E&C Engineer

One Tech Engineering is searching for a Civil Construction Supervisor for a position located near Seminole, Texas. The Civil Construction Supervisor will oversee and inspect EPC contractor work to ensure compliance with drawings, specifications, and contract requirements.

The candidate must be a US citizen or hold a green card. The candidate should have  7–10 years of experience in Civil Construction oversight.

• Oversight of civil construction activities.
• Perform quality inspections using ArcGIS / Survey123 and inspection templates.
• Verify EPC contractor work meets contract and design requirements.
• Document inspection results and findings in the company systems.
• Participate in daily Plan of the Day (POD) meetings.
• Coordinate inspection readiness with EPC contractor.

• 7–10 years of experience in Civil Construction oversight.
• Strong background in quality control inspections.
• Power plant experience (gas, coal, or similar) strongly preferred.
• Combustion turbine experience a plus, but not required.
• Experience with ArcGIS, Survey123, or Procore preferred.
• Valid driver’s license and ability to pass a criminal background check.

One Tech Engineering is searching for a Designer for a position located in Denver, Colorado. The Designer will support small gas regulation station and regulator station projects

The candidate must be a US citizen or hold a green card. The candidate should have 3 to 5 years of drafting and design experience.

• Conduct site visits to gather field data and support project execution.
• Develop designs from IFR (Issued for Review) through As-Built stages.
• Produce complete drawing packages for each project phase.
• Create 3D models using CADWorx and convert them into fabrication and as-built drawings.
• Coordinate with engineers and project managers to ensure accurate classifications and bills of materials.
• Own projects end-to-end, from initial design through final documentation.
• Perform drafting and design work, including revisions and updates to drawings.
• Collaborate with engineers, operators, and cross-functional teams.
• Manage and maintain project documentation and drawing records.
• Travel to project sites as needed.

• 3–5 years of drafting and design experience
• Utility industry experience strongly preferred
• Proficiency in CADWorx (preferred) or similar drafting software
• Ability to interpret drawings and translate them into real-world field applications
• Understanding of piping specifications and bills of materials.
• Experience with document control and revision management
• Background in geospatial, construction design, P&ID, architectural, or engineering drafting is a plus.
• SAP experience is a plus.

One Tech Engineering is searching for a Structural Engineer for a position located in Pensacola, Florida. The Structural Engineer will support the design, analysis, and inspection of structural systems for buildings, bridges, marine structures, and other infrastructure projects.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree and 1-3 years of related experience in the design of structural systems such as concrete, masonry, steel, wood, cold-formed steel, precast concrete, etc.

• Design and analyze structural systems for various projects, ensuring compliance and regulations.
• Prepare technical reports and documentation to communicate findings and recommendations effectively.
• Communicate with clients, contractors, engineers, and architects.
• Prepare documents, detailed calculations, and specifications for structural systems within the established schedule and budget
• Work closely with current and prospective customers
• Perform construction site visits and field observations.
• Collect field data, perform research and analysis, and prepare field reports
  
  

• Bachelor’s degree in Civil or Structural Engineering from an ABET-accredited program.
• Successful completion of the Fundamentals of Engineering (FE) exam.
• 1-3 years related experience in design of structural systems such as concrete, masonry, steel, wood, cold formed steel, precast concrete, etc.
• Excellent project management skills to oversee multiple projects simultaneously.
• Strong mathematical skills for calculations related to load analysis and structural design.
• Utilize software such as AutoCAD, Civil 3D or other CAD software for drafting purposes.
• Passion for structural engineering innovation and design.
• Self-motivated with a strong work ethic and commitment to success.
• Strong written and verbal communication skills
• Valid Driver’s License, as travel may be required to complete projects

One Tech Engineering is searching for a Middleware Engineer for a position in Omaha, Nebraska. The Middleware Engineer will be responsible for overseeing daily Middleware system administration and partnering with Enterprise Architects and IT teams to manage data integration between internal and cloud applications with company’s middleware (Mulesoft, Axway MFT, Next Axiom, Integration Broker, XAI, SOI, etc.) platforms.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree, preferably in computer science or related field, and 5+ years of software engineering experience with senior-level design capabilities using modern technologies.

Middleware Engineer Responsibilities:

• Responsible for providing administrative support for the AnyPoint Platform and Axway MFT in addition to maintaining the catalog of services built.
• Partner with Enterprise Architects and project teams to translate business requirements into well-designed API solutions that are scalable and global at the core and identify opportunities for reuse.
• Work with Developers and Architects in developing middleware configurations.
• Identify and apply innovative technologies to update existing middleware.
• Coordinate with vendors and support team on problem resolution, design issues, and upgrades.
• Perform troubleshooting, incident responses, and patching promptly.
• Develop and implement standard processes for installation, maintenance, and enhancements of middleware services/components/applications.
• Partner with Quality Assurance and Release Management during testing and deployments of services within the platform.
• Partner with IT teams to maintain and update integrations to support new and existing business objectives and initiatives.
• Create and maintain documentation (system configurations, mapping, processes, service records).
• Conduct performance monitoring and tuning of the middleware platforms.
• Automate manual tasks to increase accuracy and efficiency.
• Research data questions that arise from regular usage of the platform.
• Writing detailed documentation.
• Other duties assigned.
  
  

Requirements of the Middleware Engineer:

• Bachelor's degree, preferably in computer science or a related field, or a combination of education and work experience that provides the necessary skills to perform the essential job functions.
• 5+ years of software engineering experience with senior-level design capabilities using modern technologies.
• 3+ years of experience developing software applications.
• 3+ years of experience with Middleware platforms like Anypoint Platform, Axway MFT, and API Management.
• Strong working experience with Service Oriented Architectures (SOA) and fluency in web services standards and technologies (XML, SOAP, WSDL, XSD, UDDI, REST).
• Strong understanding and working experience using database programming, including JDBC and relational databases like SQL Server or Oracle.
• Strong working experience in Security, Logging, Auditing, Policy Management, and Performance Monitoring and KPI for end-to-end process execution..
• Working experience and strong understanding of Enterprise Integration Patterns, Message Exchange Patterns, and Canonical Model Development.
• Experience working with one or more Source Control Management systems like BitBucket/Git, RTC (IBM Rational Team Concert), Subversion (SVN), or TFS (Team Foundation Server).
• Experience with Java/Groovy.
• Working experience with agile, iterative, and waterfall software delivery and building and/or managing Continuous Integration and Continuous Delivery (CI/CD) pipelines.
• Solid knowledge of personal computer software and hardware, mainly Windows 10, Microsoft Outlook, Microsoft Office product suite, Active Directory, and Exchange.
• Knowledge of QA processes and test-driven development
• Excellent customer service and interpersonal skills are required, including communicating clearly and professionally, both verbally and in writing.
• Must be able to work independently and collaboratively with minimum supervision. Requires exceptional organizational skills, problem-solving skills, and flexibility in changing priorities.
• Be a team player who can share knowledge and develop colleagues for the team and the organization's overall benefit.

• Experience working on large integration projects with large and multi-sourced data sets.
• Working knowledge of server architecture, configuration, and management.
• Familiar with tools and platforms such as SharePoint, Jenkins, Ansible.
• Interest in learning and applying new technologies and concepts

One Tech Engineering is looking for a Distribution Engineer located in Ramsey, Minnesota. The Distribution Engineer will lead project management of new DER’s, coordinating and collaborating with leadership and other departments throughout the process.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s degree in electrical engineering with a power systems emphasis, and 4 years of related experience.

Local candidates preferred. This is not a remote position.

• Regularly monitor utility DERs, including but not limited to solar, storage, and diesel generators, for availability and performance.
• Flag operational issues, communicate issues internally and coordinate with asset owners and operators to resolve. 
• Provide technical advising on residential, commercial, and utility-scale DERs and other Load Management programs to Power Supply and Business Development team and other departments.
• Advise the Technical Support Team (TST) for Power Supply Operations (PSO); this includes supporting pre-event activities, event monitoring and operations, and post-event analysis.
• Participate in the TST on-call rotation, which may require work outside of normal business hours.
• Provide tours and oversee access to utility DERs, including solar and storage sites, coordinating with internal departments and external stakeholders as needed.

• Bachelor’s degree in electrical engineering with a power systems emphasis.
• Four or more years of related work experience.
• Engineer in Training (EIT) Certificate.
• Current and valid driver’s license.
• Professional Engineer (PE) License is a nice-to-have.
• Experience with interconnection and operation of distributed energy assets, such as solar and battery storage, at residential, commercial and/or utility-scale is a nice-to-have.

One Tech Engineering is looking for a Survey Technician for a position located in Duluth, Minnesota. The Survey Technician will support the company’s field surveying marina operations. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a high school diploma and preferably 1-2 years of related marina or field surveying experience. 

• Perform and oversee surveying tasks, including topographic, bathymetric, and as-built surveys.
• Operate, maintain, and troubleshoot advanced survey equipment such as GNSS/GPS, robotic total stations, UAVs, LiDAR, and hydrographic survey equipment such as echosounders, side scans, magnetometers, and ROVs.
• Establish survey control networks and verify field measurements for quality assurance.
• Review field notes, data sets, and field procedures to ensure consistency and accuracy.
• Maintain detailed project documentation, progress reports, and field records.
• Operate boats, barges, and other watercraft during survey missions
• Assist with launching, docking, and securing vessels
• Perform basic maintenance checks before and after fieldwork
• Setup and operate survey instruments
• Assist with field measurements:  shoreline mapping, and bathymetric surveys
• Assist with rigging, mounting, and calibrating sensors on boats or survey platforms
• Follow all boat safety protocols
• Ensure compliance with environmental regulations during field operations
• Work closely with surveyors, engineers, environmental scientists, and boat operators

• High School Diploma
• Associate or Bachelor’s degree in surveying, Engineering Technology, Physics, Civil Engineering, or a related field, a plus
• Boating safety certifications, nice to have
• Strong understanding of survey principles, mapping standards, and construction methods.
  
• Valid driver’s license with a clean driving record; ability to travel to field sites as needed
• Excellent communication skills.

One Tech Engineering is looking for a Land Surveyor located in Superior, Wisconsin. The Land Surveyor will oversee the company’s field surveying operations and manage multiple projects from planning through completion. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have 5 to 10+ years of land surveying experience, including leadership or supervisory roles.

• Lead and supervise field survey crews, providing direction, training, and mentorship.
• Manage team scheduling, staffing, and workload distribution across multiple projects.
  
• Ensure all field staff adhere to safety standards, quality expectations, and project procedures.
  
• Conduct performance reviews and support the development of junior surveyors.
• Perform and oversee advanced surveying tasks, including topographic, bathymetric, and as-built surveys.
• Operate, maintain, and troubleshoot advanced survey equipment such as GNSS/GPS, robotic total stations, UAVs, LiDAR, and hydrographic survey equipment such as echosounders, side scans, magnetometers, and ROVs.
• Establish survey control networks and verify field measurements for quality assurance.
• Review field notes, data sets, and field procedures to ensure consistency and accuracy.
• Manage the full survey project lifecycle: scope development, scheduling, budgeting, coordination, and final deliverables.
• Prepare project proposals, cost estimates, and resource plans.
• Coordinate with engineers, designers, contractors, and clients to communicate project status, requirements, and changes.
• Track project performance metrics and ensure adherence to timelines and budgets.
• Review and approve survey calculations, drawings, and final deliverables.
• Maintain detailed project documentation, progress reports, and field records.

• 5 to 10+ years of land surveying experience, including leadership or supervisory roles.
  
• Associate or Bachelor’s degree in surveying, Engineering Technology, Physics, Civil Engineering, or a related field (preferred).
• THSOA certification or Professional Land Surveyor license, or the ability to obtain, is highly preferred.
  
• Proficiency with surveying equipment and software (Trimble, Hypack, AutoCAD Civil 3D, GIS tools, etc.).
  
• Strong understanding of survey principles, mapping standards, and construction methods.
  
• Valid driver’s license with a clean driving record; ability to travel to field sites as needed.
• Strong leadership, team coordination, and mentoring abilities.
• Excellent communication and client-facing skills.

One Tech Engineering is looking for an Electrical Project Engineer for a position located in Somerset, Wisconsin. The Electrical Project Engineer will be responsible for turning complex engineering plans into tangible results, acting as the technical drivers who ensure projects meet specifications, timelines, and budgets, bridging the gap between project management and the electrical engineering group.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a bachelor’s degree in electrical engineering or a related field, and 4 years of field and project planning experience.

Electrical Project Engineer Responsibilities:

• Preparing, scheduling, coordinating, and monitoring assigned electrical engineering projects.
• Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.
• Interacting with clients, interpreting their needs and requirements, and presenting them to electrical engineering team.
• Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.
• Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.
• Reviewing the engineering tasks and initiating the necessary corrective actions.
• Developing specifications for the project's needed equipment.
• Creating frameworks to measure the project's metrics and data collection.
• Establishing field test methods and methods for monitoring the quality of those tests.
• Ensuring the project's compliance with the applicable codes, practices, policies, performance
• standards, and specifications.
• Conduct all your activities within the guidelines of all company policies, procedures and work rules.
  
  

• A bachelor’s degree in electrical engineering or a related field or equivalent professional experience.
• 4 or more years of field and project planning experience.
• Excellent computer literacy and knowledge of design and visualization software.
• The ability to work with multiple discipline projects.
• Excellent project management skills.
• Excellent organizational, time management, leadership, and decision-making skills.
• Strong written and verbal communication skills.
• Knowledge of applicable codes, policies, standards, and best practices for electrical design.

One Tech Engineering is searching for an Electrical Designer for a position located in Lexington, Kentucky. The Electrical Designer will perform various phases of planning, site evaluations, analytical designs, report preparation, specifications, and preparation of proposal and construction documentation and electrical plans as part of a project team. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in drafting technology or a related field and a minimum of 7 years of related/relevant experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Design various electrical projects including creating electrical schematics, grid plan layouts, electrical power systems, lighting systems, protection and controls, and site and facility design.
• Follow all company, client and project design and drafting standards.
• Plan and develop drawings for production work including problem analysis, design layout and calculations on non-routine assignments of substantial variety and complexity.
• Execute a variety of electrical design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components and refining rough sketches.
• Execute changes to designs or sketches and redlines or mark-ups on ongoing projects.
• Analyze reports, drawings and tests to plan and design projects.
• Interpret and incorporate design codes and specifications related to design requirements.
• Review design drawings for quality assurance within scope, budget and schedule.
• Perform project tasks and assignments within budgeted hours and deadlines.
• Compute volume calculations for conduit/grounding layouts, equipment and panel wiring diagrams and relay panel schematics.
• Organize and maintain all revisions of project drawings, plot files and project-related information are stored in a logical and well-structural manner.
• Responsible for clear and concise written and verbal communications, as it relates to the project client coordination.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor's Degree in drafting technology or related field and a minimum of 7 years related/relevant experience.
• Or an Associate’s Degree and a minimum of 8 years related/relevant experience.
• Or a High School degree and a minimum of 9 years of progressive detailing and design experience is required.
• Advanced understanding of design software such as: AutoCAD, MicroStation, and Excel to develop the design deliverables.
• Ability to learn and effectively utilize new design software programs.
• Advanced ability to utilize both 2D and 3D applications to prepare engineering drawings.
• Advanced knowledge in design, calculations and design systems.
• Advanced knowledge in the theory and practices of assigned discipline; competent in the fundamental concepts of other disciplines as they relate to the assigned discipline; and capable of operating related discipline design software necessary to execute production tasks.
• Ability to work collaboratively with others including, but not limited to Project Managers, Engineers and Designers in a multi-discipline project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
• Excellent written & verbal communication skills.
• Strong analytical and problem-solving skills and attention to detail.

One Tech Engineering is searching for a Transmission Engineer for a position located in either Charlotte, North Carolina, or Atlanta, Georgia. The Transmission Engineer will manage and perform responsibilities for transmission line design.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in Engineering and at least 3 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

Transmission Engineer Responsibilities:

• Perform, lead, and oversee all engineering responsibilities related to overhead transmission line design. This includes PLS-CADD modeling, line routing, structure analysis and loading trees, developing design criteria, sag-tension calculations, wire blowout, swing angle, damper recommendations, structure spotting, clearance reports, wire selection, etc.
• Prepare specifications for construction, hardware, and material for high voltage overhead transmission line (HV OH T-Line); structure design and development; hardware design and selection; and field installation supervision.
• Prepare construction drawings and cost estimates for high-voltage overhead transmission lines.
• Additional responsibilities include providing instruction and guidance to less experienced staff members.
• Other duties as assigned.

• Bachelor's degree in Engineering from an accredited program is required.
• A professional certification, EIT, and/or a professional engineer licensure is strongly desired.
• Minimum 3 years of related experience with routing and design of high voltage overhead transmission line facilities.
• Excellent written & verbal communication skills.
• Ability to work in a team environment and possess strong analytical and problem-solving skills is required.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Experience in 69kV to 500kV line design and working knowledge and/or expertise in Power Line system-based programs (i.e., PLS, PLS-CADD, PLS-POLE, etc.) preferred.
• Strong computer skills (e.g. Microsoft Office Suite).