Land Surveyor

One Tech Engineering is searching for a Structural Engineer for a position located near Menomonie, Wisconsin. The Structural Engineer will support multi-year hydroelectric facility projects, including dam reconstruction and upgrades.

The candidate must be a US citizen or hold a green card. The candidate should have 5–7 years of structural engineering experience.

• Lead and oversee heavy structural steel and reinforced concrete work, including staged in-water installations.
• Coordinate with and ensure compliance on projects regulated by the Federal Energy Regulatory Commission (FERC).
• Serve as the on-site technical liaison, resolving field issues and ensuring construction quality and adherence to design specifications.
  
  

• Bachelor’s degree in Structural Engineering (or related field).
• 5–7 years of structural engineering experience.
• Strong experience in heavy structural engineering, including concrete and steel design and construction.
• Proficient in Microsoft Office, with extensive experience using SharePoint.
• Ability to open and review native CAD files (MicroStation preferred).
• Valid driver’s license and reliable transportation.
• Previous experience working with hydroelectric facilities, dams, or in-water construction projects.
• Experience with FERC-regulated projects preferred.
• Professional Engineer (PE) or Engineer-in-Training (FE) certification is a plus.

One Tech Engineering is looking for an Electrical Project Engineer for a position located in Somerset, Wisconsin. The Electrical Project Engineer will be responsible for turning complex engineering plans into tangible results, acting as the technical drivers who ensure projects meet specifications, timelines, and budgets, bridging the gap between project management and the electrical engineering group.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a bachelor’s degree in electrical engineering or a related field, and 4 years of field and project planning experience.

Electrical Project Engineer Responsibilities:

• Preparing, scheduling, coordinating, and monitoring assigned electrical engineering projects.
• Formulating project parameters and assigning responsibilities to the most capable employees and monitoring the project team.
• Interacting with clients, interpreting their needs and requirements, and presenting them to electrical engineering team.
• Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.
• Cooperating and communicating with the project manager and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.
• Reviewing the engineering tasks and initiating the necessary corrective actions.
• Developing specifications for the project's needed equipment.
• Creating frameworks to measure the project's metrics and data collection.
• Establishing field test methods and methods for monitoring the quality of those tests.
• Ensuring the project's compliance with the applicable codes, practices, policies, performance
• standards, and specifications.
• Conduct all your activities within the guidelines of all company policies, procedures and work rules.
  
  

• A bachelor’s degree in electrical engineering or a related field or equivalent professional experience.
• 4 or more years of field and project planning experience.
• Excellent computer literacy and knowledge of design and visualization software.
• The ability to work with multiple discipline projects.
• Excellent project management skills.
• Excellent organizational, time management, leadership, and decision-making skills.
• Strong written and verbal communication skills.
• Knowledge of applicable codes, policies, standards, and best practices for electrical design.

One Tech Engineering is searching for a Program Project Manager for a position located in Englewood, Colorado. The Program Project Manager will develop a multi-year capital expenditure plan to support the client’s replacement and betterment of electric transmission and distribution assets.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Construction, Construction Management, Engineering, or a related field and 7 years of relevant program management experience in the construction industry.

Local candidates preferred or open to relocation. This is not a remote position.

• Regular interface and coordination with project sponsor organizations to determine details of proposed plans and business justification.
• Ensure synergies across projects are incorporated into the portfolio of work to prevent scope from being duplicated or performed inefficiently.
• Monitor composition of client’s capital investment allocation to align with stated subsidiary investment targets for optimal rate of return.
• Engage with project sponsors to evaluate need-by date for realistic schedules and budgets.
• Assist with creation and compilation of rate filing support for federal and state filings.
• Review tabletop engineering estimates for accuracy and scope.
• Review project change requests (scope, In-service date, etc.) and reconcile with the existing and long-range portfolio of work.
• Interface with client’s accounting group to establish financial setup for projects.
• Create analyses & reports to assist the client in tracking, coordination, and execution of projects.
• Build baseline scopes, schedules, and budgets to be released to multiple client’s stakeholders.

• Bachelor’s Degree in Construction, Construction Management, Engineering, or a related field and 7 years of relevant program management experience in the construction industry.
• Applicable experience may be substituted for the degree requirement.   
• Excellent computer skills and proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint and Access).
• Experience with document control, scheduling, cost control and project management software is preferred.
• Excellent written and verbal communication skills and strong organizational skills.
• Strong analytical and problem-solving skills, and attention to detail.
• Ability to handle large volumes of work and multi-task in a fast-paced environment.
• Multiple years of experience on construction project sites or executing program management in the industries of aviation, commercial, energy, government, manufacturing, oil & gas, process, transportation, transmission & distribution, or water is preferred.
• A basic understanding of Generally Accepted Accounting Principles is required.
• Must be able to meet the company's driving requirements.

The candidate must be a US citizen or hold a green card. The candidate should have a Bachelor’s degree in Electrical Engineering and at least 2 years of related engineering experience.

• Provide technical and analytical support for the construction, operation, and maintenance of distribution and transmission assets.
• Assist with project management for system construction and improvement projects.
• Assist with development of short- and long-range distribution system planning studies, system reports, fault current protection and fuse coordination studies, power quality studies, and load growth studies.
• Maintain current engineering planning studies, reports, substation drawings, and documentation of substations and other utility facilities.
• Identify, collect, analyze, and interpret data sets from AMI technology to identify trends, recommend process improvements, and solve problems.
• Manage and track all reliability statistics and file-related reports.
• Coordinate work with developers, contractors, customers, and staff.
• Maintain GIS mapping systems for electric and water departments, including GPS/GIS data collection, integration, and system modeling of the distribution system.
• Support the operation and maintenance of distribution system equipment and infrastructure.
• Maintain the Outage Management System (OMS), train personnel in system operation, assist with accurate outage record-keeping, and review outage records to support system reliability planning.
• Assist with outage management activities via SCADA, OMS, and AMI systems.
• Assist with the overall design and planning of electrical distribution system facilities.
• Assist with the design and staking of system improvements, upgrades, modifications, new line extensions, and pole replacements.
• Prepare cost estimates for overhead and underground construction, maintenance, and system improvement projects.

• Bachelor’s degree in Electrical Engineering and atleast 2 years of related engineering experience.
• Knowledge of electrical distribution system design, operation, substations, and GIS.
• Experience with data analytics.
• Proficient with various computer programs (MS Word, Excel, PowerPoint, etc.).
• Professional Engineer (PE) license or ability to obtain.
• Ability to make decisions within policy and position parameters.
• Ability to manage multiple projects and meet deadlines.
• Strong communication skills.
• Must have a valid driver's license.

• SEL acSELerator software experience.
• Utility-related ESRI software experience.
• OSI SCADA/SEL HMI software experience.
• NISC software experience.
• NERC compliance experience.
• AutoCAD and/or ArcView software experience.
• Knowledge or experience with distributed energy resources.

One Tech Engineering is searching for a Transmission Engineer for a position located in either Charlotte, North Carolina, or Atlanta, Georgia. The Transmission Engineer will manage and perform responsibilities for transmission line design.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in Engineering and at least 3 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

Transmission Engineer Responsibilities:

• Perform, lead, and oversee all engineering responsibilities related to overhead transmission line design. This includes PLS-CADD modeling, line routing, structure analysis and loading trees, developing design criteria, sag-tension calculations, wire blowout, swing angle, damper recommendations, structure spotting, clearance reports, wire selection, etc.
• Prepare specifications for construction, hardware, and material for high voltage overhead transmission line (HV OH T-Line); structure design and development; hardware design and selection; and field installation supervision.
• Prepare construction drawings and cost estimates for high-voltage overhead transmission lines.
• Additional responsibilities include providing instruction and guidance to less experienced staff members.
• Other duties as assigned.

• Bachelor's degree in Engineering from an accredited program is required.
• A professional certification, EIT, and/or a professional engineer licensure is strongly desired.
• Minimum 3 years of related experience with routing and design of high voltage overhead transmission line facilities.
• Excellent written & verbal communication skills.
• Ability to work in a team environment and possess strong analytical and problem-solving skills is required.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Experience in 69kV to 500kV line design and working knowledge and/or expertise in Power Line system-based programs (i.e., PLS, PLS-CADD, PLS-POLE, etc.) preferred.
• Strong computer skills (e.g. Microsoft Office Suite).

One Tech Engineering is looking for a Field Service Technician for a position located near Minneapolis, Minnesota. The Field Service Technician will be responsible for setting up equipment and train machine operators employed by municipalities.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have experience as a traveling Field Service Technician, with a focus on industrial mechanical systems in a manufacturing facility.

Field Service Technician Responsibilities:

• Travel to customer sites to install, maintain, and repair large industrial mechanical equipment and pumps throughout your assigned territory.
• Diagnose and resolve mechanical issues efficiently to minimize downtime and ensure optimal functionality.
• Perform routine maintenance tasks to prevent equipment failures and extend the lifespan of machinery.
• Establish and maintain positive relationships with customers, providing excellent customer service and addressing inquiries or concerns.
• Provide remote technical support when not on-site, assisting customers with troubleshooting and issue resolution.
• Maintain accurate records of service activities, including service reports, equipment logs, and customer communication.
• Conduct training sessions for customers on the proper operation and maintenance of equipment.
• Embrace the responsibility of frequent travel, adapt to different environments, and maintain a strong sense of responsibility and accountability.

• Proven experience as a traveling Field Service Technician, with a focus on industrial mechanical systems in a manufacturing facility.
• Technical degree or certification in mechanical engineering or a related field is a plus.
• Strong mechanical aptitude and troubleshooting skills.
• Must be able to bend/lift/squat/move 50+pounds.
• Work in all weather conditions.
• Ability to interpret technical manuals and schematics.
• Excellent customer service and communication skills.
• Willingness to travel extensively and work independently.
• Valid driver's license, clean driving record, and proof of insurance.
• Background and fitness for duty check is required.

One Tech Engineering is searching for a Mechatronics Engineer for a position located in Vadnais Heights, Minnesota. The Mechatronics Engineer will perform design and development functions for existing product lines and product line extensions, new products, or specials.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship The candidate should have a Bachelor’s degree in mechanical engineering, Electrical Engineering or Mechatronics.

• Works on designs to improve components and products and to develop concepts for new products that achieve the desired quality at the most favorable cost.
• Prepares or directs the preparation of layouts, drawings, and specifications.
• Defines tests to be conducted and evaluates test results.
• Recommends or develops design changes.

Requirements of the Mechatronics Engineer:

• Bachelor’s Degree in Mechanical Engineering, Electrical Engineering or Mechatronics, with 1 - 10 years of varied experience in engineering.  
• Must have strong CAD knowledge, proficient computer skills, strong analytical and diagnostic abilities, and knowledge of engineering standards.  
• Must also have effective interpersonal and communication skills, including a team orientation.

One Tech Engineering is looking for a Senior Project Manager for a position located in Stillwater, Minnesota. The Senior Project Manager will be responsible for managing all deliverables throughout the project’s life cycle and for ensuring the customer and internal stakeholders receive the required deliverables necessary to meet the project’s timeline/cost/scope of supply.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have 4+ years of project management experience.

Senior Project Manager Responsibilities:

• Leads and creates the project planning efforts; including the formulation of project scope, definition of project deliverables, required delivery dates, creation of a logical work breakdown structure, definition of major project milestones, accumulation of project costs and benefit estimates.
• Ensure a forecast is created for all projects that align to the budget and weekly financial status reports are constructed with complete analysis/reconciliation.
• Work with team members to improve variances that would impact the budget.
• Inform Leadership of all variances.
• Develop and approve an effective plan for communicating project information to the project team and stakeholders.
• Creates status reports, determines project status codes if necessary and creates project review documents for senior management.
• Collects and documents project issues and manages timely resolution.
• Manage a team of Engineering Professionals to ensure all are performing required project design/fabrication/release details as necessary.
• Work with Purchasing/Production/Test/QC personnel to guarantee required workload is completed within project constraints and timelines.
• At the completion of a project, capture lessons learned and communicate findings to team.
• Ensure lessons learned are effectively applied to subsequent projects.

Requirements of the Senior Project Manager:

• Bachelor’s degree or equivalent in Mechanical Engineering or Construction Management.
• 4-10 years of experience in Project Management.
• Experience managing technical projects.
• Experience using MS Project and MS Office tools.
• Previous SAP and/or ERP experience.
• PMP Certification preferred.
• Highly analytical mind with exceptional problem-solving skills and attention to detail.
• Strong communication skills.

One Tech Engineering is searching for a Distribution Project Manager for a position located in either Reading, Pennsylvania, or Morristown, New Jersey. The Distribution Project Manager will oversee cost control, timely project completion, and maintain strong relationships with the Owner, subcontractors, regulators, and other stakeholders.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a minimum of 5 years of Distribution line or substation construction project management experience.

Local candidates preferred or open to relocation. This is not a remote position.

Distribution Project Manager Responsibilities:

• Vet the initial scope received and develop a project work plan with Engineering & Client Stakeholders.
• Develop outage requests and sequenced work plans with SME’s & Client contractor partners.
• Work with Engineering to facilitate major and minor material equipment procurement.
• Coordinate environmental and non-environmental permitting review and submittal 
• Develop RFP packages for construction bid events, including written scopes of work, baseline schedules, and permitting packages.
• Evaluate contractor bids and recommend award to Client.
• Facilitate Pre-Construction and regular progress meetings.
• Drive schedule and project progress during construction, oftentimes on-site.
• Complete pre-energization & closeout activities during project completion.
• Develop rapport with construction team through on-site meetings and regular meetings/phone calls.
• Meet regularly with Scheduler to update & maintain detailed P6 project schedules.
• Maintain and be accountable for project budget and financial forecast updates.
• Update financial forecasts and track accruals monthly.
• Navigate client computer programs for financial updates, contract management, and project documentation.
• Report regularly to the Lead Project Manager and Client on construction progress, cost and schedule metrics, procurement issues, safety or environmental concerns, design questions, potential impacts, and any issues requiring home office support.
• Maintain clear lines of communication and relationships between project site, project office and clients.

• Bachelor's degree in engineering, construction management or related field from an accredited curriculum.
• Minimum of five (5) years of Distribution line or substation construction project management experience, including management of cost and schedule.
• Must have detailed knowledge in substations, networks/telecommunications, or transmission lines. Must have ability to deal effectively with a wide variety of industry, government and public contacts on project-related matters.
• Excellent written & verbal communication skills.
• Strong analytical and problem solving skills.
• Project Management Professional (PMP) certification is a plus.
• Valid driver's license required.
• Must meet standards to qualify for and maintain the Company's vehicle driving privileges as outlined in the Company's Motor Vehicle Safety Policy.