.
• Proficiency in project management tools such as Microsoft Projects and ProjectWise.
• Direct experience with Vestas platforms is preferred.
• Familiarity with Bluebeam is preferred.
• Ability to effectively manage and coordinate activities in the field.
• Strong communication skills.
• Must have a valid driver’s license.

One Tech Engineering is searching for a Geologist Assistant for a position located in Wichita, Kansas. The Geologist Assistant will assist on a variety of environmental based tasks as required by the project including federal, state, local, and commercial clients. The Geologist Assistant will also be responsible for field sampling, investigations, and report writing.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s in Geology or Environmental degree and previous internship or consulting experience.

Local candidates preferred or open to relocation. This is not a remote position.

Geologist Assistant Responsibilities:

• Assist with field related activities including logging soils, air monitoring during investigation and remediation activities, installation of groundwater monitoring wells, collection of soil and groundwater samples for laboratory analysis, and collection of soil for physical testing.
• Assist in assessing soil and groundwater data, developing soil and groundwater sampling plans, data compilation for soil, air and groundwater analytical results.
• Assist with proposal and report writing for environmental based projects.
• Assist in coordinating and scheduling subcontractors for field investigation activities and assisting with site remediation planning and implementation.
• Assist in coordinating laboratory analysis appropriate to the proper identification and evaluation of samples.
• Assist with on-site field monitoring to document compliance with various federal, state, and local permit requirements during project construction.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor’s degree in Geology or related Environmental degree required.
• Prior internship and/or related consulting experience.
• Previous internship experience, including hazardous site assessment experience, such as Phase I, Phase II and remediation preferred.
• Basic knowledge in standard geological techniques, principles and procedures.
• Basic knowledge of the Unified Soil Classification System. glacial deposits, hydrogeology and ground water sampling.
• Basic knowledge of OSHA, CERCLA and remedial design.
• Excellent written & verbal communication skills.
• Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.
• Proficient computer skills (e.g. Microsoft Office Suite).
• Basic knowledge in ArcGIS, RockWare, and Adobe Illustrator preferred.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Demonstrated leadership skills.
• Valid driver's license is required
• OSHA 40-hour HAZWOPER training is preferred.

One Tech Engineering is searching for a Designer who has previous experience with cabinetry design or commercial design experience, for a position located near Lakeville, Minnesota.

The Designer should have prior design experience and knowledge of CAD drafting and designing. This position will work in the commercial industry designing casework, cabinetry, seating, and interiors.

• Uses AutoCad and other software in the design of custom hospitality projects.
• Designs on specific hospitality industry projects as assigned.
• Makes changes to designs to improve upon design after mocked up in the shop.
• Assists in planning meetings making suggestions for interiors for the hospitality industry.
• Works in the Hospitality industry designing casework/cabinetry, seating and interiors.
• Works closely with estimators and shop floor to ensure high quality products.

• Must have a working knowledge of AutoCad.
• 1-3 years of experience required.
• 1-2 years of millwork experience preferred.
• AAS in Drafting or Design.
• Working experience with different types of materials: wood, metal plastics.
• Previous experience in a millshop, woodshop or cabinet shop preferred.