E&C Engineer

One Tech Engineering is searching for a Technician for a position located in Denver, Colorado. The Technician will support the Communications and Control Engineering Group primarily as a field resource responsible for checking settings, communications, and controllers or distribution devices.

The candidate must be a US citizen or hold a green card. The candidate should have 2+ years of experience in communications, IT, or electrical troubleshooting

• Verify and maintain settings, communications, and controllers for distribution devices, including battery storage systems.
• Perform program verification, troubleshooting, and database maintenance for communication and control equipment.
• Travel from the designated service center to assigned field locations to perform updates, resolve issues, and support engineers remotely.
• Document field activities, findings, and resolutions to ensure accurate project tracking and reporting.

• 2+ years of experience in communications, IT, or electrical troubleshooting (including telecom, network support, or panel wiring backgrounds).
• Basic understanding of electrical or distribution systems.
• Prior experience with utilities or telecom installations is nice to have.
• Familiarity with reclosers or capacitor banks is preferred.
• Network configuration experience is nice to have.
• Knowledge of networking (firewalls, connectivity, Ethernet).
• Experience with database updates and maintenance.
• Proficiency in Microsoft Office (Excel, Access preferred).
• Strong communication, teamwork, and troubleshooting skills.
• Ability to work independently in field environments.

One Tech Engineering is searching for a Senior Estimator for a position located in Kansas City, Missouri. The Senior Estimator will be responsible for leading Construction Design-Build and EPC estimates and proposals for various projects with a diverse portfolio of project types and clients.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Engineering, Construction Management or related field and 7 years of direct project estimating experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Lead estimating strategy and implementation efforts.
• Review and approve project summary schedules for validity.
• Manage workload scheduling to ensure timely completion of deliverables.
• Lead risk review process.
• Responsible for compliance with estimating methodology insuring quality estimates are produced.
• Lead project team review for estimating quantities and scope of project.
• Responsible for reviewing and approving quotes on bonds and insurance.
• Review and approve small and disadvantaged business solicitation and evaluations.
• Lead subcontractor solicitation and pre-qualification reviews.
• Responsible for reviewing and approving specialty and standard equipment pricing.
• Review and verify subcontractor bid packages before being transmitted for quotes.
• Present the estimate to internal and external clients.
• Responsible for the review of final estimate before management review and proposal presentation.
• Lead estimating teams for completion of pre-construction services.
• Responsible for cost history, data base management and estimating process.
• Approve price general conditions, indirect costs and review as provided by project management team.
• Make final recommendations as to fee, contingency and escalation.
• Provide man hour quotes for required estimating effort.
• Develop strategy on contract partnering agreements.
• Prepare and present estimating data for risk review process.
• Verify and approve estimates for joint venture reviews.
• Review commercial terms and conditions and address risk issues.
• Review and validate value engineering items, alternates and options.
• Responsible for the accuracy and validity of estimate clarifications and assumptions.
• Review documents for gaps and overlaps in scope of work.
• Train and mentor staff.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor’s Degree in Engineering, Construction Management or related field and 7 years of direct project estimating experience.
  
• Applicable experience may be substituted for the degree requirement.
  
• Ability to work independently or in groups, think creatively and analytically, and make quick and sound decisions
  
• Excellent written and verbal communication skills
  
• Expert with Microsoft Office, ConEst and K-base.
  
• OSHA 10-hour certification.

One Tech Engineering is searching for a Project Coordinator for a position located in Arvada, Colorado. The Project Coordinator will manage high-volume, repetitive billing tasks on a daily basis with accuracy and efficiency

The candidate must be a US citizen or hold a green card. The candidate should have a few years of customer service or customer-facing experience.

• Utilize Microsoft Excel (including advanced functions) and Microsoft 365 Office applications to support billing and reporting tasks.
• Process and track work orders and purchase orders (POs) using SAP.
• Maintain consistent communication and follow-up with Project Managers (PMs) to ensure timely updates and issue resolution.
• Participate in weekly vendor meetings to coordinate activities and address concerns.
• Investigate and resolve discrepancies related to work orders and purchase orders.
• Collaborate regularly with job runners, PMs, and fellow coordinators to ensure smooth operations.
• Drive resolution of PO and work order issues through proactive research and communication.

• Previous customer service or customer-facing experience.
  
• Experience working with work orders and purchase orders.
• SAP experience is preferred.
• Proficient in Microsoft Office 365, with a strong emphasis on Excel.
  
• Strong communication skills.
  
• Excellent organizational skills.
• Familiarity with Power BI within Microsoft is nice to have.

One Tech Engineering is searching for a Project Manager for a position located in Appleton, Wisconsin. The Project Manager will plan, direct, and coordinate activities of designated project(s) to ensure that goals or objectives of project(s) are accomplished within prescribed time frame and funding parameters by performing the following duties personally or through subordinate supervisors.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s degree (B.A.), or ten (10) years of related experience, or an equivalent combination of education and experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Process incoming bid requests from client with assistance from the business development and estimating departments.
• Review and prepare estimates based off labor calculations, material pricing and subcontracts.
• Review estimating department proposals prior to client submission.
• Reviews project proposals or plans to determine time frame, funding limitations, and procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project.
• Collaborates with project controls to establish budgets.
• Assembles kick-off meeting to inform all departments involved in the schedule.
• Establishes work plan and staffing for each phase of the project and establishes a schedule.
• Prepares information for vendor subcontracts and coordinates material purchase orders with material procurement. This would involve creating purchase requisitions as well.
• Confers with project staff to outline work plan and to assign duties, responsibilities, and scope of authority with the project team.
• Directs and coordinates activities of project personnel to ensure project progresses on schedule and within the prescribed budget.
• Reviews status reports and modifies schedules or plans as required.
• Prepares project reports for management, the client, or others.
• Confers with project personnel to provide technical advice and to resolve problems.
• Coordinates project activities with the activities of government regulatory or other governmental agencies.
• Coordinates timely shipments to meet customers’ schedules.
• Responsible for timely change management and contract changes.
• Resolves any outstanding issues to ensure prompt payments.
• Prepares and completes job close-out and evaluates best practices for continuous improvement.

• Bachelor’s degree (B.A.) from a four-year college or university, or ten (10) years related experience or equivalent combination of education and experience.
• Experience with piping or structural design platforms, including SpoolFab or Tekla/Tekla EPM, is desired.
• Experience with ASME and/or AISC fabrication quality programs.
• Knowledge of MS Office, and be proficient in Excel and Word.
• Must have excellent written and verbal communication skills.
• Organized, detail-oriented, and very thorough.

One Tech Engineering is searching for a Transmission Department Manager for a position located in either Atlanta, Georgia; Chattanooga, Tennessee; or Charlotte, North Carolina. The Transmission Department Manager will lead and develop a high-performing team of engineers and designers through effective recruitment, mentoring, coaching, and performance management.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have at least 7 years of consulting experience in transmission and distribution, with a focus on engineering design or project management

Local candidates preferred or open to relocation. This is not a remote position.

Transmission Department Manager Responsibilities:

• Collaborate with HR and Recruiting to attract top talent and oversee onboarding for all assigned staff (including interns, new graduates, transfers, and contract conversions).
• Guide employees in identifying and pursuing career paths within the T&D organization.
• Conduct annual performance reviews and create development plans as required.
• Identify training needs and implement targeted training programs in collaboration with T&D leadership.
• Champion a positive and inclusive culture rooted in safety, ownership, innovation, and teamwork.
• Serve as a senior technical advisor on transmission projects across the region and for our international teams.
• Monitor team performance on project execution and take corrective actions as needed to meet quality, schedule, and budget targets.
• Drive adoption of innovative tools, technologies, and workflows to enhance engineering efficiency and outcomes.
• Support proposal development and QA/QC efforts for key projects.
• Collaborate with regional and India leadership to align project staffing, resource planning, and technical direction.
• Contribute to the formulation and execution of the region’s strategic business plan, including SWOT analysis and vision development.
• Partner with Marketing, Account Management and Business Development teams to pursue new business, develop proposals, and support sales strategies.
• Participate in trade shows, conferences, and thought leadership to promote the firm’s capabilities.
• Promote diversity, innovation, and process improvement initiatives across the department.
• Coordinate with other regional and national leaders to share best practices and support company global objectives.
• Facilitate alignment across T&D offices on standards, tools, and key initiatives.
• Support efforts to integrate global engineering resources and ensure consistent delivery.
• Assist in resource coordination and work assignment to ensure optimal project staffing.
• Ensure compliance with T&D Quality Management System and support internal QA/QC processes.
• Lead continuous improvement efforts to increase efficiency and consistency in project delivery.
• Provide input into selection and implementation of project management systems.
• Support development of specialized market offerings, including EPC and program management solutions.

• Bachelor’s degree in engineering, construction, or a related field from an accredited program.
  
• Minimum 7 years of consulting experience in transmission and distribution, with a focus on engineering design or project management.
  
• Proven leadership or supervisory experience in an engineering or technical environment.
  
• Experience in team mentoring and performance development.
  
• Strong communication, collaboration, and facilitation skills.
  
• Demonstrated knowledge of project management tools and methodologies.
  
• Record of financial success in project delivery.

• 10+ years of industry experience.
  
• Licensed Professional Engineer (PE) and/or Project Management Professional (PMP).
  
• Experience working with EcoSys, Microsoft Project, PowerBI, and similar tools.
  
• Experience in business development, including proposal writing and client engagement.
  
• Prior experience in a multi-office, matrixed organizational structure.

• Managing project metrics, including monitoring inactive and missing completes reports, while working closely with project leads to resolve issues, submit extensions, and complete project closeouts.
• Handling SAP-related tasks such as generating WBS elements, and addressing unique project challenges with attention to detail in collaboration with finance, accounting, and supply chain teams.
• Perform primary project controls assignments to support Project Managers.
• Accountable for generating reports, assisting with control activities, responding to data requests and supporting various Metric Reporting resolution.
• Coordinates with Project Managers to obtain necessary information to assist with completing tasks.

• At least 1 year of project support experience.
• College degree preferred.
• Must be proficient with MS Office, Excel (pivot tables), Outlook, Teams, etc., meeting set up, etc.
• SAP and MDO experience are nice to have.
• Power Plan experience would also be nice to have.
• Must poses root cause analysis, critical thinking/analysis skills which includes taking initiative to ask questions to figure things out.
• Must have strong communication skills.
  

One Tech Engineering is searching for a Proposal Strategist for a position located in Chesapeake, Virginia. The Proposal Strategist will be responsible for developing the proposal plan; the Request For Proposal (RFP) release and the process including end game, and checkmate for assigned business development proposals to win work for the company.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in marketing, communications, business administration, or a related field and 4 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

Proposal Strategist Responsibilities:

• Conduct proposal development efforts in collaboration with business development and project management leadership to develop distinctive value propositions that enhance our clients' competitive positions.
• Develop proposal plan, draft storyboards, develop proposal and win strategy, proposal team assignments, and initial proposal management plan.
• Perform pink team review and adjust marketing materials in response to review and requests.
• Conduct review of the go/no-go decision, official proposal kickoff meeting, and the development of graphics and visuals.
• Perform post-submittal activities including, interview in the checkmate phase.
• Develop a negotiated contract outline and deliver proposal services per the checkmate phase.
• Support the development of metrics; including change orders, safety, budget, schedule, diversity goals, and community involvement activities.
• Assist with the closing of the project deliverables.
• Assist with the submittal for industry awards (ACEC; ENR) local trade or national trade publications.
• Attends professional associations, conferences, and build professional network and trade shows.
• Set up and prepare the booth.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor’s Degree in marketing, communications, business administration, or related field and 4 years in marketing, business development, or sales with a professional services firm.
• Applicable years of experience may be substituted for the degree requirement.
• Experience at an A/E firm preferred.
• Excellent written & verbal communication skills.
• Proficiency with Adobe InDesign strongly preferred.
• Certified Proposal Management Professional APMP is preferred.

One Tech Engineering is searching for an E&C Engineer for a position located in Earth, Texas. The E&C Engineer will provide civil engineering expertise, focusing on evaluting project drawings and handling Request for Information (RFIs) across multiple projects. 

The candidate must be a US citizen or hold a green card. The candidate should have 9+ years of civil engineering experience with 2-3 years specifically in the renewable generation project space.

• Collaborate with engineers and project stakeholders to clearly outline requirements for submittals and RFIs.
• Evaluate drawings, studies, and analyses to verify alignment with project specifications and requirements.
• Review technical documentation and communicate variances from company master specifications internally for approval.
• Provide on-site support during construction by assisting team members with civil engineering-related questions.
• Clarify design or construction process details and troubleshoot issues arising on-site.
• Manage planning, reviewing, and direct support activities throughout the construction phases.
• Resolve RFIs and non-conformance requests effectively and in a timely manner.
• Interpret and understand design drawings to ensure construction compliance with design specifications.
• Manage RFI requests and maintain adherence to design and regulatory requirements.
• Support a multifunctional group including internal business units and external stakeholders.
• Coordinate with internal departments such as Facility Operations, Siting and Land Rights, and Environmental Teams.
• Collaborate with external entities including County and State Agencies, and the Federal Energy Regulatory Commission (FERC).
• Assist in obtaining necessary local and state permits for large construction projects.
• Work closely with EPC contractors, project managers, construction field teams, construction managers, and construction/civil inspectors.
• Coordinate with Project Controls staff regarding cost and scheduling.

• 9+ years of civil engineering experience with 2-3 years specifically in the renewable generation project space (construction or engineering design)
• Experience working with utilities or design firms on renewable technologies
• Bachelor’s degree from an ABET accredited school or strong/commensurate experience.
• Knowledge of/familiarity with NCRs, RFIs, and the ability to understand and manage the scope of a contract.
• Strong written and verbal communication skills along with strong analytical skills.
• Professional Engineering license, or Engineering in Training/certification is strongly preferred.

One Tech Engineering is searching for a Senior Automation and Controls Engineer for a position located in Kansas City, Missouri. The Senior Automation and Controls Engineer will be responsible for executing automation and controls deliverables for project(s) in the front end, detailed design, construction, and start-up phases

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Controls, Electrical, Mechanical, or Chemical Engineering, or a related degree, successful completion of the Fundamentals of Engineering (FE) exam, and 7 years of experience in electrical engineering.

Local candidates preferred or open to relocation. This is not a remote position.

Senior Automation and Controls Engineer Responsibilities:

• Responsible for compliance with company and project site safety policies.
• Design responsibility for all Automation and Controls scope on the project.
• Leads a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design. 
• Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines.
• Responsible for leading and developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization. 
• Responsible for commissioning and startup of those design deliverables.
• Lead and prepare controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details.
• Lead the specification, design, and procurement activities for control panel and equipment vendors, manage vendor progression, and lead the Factory Acceptance Tests (FATs).
• Lead and prepare electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules.
• Determine process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves. Utilize knowledge of various technologies for selecting the appropriate controls application.
• Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project.
• Develop and manage verification of design, calculations, project studies and report preparation.
• Interfaces directly with offsite design office and coordinates and tracks execution of controls deliverables to that office.
• Responsible for leading and performing quality reviews of project design submittals and coordinating those reviews within the department.
• Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry.
• Interfaces directly with construction personnel in development of contracts and execution of work.
• Develops project estimates at each project phase through various software such as Proposal works, Integrated Architecture Builder (IAB), SIL Solver, Bluebeam, Excel, and Visio.
• Supports project manager in the development and tracking of automation and controls project budgets and expected progress.
• Works with clients and vendors directly in developing design. 
• Builds effective relationships with existing clients, customers and contractors and develop new business opportunities.
• Responsible for ensuring customer satisfaction goals and expectations are met. 
• Provides leadership, technical direction and development to Automation and Controls team members.
• Assists in the day to day allocation of resources to their projects.
• Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems.
• Responsible for leading the technical execution and team during onsite start-up and commissioning activities.
• Responsible for developing and submitting discipline change notices as needed to the project management team.
• Fully understands and can execute the EPC project approach.
• This position will require making trips to job sites to survey, support installations, and lead startups (travel about 30%).
• Work with our business development team to identify and develop key project and customer pursuits.
• Frequently attends and hosts client events.
• Develops business strategies for future projects.  Understands business needs and profitability factors.
• Reviews and develops engineering hour estimates and proposals for all phases of the project.
• Supports interviewing and hiring process for new team members.
• Coordinates workload with Automation and Controls Department Manager.
• Complies with all company policies and standards.
• All other duties as assigned.     

• Bachelor’s Degree in Controls, Electrical, Mechanical or Chemical Engineering or related degree from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam and 7 years electrical engineering experience.
• Expert knowledge in standard engineering techniques and procedures.
• Strong knowledge of electrical equipment design ANSI and IEEE Standards. Strong computer skills (e.g. Microsoft Office Suite).
• Excellent written and verbal communication skills.
• Experience with leading the discipline design for large projects and delegating work tasks to team members.
• Ability to lead execution of work and resolve issues in a team environment.
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Ability to perform quality reviews for detailed engineering documents and specifications.
• Must have or be able to obtain a Transportation Worker Identification Card (TWIC).
• Professional Engineer (PE) License preferred.

• Ability to perform quality reviews for detailed engineering documents and specifications.
  
• Knowledge of applicable design standards covering Automation & Controls Design/Engineering such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A.
  
• Experienced with variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS).
  
• Experience in Rockwell and Siemens PLC platform.  Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms a plus.
  
• SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus.
  
• MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS.
  
• Machine safety risk assessment and required PL design compliance to ISO13849 is a plus.
  
• Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus.
  
• Experience with PlantPAX and PackML is preferred.
  
• Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired.

One Tech Engineering is searching for an Automation and Controls Engineer for a position located in either Kansas City, Missouri; St. Louis, Missouri; or Atlanta, Georgia. The Automation and Controls Engineer will execute automation and controls engineering design activities for minor to major scale Engineering, Procurement, and Construction (EPC) projects.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Controls, Electrical, Mechanical or Chemical Engineering or a related degree, successful completion of the Fundamentals of Engineering (FE) exam, and 3+ years of electrical engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

Automation and Controls Engineer Responsibilities:

• Responsible for compliance with company and project site safety policies.
• Works with a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design. 
• Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines.
• Responsible for developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization. 
• Responsible for commissioning and startup of those design deliverables.
• Develop controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details.
• Develop electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules
• Develop the specification and design requirements for control panel and equipment vendors, track vendor progression, and lead the Factory Acceptance Tests (FATs).
• Experience with process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves.
• Utilize knowledge of various technologies for selecting the appropriate controls application.
• Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project.
• Develop verification of design, calculations, project studies, design basis and report preparation.
• Interfaces directly with offsite design office and coordinates and tracks execution of all electrical controls department work to that office.
• Responsible for performing quality reviews of project design submittals.
• Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry.
• Interfaces directly with construction personnel in development of contracts and execution of work.
• Tracks Automation and Controls design efforts against budgets and expected progress.
• Works with clients and vendors directly in developing design and builds lasting business relationships.
• Responsible for leadership and guidance of less experienced team members.
• Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems.
• Responsible for technical execution during onsite start-up and commissioning activities.
• Develops and submits discipline change notices as needed to the project management team.
• Understands the basics of the EPC project execution methodology.
• This position will require making trips to job sites to survey and support installations and startups (travel about 30%).
• Begins to understand and utilize automation project sales strategies and develops client relationships.
• Understands and assists in automation standards development for the department.
• Participates in interviews for early career team members.
• Assists in the development of engineering hour estimates and proposals for all phases of the project
• Coordinates workload with the Automation and Controls Department Manager.
• Complies with all company policies and standards.
• All other duties as assigned.     

• Bachelor’s Degree in Controls, Electrical, Mechanical or Chemical Engineering or related degree from an ABET-accredited program and successful completion of Fundamentals of Engineering (FE) exam and 3+ years of electrical engineering experience.
• EPC project and Automation 7 Controls experience preferred.
• Expert knowledge in standard engineering techniques and procedures.
• Strong knowledge of electrical equipment design, ANSI and IEEE Standards.
• Strong computer skills (e.g. Microsoft Office Suite).
• Excellent written and verbal communication skills.
• Experience with leading the discipline design for large projects and delegating work tasks to team members.
• Ability to lead the execution of work and resolve issues in a team environment.
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Ability to perform quality reviews for detailed engineering documents and specifications.
• Must have or be able to obtain a Transportation Worker Identification Card (TWIC)
• Professional Engineer (PE) License Preferred.

• Ability to perform quality reviews for detailed engineering documents and specifications.
  
• Knowledge of applicable design standards covering Automation & Controls Design/Engineering such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A.
  
• Experienced with variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS).
  
• Experience in Rockwell and Siemens PLC platform.  Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms a plus.
  
• SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus.
  
• MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS.
  
• Machine safety risk assessment and required PL design compliance to ISO13849 is a plus.
  
• Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus.
  
• Experience with PlantPAX and PackML is preferred.
  
• Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired.

One Tech Engineering is searching for a Senior Electrical Estimator for a position located in Appleton, Wisconsin; Kansas City, Missouri; or St. Louis, Missouri. The Senior Electrical Estimator will be responsible for leading complex multi discipline estimates for both field and pre-fabrication construction projects with a diverse portfolio of project types and clients

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelors Degree in Engineering, Construction Management or related field and 7 years of direct project Electrical estimating experience

Local candidates preferred or open to relocation. This is not a remote position.

• Advise the estimating manager and estimating director regarding the complexities and risks involved with these multi discipline proposals, and present accurate estimates in a credible and professional manner while minimizing risk to the company.
• Consult with clients, procurement, subcontractors, vendors, or other individuals to discuss and formulate estimates and resolve issues.
• Interface with Procurement and Operations to obtain support and commitment to the cost estimates.
•  Manage the centralized cost estimating database and data models. Create a formal process to support cost estimating and ensure historical data is utilized.
• Review completed projects to compare estimated costs to actual costs and recommend improvements to cost estimating procedures to reduce future discrepancies between estimated and actual costs.
• Review cost trends to assist management in cost reduction and process improvement efforts.
• Research historical data to develop and establish suggested labor units for each proposal and related to cost data or effect cost reductions from similar historical project actuals data.
• Lead the estimating strategy and implementation efforts to help department continuous improvement. Review and approve project summary schedules for validity.
• Manage workload scheduling to ensure timely completion of deliverables.
• Maintains compliance with estimating methodology ensuring quality estimates are produced.
• Review DOR completion, assignments, estimating quantities, and scope of project.
• Review small and disadvantaged business solicitations and evaluations. 
• Manage subcontractor solicitations, quotes, RFP compliance, clarifications, exceptions, and evaluations. Lead communication and implement feedback from operations/prefabrication team (execution plan, achievable construction and prefabrication schedules etc.) regarding each estimate.
• Review and approve specialty and standard equipment pricing.
• Responsible for the review of final estimates before management review and present the estimate to internal and external clients.
• Lead estimate turnover process to operations/fabrication teams.
• Manage cost history, data base management, and estimating process.
• Make recommendations as to fee, contingency, and escalation.
• Prepare and present estimating data for risk review process.
• Review commercial terms and conditions with legal counsel and address risk issues.
• Review and validate value engineering items, alternates, and options.
• Validate accuracy of estimate clarifications and assumptions.
• Review documents for gaps and overlaps in scope of work.
• Provide leadership, guidance, and instruction to less experienced staff.
• Responsible for QA/QC process adherence.
• Responsible for compliance with company and site safety policies.
• Performs other duties as assigned.
• Complies with all policies and standards

• Bachelor's Degree in Engineering, Construction Management or related field and 7 years of direct project Electrical estimating experience.
• Applicable experience may be substituted for the degree requirement.
• Expert knowledge of Microsoft Office Suite.
• Software experience such as Quotesoft, Accubid, Oracle, and PowerBI desired.
• Thorough knowledge of company procedures, estimating techniques, various construction disciplines, cost control systems required.
• Excellent written and verbal communication skills and strong organizational skills.
• Strong analytical and problem solving skills, and attention to detail.
• Ability to handle large volumes of work and multi-task in a fast-paced environment.
• Ability to work independently or in groups, think creatively and analytically, and make quick and sound decisions.

One Tech Engineering is searching for an Electrical Estimator for a position located in Appleton, Wisconsin; Kansas City, Missouri; or St. Louis, Missouri. The Electrical Estimator will be responsible for preparation of all levels of estimates and proposals from start to finish relating to various disciplines that are required to support field and pre-fabrication construction projects.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in Engineering, Construction Management or related field and 3 years of direct project electrical estimating experience

Local candidates preferred or open to relocation. This is not a remote position.

• Prepare and present lump sum bids, proposals, unit costs and quantities for various projects with a diverse portfolio of project types and clients.
• Consult with clients, procurement, subcontractors, vendors, or other individuals to discuss and formulate estimates and resolve issues.
• Interface with Procurement and Operations to obtain support and commitment to the cost estimates.
• Analyze historical data and provide improvement recommendations to cost estimating procedures to reduce future discrepancies between estimated and actual costs.
• Identify cost trends to assist management in cost reduction and process improvement efforts.
• Assist with analyzing completed projects to compare estimated costs to actual costs and determine the reason for any discrepancies.
• Responsible for compliance with estimating methodology ensuring quality estimates are produced.
•  Review DOR completion, assignments, estimating quantities, and scope of project.
• Review small and disadvantaged business solicitations and evaluations.
• Review subcontractor solicitations, quotes, RFP compliance, clarifications, exceptions, and evaluations.
•  Review documents for gaps and overlaps in scope of work.
• Assemble material and labor costs for clients and proposals for construction projects.
• Conduct solicitation and pre-qualification tasks for small and disadvantaged businesses and subcontractors.
• Analyze and insert specialty and standard equipment and material pricing into the estimate.
• Prepare and deliver bid packages to subcontractors.
• Present estimating information and attend pre bid meetings.
• Conduct subcontractor labor and market studies and make recommendations based on those results.
• Develop project summary schedules.
• Evaluate and condition subcontractor and supplier quotes. Develop and present estimating strategy and plan.
• Provide preliminary pricing for indirect and general conditions.
• Evaluate fee, contingency, and escalation and make recommendations.
• Review plans and specifications for risk issues and propose a mitigation strategy.
• Review commercial terms and conditions with legal counsel for cost and risk items and present concerns to lead estimator.
• Responsible for the accuracy and validity of estimate clarifications and assumptions. 
• Analyze and price value engineering for submission.
• Performs other duties as assigned
• Complies with all policies and standards

• Bachelor's Degree in Engineering, Construction Management or related field and 3 years of direct project Electrical estimating experience.
• Applicable experience may be substituted for the degree requirement.
• Expert knowledge of Microsoft Office Suite.
• Software experience such as Quotesoft, Accubid, Oracle, and PowerBI desired.
• Thorough knowledge of company procedures, estimating techniques, various construction disciplines, cost control systems required.
• Excellent written and verbal communication skills and strong organizational skills.
• Strong analytical and problem solving skills, and attention to detail.
• Ability to handle large volumes of work and multi-task in a fast-paced environment.
• Ability to work independently or in groups, think creatively and analytically, and make quick and sound decisions.

One Tech Engineering is searching for a Program Manager for a position located in Denver, Colorado. The Program Manager will be responsible for reviewing project documentation, conducting site visits, and ensuring vendor compliance with quality standards.

The candidate must be a US citizen or hold a green card. The candidate should have at least 5 years’ experience in quality assurance or related roles.

• Review project quality plans, inspection and test plans, and welding documentation.
• Conduct site walks, field inspections, and vendor surveillance audits to ensure adherence to QA/QC standards and safety requirements.
• Support quality assurance activities for projects ranging from $500K to $100M.
• Collaborate with project managers and project leads to ensure quality program adherence across multiple projects.
• Assist in the development of inspection and testing plans, including scheduling of quality witness and inspection points for fabrication and installation activities.

• 5+ years of experience in quality assurance or related roles.
• Experience in coal, combined cycle, and simple cycle power plants is preferred.
• Familiarity with rotating equipment, expansion joints, and transformer replacements.
• CWI certification (current or past) is highly beneficial.
• Strong documentation and Microsoft Office skills.
• Willingness to travel for vendor audits and site visits.

One Tech Engineering is searching for a Purchaser for a position located in Wallingford, Connecticut, or Newton, Massachusetts. The Purchaser will perform purchasing responsibilities throughout the project life cycle which includes ordering materials, supplies, equipment, and the follow through with venders on shipment and delivery.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Supply Chain Management, Law or Construction-related field and 3 years’ direct purchasing experience.

Local candidates preferred or open to relocation. This is not a remote position.

Purchaser Responsibilities:

• Prepare procurement documents and agreements.
• Perform commercial bid evaluations of supplier proposals and coordinate technical evaluations and recommendations to procurement manager and senior purchaser.
• Prepare purchase order documents and enter purchase order information into online purchasing application.
• Prepare expediting supplier submittals to support detailed design and delivery of equipment and material to support construction.
• Prepare front-end documents including prime agreement flow downs.
• Source and qualify potential suppliers to provide required goods and services.
• Communicate and address procurement issues with appropriate parties, including management.
• Compile procurement and expediting status reports.
• Prepare equipment, materials, and subcontracts forms and reports.
• Compile "Request for Proposal" (RFP) documents including documents/drawings/specifications provided by the internal client.
• Prepare procurement packages to engineering specifications.
• Receive, log, distribute, tabulate, and analyze proposals. Make recommendations for purchasing needs for contracts.
• Responsible for updating Project Procurement Status and Material.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor Degree in Supply Chain Management, Law or Construction related field and 3 years direct purchasing experience.
• Applicable experience may be substituted for the degree requirement.  
• Project purchasing experience preferred.
• Oracle Financial R12 software experience preferred.
• Excellent written and verbal communication skills.
• Excellent interpersonal skills.
• Proficient computer skills (e.g. Microsoft Office Suite)
• Strong attention to detail, facilitation, team building, collaboration, organization and problem solving skills.
• Experience in devising new approaches to purchasing problems encountered.
• CPM Certification or CPSM Certification is preferred.

One Tech Engineering is searching for a Category Manager for a position located in Minneapolis Minnesota. The Category Manager will lead the development and implementation of category strategy to optimize cost and improve operations 

The candidate must be a US citizen or hold a green card. The candidate should have at least 5 years sourcing, purchasing or logistics experience. 

• Applies best practice approaches to multiple critical categories.
• In conjunction with logistics personnel, implements optimal inventory strategies.  
  
• Conducts analyses of supply, demand, market, commodity, supplier, contract and “should cost” modeling to determine category strategies  
  
• Monitors industry information and trends, and supplier risk profiles, to keep category strategy current while supporting business requirements.  
  
• Develops complex sourcing events and qualifies, evaluates and selects suppliers for targeted categories of spend. 
  
• Leads multiple tier I supplier relationship management efforts focused on improving total cost of ownership, quality, delivery and continuous improvement.  
  
• Develops plans with suppliers that support business goals and strategies, and drive continuous improvement and collaboration to bring value to both the company and the supplier.  
  
• Develops performance-based scorecards and monitors, documents and evaluates supplier performance Leads the resolution of disputes with suppliers. 
  
• Leads negotiations to establish contracts that support category strategies while meeting business area requirements.  
  
• Reviews, analyzes, verifies and negotiates contract changes or additional work orders.  
  
• Manage contractor claims to resolution and successfully minimize overall impact to cost and schedule.
• Ensures suppliers comply with contract terms and meet all commitments. 
  
• Applies understanding of underlying principles of contract law to administer all category contract agreements.  
  
• In collaboration with business area management, manages and defines the risk elements of the contract and assembles all necessary documentation for obtaining insurance. 
  
• Limits company liability by ensuring all required documents and notices have been obtained and are satisfactory. 
  
• Creates and manages a project plan for the implementation of category strategy.
• Interacts with business leadership to integrate the sourcing and business project plans.  
  
• Manages the completion of supplier, business and supply chain continuous improvement efforts. 
  
• Creates and manages a project plan for the implementation of category strategy. Interacts with business leadership to integrate the sourcing and business project plans.  
  
• Manages the completion of supplier, business and supply chain continuous improvement efforts.

• Bachelor’s degree in Supply Chain Management, Engineering, Project Management, Business, Finance or related field or equivalent experience.  
  
• 5 years of sourcing, chasing or logistics experience.
  
• 2+ years contract formation knowledge and experience, negotiation and project management skills preferred.  
  
• Certified Professional in Supply Management (CPSM) certification preferred.
  
• Proficiency in Microsoft® Office suite and significant experience with purchasing and sourcing systems is required.  
  
• Demonstrated customer service skills.  
  
• Strong interpersonal and relationship skills are required.  
  
• Frequently required to attend meetings.

One Tech Engineering is searching for a Construction Manager for a position located in Lubbock, Texas. The Construction Manager will provide on-site management and direct oversight of the safe, cost effective, day to day construction activities for the construction and installation of additional capital assets.

The candidate must be a US citizen or hold a green card. The candidate should have previous experience with the installation and commissioning activities relating to Combustion Turbines & Generators, Black Start Power Plant builds, and supporting systems

• Monitor day to day activities and ensure short- and long-term goals are being met.
• Daily record keeping of activities along with weekly Project reporting.
• Tracking and reporting of delays, extra work or potential extra work performed by contractors.
• Coordination of construction activities with plant operations to ensure plant reliability and operations remain unaffected during all construction phases.
• Monitor and champion construction safety.
•  Provide visible safety leadership through your actions and performance.
• Participate in worksite audits, safety observations, safety investigations and reporting of incidents and near misses, and accidents/injuries/issues.
• Monitor the implantation of disciplinary measure and/or removal of workers for safety violations per established rules and requirements, monitor compliance with OSHA regulations and perform and report safety observations on all contractors performing work on company projects.
• Provide input into the labor resource strategy for the project.
• Assist with in-depth project constructability assessments and reviews.
• Provide support to team members to execute and/or track critical project aspects including schedule, safety, permit compliance, drawing review, execution plan review, commissioning activities, and cost tracking.
• Establish an effective relationship with all stake holders based on teamwork and open honest communication.
• Provide construction consult to project leads and other team members and assist with mentoring and construction knowledge transfer to other members of the team.
• Ensure adequate inspection and/or monitoring of all work to establish compliance with requirements, and to maintain appropriate records in the project files.
• Participate in construction inspections and quality related site activities.
• Establish, monitor, and track processes to ensure regulatory compliance.
• Ability to work with internal & external locate firms to locate underground gas and electric facilities using various types of information including company maps, construction prints and as-built drawings to determine approximate locations of the facilities.
• Utilize various types of electronic locating equipment.
• Assists in the management of all phases of construction, material deliveries and contractors doing business on company property from start-up to project closeout.
• Works as a team member to construct major equipment (Combustion Turbines, Generators, and associated equipment) in accordance with construction documents.
• Assists senior technicians, engineers and designers in the project design, material specifications and procurement.
• Works closely with department personnel and provides support to complete project schedules within the assigned area of responsibility.
  
  

• Minimum of 7 years of experience as an I&E Technician or Construction Manager within a Power Plant environment (Gas Turbines/Generators).
• Proven experience with installation and commissioning activities for Combustion Turbines & Generators, Black Start Power Plant builds, and supporting systems.
• Strong knowledge of all phases of site construction, including scheduling, cost control, quality assurance, and adherence to project scope and specifications.
• Demonstrated ability to manage contractors, coordinate construction activities, and ensure seamless integration with plant operations.
• In-depth understanding of safety practices, including OSHA regulations, with a strong track record of promoting and enforcing safety on job sites.
• Excellent communication and leadership skills.

One Tech Engineering is searching for an Environmental Scientist Assistant for a position located in Kansas City, Missouri. The Electrical Superintendent will be responsible for field operations on assigned project(s) in order to achieve safe, timely and profitable completion of each project.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree and 7 years of construction management experience or craft supervision experience on electrical projects.

Local candidates preferred or open to relocation. This is not a remote position.

• Responsible for the construction scheduling of the electrical-related activities of the subcontractors to confirm the completion of contractual construction activities.
• Maintains continuity of job progress and maximizes efficiencies related to the assigned area
  
• Responsible for the oversight of the following project work activities: raceway, cable tray, electrical panels, ductbank, grounding, switchgear, transformers, low and medium voltage electrical equipment, wiring, motors, heat tracing, instrumentation, instrumentation calibrations, loop checks and point to point checks, and electrical and control testing.
• Responsible for overall supervision of construction effort, which includes: safety, productivity of crafts, efficient use of materials and equipment, materials management, scheduling, engineering, and contractual performance of the project.
• Responsible for subcontractor contractual compliance on designated electrical construction related activities.
• Build effective client and subcontractor relationships. 
• Interface with client representatives, A/E representatives, and other contractors.
• Collaborate with project management to develop and implement project procedures, working documents, and standards.
• Authorize purchase requisitions, field design change requests, etc., under supervision of Construction Manager and Project Manager.
• Responsible for overall project safety. 
  Reviews and audits site specific safety documentation, including Pre-Task Analysis (PTAs) and Task Safety Observations (TSOs) on a regular basis.
• Provide oversight of electrical and instrumentation installation.
  
• Conduct and record related tests and provide oversight for the calibration of instruments.
  
• Complete daily field reports and take daily pictures to document construction progress.
• Assess future work activities and identify any concerns with work plans by utilizing subcontractors 3-week look ahead report.
• Develop a marked-up and as-built set of drawings to produce the record set documents, and answer RFIs with assistance from Assistant Project Manager or Field Engineer.
• Direct and manage subcontractor as necessary to comply with the established project schedule, and track and verify progress on an installed quantity and work hour basis.
• Verify material deliveries meet specifications and are being stored properly, and required preventative maintenance and/or temporary heating is being performed by the subcontractor (this potentially is coordinated with the Materials Manager).
• Coordinate with the QA/QC Manager to verify all welders on site are qualified to weld on the project.
• Witness all equipment setting and alignment.
• Walk down all systems prior to, during, and post hydrostatic testing to verify compliance with drawings and specifications and signing off on completed system testing and restoration.
• Develop punch lists of items out of compliance or not completed.
• Verify the most current drawing revisions are being used in the field.
• Understand and execute the project scope and any changes that develop.
• Ensure field change orders are executed.
• Oversee craft supervision and project staffing as required.
• Provide oversight of project site material and tool management.
• Responsible for the daily field construction of an individual project in accordance with the established policies, procedures, systems, and requirements approved by the company.
  
• Supervises and directs the daily efforts of the physical construction of the project through daily coordination of all field activities, subcontractor direction, and code/specification compliance.
• Read, interpret, and understand isometric drawings, structural drawings, and P&ID's.
• Performs other duties as assigned.
• Complies with all policies and standards.
  

• Bachelor’s Degree and 7 years of construction management experience or craft supervision experience on electrical projects.
  
• Or an Associate’s Degree and 9 years cof onstruction management experience or craft supervision experience on electrical projects.
  
• Or a High School Diploma/GED  and 11 years of construction management experience or craft supervision experience on electrical projects.
  
• Must have excellent communication skills, strong leadership skills, and a strong safety background.
  
• Computer proficiency in Microsoft Suite.
  
• Must be able to meet company's driving requirements

One Tech Engineering is searching for a Project Coordinator for a position located in in Minneapolis, Minnesota; Denver, Colorado; or Amarillo, Texas. The Project Coordinator will be responsible for processing drawings, RFI submittals and project documentation, coordination on all our new build projects within energy supply’s strategic projects group; new wind farms, solar projects, repowers and other major capital projects.

The candidate must be a US citizen or hold a green card. The candidate must have 2-4 years’ experience being or working on a construction job site.

• Performing email correspondence, and utilizing OneNote to track the submittals, manage when the due dates are for information to go back to the suppliers.
• Responsible for staying on top of the drawings; routing to a group of people who have them.
• Will be working away from their desk, getting things off the printer to prepare packages to support the substation and transmission groups.
• Will be in charge of sending project documents to construction sites.
• Gathers, analyzes, translates and delivers information in clear, concise and meaningful formats based on specific project and/or program requirements and according to established project management standards.
• Provides the project manager support and assistance in scheduling, documentation, communication and cost management.
• Updates the project plan.
• Assists in information collection and validations.
• Provides input to project research information.
• Facilitates collaborative documents and data stores.
• Helps prepare status reports and presentations.
• May coordinate the activities of a project sub team and/or project activities to the extent those efforts
• might affect completion of assigned tasks.
  
  

• 2-4 years of experience on a construction job site.
• Experience with RFI’s, correspondence is a nice-to-have.
• Strong organization and coordination skills.
• Excellent oral and written communication skills are required.
• Must have strong knowledge of MS Office.

One Tech Engineering is searching for a Category Manager for a position located in either Minneapolis, Minnesota, or Denver, Colorado. The Category Manager will handle contract negotiations, vendor management, and sourcing for complex technology projects.

The candidate must be a US citizen or hold a green card. The candidate should have 10+ years of IT sourcing/contracting experience.

• Partner with IT stakeholders on transformation initiatives.
• Lead contract negotiations and manage vendor relationships.
• Provide support for ongoing projects with minimal ramp-up time.
• Participate in vendor and client site visits as needed.
• Drives category strategy working with the business for multiple complex, high business impact categories.
• Responsible for the development and effective execution of sourcing strategy for critical categories.
• Plans for and leads competitive sourcing events and other activities in support of category strategies.
• Develops effective negotiation strategies and conducts negotiations with their category suppliers to achieve category and business objectives.
• Manages risk mitigation efforts and oversees on-going monitoring activities.
• Forms and executes contracts with critical suppliers. 

• 10+ years of IT sourcing/contracting experience.
• Experience with SAP contracting and utility-based IT projects.
• Previous utility industry experience is preferred.
• Negotiation and vendor management.
• Customer Information Systems (CIS) background preferred.
• Wind contracts and regulatory knowledge.
• Multi-vendor environment contracting experience is a nice to have.
• Systems integrator services experience is a nice to have.

One Tech Engineering is searching for a Project Coordinator for a position located in either Denver, Colorado, or Minneapolis, Minnesota. The Project Coordinator will be responsible for reconciling backlog work orders and ensuring all necessary actions are completed efficiently.

The candidate must be a US citizen or hold a green card. The candidate should have at least 3 years of related work experience.

• Review and process backlog work orders to ensure accuracy and completion.
• Work through assigned lists, complete tasks, and request additional lists as needed.
• Communicate with coordinators, stakeholders, and team members to resolve issues.
• Track and report progress using Microsoft Excel and other tools.
• Work independently while collaborating with the team as necessary.

• 3+ years of related work experience.
• Experience working in the power or utility industry is a plus.
• Experience with work order management is beneficial.
  
• Proficiency in Microsoft Excel and the Microsoft Office Suite (Outlook, Teams, etc.)
• SAP experience is a nice-to-have.
• Strong attention to detail.
• Ability to work independently while collaborating as needed.

• Responsible for recognizing, monitoring, and making recommendations to correct workplace safety hazards through on-site audits, consulting, ergonomic assessments, and interventions according to OSHA and other regulatory agencies; and collaborating on safety policy development and training. Conduct site safety orientations.
• Participate in Pre-Job Safety Reviews and project planning to ensure successful and safe execution of work tasks.
• Provide coaching to employees on safety practices.
• Conduct a weekly ‘all hands safety meeting’.
• Manage all hot work permitting.
• Oversee all incident investigations.
• Generate all required documentation in SiteDocs.

• At least 5-10+ years of utility safety experience.
• Previous experience working with utility contractors, and site personnel.
• Certified Utilities Safety Professional certification preferred
• Working knowledge of OSHA Compliance.
• Proficient with Microsoft office; Spreadsheets in Excel, Experience with Eco Online.

One Tech Engineering is searching for a Construction Manager for a position located in Seminole, Texas. The Construction Manager will provide on-site management and direct oversight of the safe, cost effective, day to day construction activities for the construction and installation of additional capital assets.

The candidate must be a US citizen or hold a green card. The candidate should have previous experience with the installation and commissioning activities relating to Combustion Turbines & Generators, Black Start Power Plant builds, and supporting systems

• Monitor day to day activities and ensure short- and long-term goals are being met.
• Daily record keeping of activities along with weekly Project reporting.
• Tracking and reporting of delays, extra work or potential extra work performed by contractors.
• Coordination of construction activities with plant operations to ensure plant reliability and operations remain unaffected during all construction phases.
• Monitor and champion construction safety.
•  Provide visible safety leadership through your actions and performance.
• Participate in worksite audits, safety observations, safety investigations and reporting of incidents and near misses, and accidents/injuries/issues.
• Monitor the implantation of disciplinary measure and/or removal of workers for safety violations per established rules and requirements, monitor compliance with OSHA regulations and perform and report safety observations on all contractors performing work on company projects.
• Provide input into the labor resource strategy for the project.
• Assist with in-depth project constructability assessments and reviews.
• Provide support to team members to execute and/or track critical project aspects including schedule, safety, permit compliance, drawing review, execution plan review, commissioning activities, and cost tracking.
• Establish an effective relationship with all stake holders based on teamwork and open honest communication.
• Provide construction consult to project leads and other team members and assist with mentoring and construction knowledge transfer to other members of the team.
• Ensure adequate inspection and/or monitoring of all work to establish compliance with requirements, and to maintain appropriate records in the project files.
• Participate in construction inspections and quality related site activities.
• Establish, monitor, and track processes to ensure regulatory compliance.
• Ability to work with internal & external locate firms to locate underground gas and electric facilities using various types of information including company maps, construction prints and as-built drawings to determine approximate locations of the facilities.
• Utilize various types of electronic locating equipment.
• Assists in the management of all phases of construction, material deliveries and contractors doing business on company property from start-up to project closeout.
• Works as a team member to construct major equipment (Combustion Turbines, Generators, and associated equipment) in accordance with construction documents.
• Assists senior technicians, engineers and designers in the project design, material specifications and procurement.
• Works closely with department personnel and provides support to complete project schedules within assigned area of responsibility.
  
  

• Minimum of 10 years of experience as an I&E Technician or Construction Manager within a Power Plant environment (Gas Turbines/Generators).
• Proven experience with installation and commissioning activities for Combustion Turbines & Generators, Black Start Power Plant builds, and supporting systems.
• Strong knowledge of all phases of site construction, including scheduling, cost control, quality assurance, and adherence to project scope and specifications.
• Demonstrated ability to manage contractors, coordinate construction activities, and ensure seamless integration with plant operations.
• In-depth understanding of safety practices, including OSHA regulations, with a strong track record of promoting and enforcing safety on job sites.
• Excellent communication and leadership skills.

• Responsible for capturing any field changes to the design.
• Responsible for communicating properly to the responsible parties within the Company on a routine or daily basis.
• Responsible for insuring the constructor performs the Work to the Company's specifications and standards.
• Responsible for insuring the constructor uses the proper materials in the proper place on the Project.
• Shall take all precautions to protect Company's equipment, materials and customers and be a good representative for Company.

• 10 + years of substation construction experience.
• Previous Journeymen or Substation Electrician experience required
• Excellent oral and written communication skills.

• Perform primary project controls assignments to support Project Managers.
• Accountable for generating reports, assisting with control activities, responding to data requests and developing/maintaining/supporting project schedules and/or detailed cost tracking.
• Coordinates with Project Managers to obtain weekly and monthly cost and schedule updates. This includes project financials, the health of the financials, and the project as a whole by submitting monthly forecasts accruals.
• Assist the Project Managers in providing accurate project forecasting and review of expenditures.
• Attend project meetings.

• 5-7 years of experience with cost accounting within the construction, renewables, or oil and gas industry.
• Strong proficiency in Microsoft Excel.
• Experience in SAP (ECC) is strongly preferred.
• Experience with macros is preferred.
• PMP certification is a nice to have.
• Good communication skills.

One Tech Engineering is searching for a Survey Technician for a position located in Denver, Colorado. The Survey Technician will be responsible for operating AMLD-equipped vehicles to conduct night-time surveys of natural gas systems, ensuring accurate data collection and prompt reporting of any detected gas leaks.

The candidate must be a US citizen or hold a green card. The candidate should have previous experience in a delivery driving role.

• Operate fleet vehicles equipped with Advanced Mobile Leak Detection (AMLD) technology to survey natural gas systems.
• Follow specific maps to ensure complete and accurate coverage of designated survey areas.
• Conduct surveys during nighttime hours to enhance the detection of potential gas leaks.
• Turn on AMLD equipment, drive to assigned areas, and perform the survey as mapped.
• Accurately and thoroughly collect data during each survey run.
• Relay any alarms to the gas dispatch team, who will take appropriate action.
• After completing the survey, return vehicles to the service center.
• Ensure vehicles are properly plugged in and charged at the end of each shift.

• Previous experience in delivery driving jobs, such as those with Amazon, UPS, or USPS.
• Familiarity with the following routes and maps is essential.
• Experience using navigation software like Google Maps or Apple Maps is beneficial.
• Experience using tablets and specific software applications, including Picaro, AMLD leak survey software, and PQ software.
• Familiarity with driving around the Denver metro area is a plus.
• Strong communication skills.
• Must have a valid drivers license.

One Tech Engineering is searching for an Electrical Construction Supervisor for a position located near Kit Carson, Colorado. The Electrical Construction Supervisor will oversee the installation, testing, and commissioning of electrical systems, including power distribution systems, substations, high voltage systems, low voltage systems, and SCADA systems.

The candidate must be a US citizen or hold a green card. The candidate should have 5 to 7 years of electrical experience on wind turbine systems, including experience with power distribution systems, high voltage, low voltage, and substations.

• Perform inspections of electrical systems, including wiring, grounding, switchgear, transformers, and control panels.
• Verify compliance with NEC, IEC, IEEE, and project-specific electrical codes and standards.
• Inspect electrical installations for proper terminations, torque values, insulation resistance, and overall workmanship.
• Review and approve electrical work based on project specifications and quality control procedures.
• Conduct visual and functional inspections of electrical components, ensuring proper energization and operational readiness.
• Witness and document electrical testing, including megger testing, high-potential testing, and functional performance testing.
• Verify electrical grounding and bonding systems meet project requirements.
• Oversee commissioning activities, ensuring proper energization sequences and safe startup procedures.
• Identify and document non-conformances, recommending corrective actions as needed.
• Maintain detailed records of inspections, test results, and corrective actions.
• Prepare daily and weekly reports on inspection findings and status updates.
• Ensure adherence to OSHA, NFPA, and other safety regulations related to electrical systems.
• Collaborate with site engineers, contractors, and safety personnel to resolve compliance issues.
• Work closely with construction teams, project managers, and subcontractors to address electrical issues and provide guidance.
• Support and participate in safety meetings, audits, and risk assessments.
• Assist in reviewing electrical installation drawings, single-line diagrams, and cable schedules for accuracy.

• 5 to 7 years of electrical experience on wind turbine systems, including experience with power distribution systems, high voltage, low voltage, and substations.
• Electrical degree is required.
• Knowledge of OSHA, FERC regulations, and electrical/mechanical codes is required.
• Proficiency in project management tools such as Microsoft Projects and ProjectWise.
• Direct experience with Vestas platforms is preferred.
• Familiarity with Bluebeam is preferred.
• Ability to effectively manage and coordinate activities in the field.
• Strong communication skills.
• Must have a valid driver’s license.

One Tech Engineering is searching for a Geologist Assistant for a position located in Wichita, Kansas. The Geologist Assistant will assist on a variety of environmental based tasks as required by the project including federal, state, local, and commercial clients. The Geologist Assistant will also be responsible for field sampling, investigations, and report writing.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s in Geology or Environmental degree and previous internship or consulting experience.

Local candidates preferred or open to relocation. This is not a remote position.

Geologist Assistant Responsibilities:

• Assist with field related activities including logging soils, air monitoring during investigation and remediation activities, installation of groundwater monitoring wells, collection of soil and groundwater samples for laboratory analysis, and collection of soil for physical testing.
• Assist in assessing soil and groundwater data, developing soil and groundwater sampling plans, data compilation for soil, air and groundwater analytical results.
• Assist with proposal and report writing for environmental based projects.
• Assist in coordinating and scheduling subcontractors for field investigation activities and assisting with site remediation planning and implementation.
• Assist in coordinating laboratory analysis appropriate to the proper identification and evaluation of samples.
• Assist with on-site field monitoring to document compliance with various federal, state, and local permit requirements during project construction.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor’s degree in Geology or related Environmental degree required.
• Prior internship and/or related consulting experience.
• Previous internship experience, including hazardous site assessment experience, such as Phase I, Phase II and remediation preferred.
• Basic knowledge in standard geological techniques, principles and procedures.
• Basic knowledge of the Unified Soil Classification System. glacial deposits, hydrogeology and ground water sampling.
• Basic knowledge of OSHA, CERCLA and remedial design.
• Excellent written & verbal communication skills.
• Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.
• Proficient computer skills (e.g. Microsoft Office Suite).
• Basic knowledge in ArcGIS, RockWare, and Adobe Illustrator preferred.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Demonstrated leadership skills.
• Valid driver's license is required
• OSHA 40-hour HAZWOPER training is preferred.

One Tech Engineering is searching for a Designer who has previous experience with cabinetry design or commercial design experience, for a position located near Lakeville, Minnesota.

The Designer should have prior design experience and knowledge of CAD drafting and designing. This position will work in the commercial industry designing casework, cabinetry, seating, and interiors.

• Uses AutoCad and other software in the design of custom hospitality projects.
• Designs on specific hospitality industry projects as assigned.
• Makes changes to designs to improve upon design after mocked up in the shop.
• Assists in planning meetings making suggestions for interiors for the hospitality industry.
• Works in the Hospitality industry designing casework/cabinetry, seating and interiors.
• Works closely with estimators and shop floor to ensure high quality products.

• Must have a working knowledge of AutoCad.
• 1-3 years of experience required.
• 1-2 years of millwork experience preferred.
• AAS in Drafting or Design.
• Working experience with different types of materials: wood, metal plastics.
• Previous experience in a millshop, woodshop or cabinet shop preferred.

One Tech Engineering is searching for a Manufacturing Engineer for a position located in Neillsville, Wisconsin. The Manufacturing Engineer leads the inspection team to ensure high-quality output while also supporting process improvement, new product introduction, and manufacturing system development.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have 4-10 years of experience in manufacturing engineering and/or quality inspection.

Manufacturing Engineer Responsibilities:

• Lead new product introductions and design-for-manufacturability reviews with customers.
• Apply standard and advanced manufacturing and quality techniques to develop and optimize processes.
• Support reverse engineering efforts by generating accurate blueprints from customer-supplied parts.
• Lead or participate in cost reduction initiatives and feasibility studies as part of cross-functional teams.
• Use lean tools and techniques to identify and execute continuous improvement initiatives.
• Ensure engineering documentation meets company standards and guidelines.
• Stay current with emerging technologies and manufacturing methods to improve agility, cost, and quality.
• Monitor and report project progress, expenditures, and findings.
• Supervise quality technicians and inspectors, providing training on inspection methods and tools.
• Investigate root causes of defects and lead the development of corrective actions.
• Develop and enforce inspection policies, schedules, and procedures.
• Maintain and improve relationships with internal teams, suppliers, and customers to resolve quality issues.
• Ensure customer satisfaction by delivering defect-free products and overseeing third-party inspections.
• Support audits and maintain the calibration and maintenance of inspection equipment.
• Conduct hiring, discipline, and performance appraisals for quality personnel.
• Develop a cohesive and motivated team culture that encourages accountability and excellence.
• Schedule department team members effectively to support production and inspection needs.
• Foster cross-departmental collaboration and build effective working relationships across facilities.

• Bachelor's degree in engineering or a related technical field preferred; associate degree with extensive experience considered.
• 4-10 years of experience in manufacturing engineering and/or quality inspection.
• Proficiency in interpreting technical drawings and applying GD&T, tolerance analysis, and statistical tools.
• Working knowledge of Microsoft Office (Word, Excel, Outlook) and ERP systems such as Visual Enterprise or uniPoint.
• Demonstrated experience in lean manufacturing, root cause analysis, and corrective/preventive action processes.
• Strong communication and interpersonal skills across multiple organizational levels.
• Capable of resolving technical and operational issues independently and as part of a team.
• Ability to manage multiple priorities and deliver results within defined timelines.