Construction Supervisor

One Tech Engineering is searching for a Civil Engineer for a position located in La Jolla, California. The Civil Engineer will work on project teams to create designs for new projects, alterations and redevelopments on a variety of projects including power, process, corporate, healthcare, pipeline airports, institutional, industrial, manufacturing, government and military facilities. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Civil Engineering or related degree from an ABET accredited program and a minimum of 3 years of civil engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Perform civil design of projects from the conceptual phase through design completion.
• Modify and review production drawings for a variety of projects including, but not limited to: power plants, process facilities, industrial facilities, healthcare facilities, airports, educational institutions, commercial, and governmental and military facilities.
• Design civil components for project needs and requirements that are set forth by the project managers.
• Applies strong knowledge of commonly used civil engineering/design concepts, principles, practices, codes, and procedures within the civil engineering services industry.
• Research and compile project related data as required by the project managers.
• Compiles studies and reports. Writes specifications.
• Update drawings provided by senior engineers to verify corrections are made within multiple CAD related software.
• Compiles information for client presentations, shop drawing review, and contract administration for the design of power, process, pipeline, industrial, healthcare, airports, educational institutions, commercial, and governmental and military facilities.
• Performs field inspections, measurements or calculations for public and private clients.
• Performs other duties as assigned
• Complies with all policies and standards.

• Bachelor’s Degree in Civil Engineering or related degree from an ABET accredited program, and minimum 3 years of civil engineering experience
• Or a Bachelor’s Degree in Civil or related Engineering Technology from an ABET accredited program and successful completion of the Fundamentals of Engineering (FE) exam and minimum 3 years of civil engineering experience.
• Or a Master’s Degree in Civil Engineering and min 2 years of civil engineering experience.
• Strong knowledge of standard civil engineering techniques and procedures.  
• Excellent written and verbal communication skills.  
• Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.  
• Proficient in Microsoft Office Suite.
• Strong computer skills (e.g. AutoCAD, MicroStation, BIM (Revit), Civil 3D, PLS, PLS-CADD, RISA-3D, MathCADD), and/or hydraulic, hydrologic, pavement, civil analysis programs.  
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.  
• Engineers in Training-EIT Certification is preferred.

One Tech Engineering is searching for an Electrical Designer for a position located in Lexington, Kentucky. The Electrical Designer will perform various phases of planning, site evaluations, analytical designs, report preparation, specifications, and preparation of proposal and construction documentation and electrical plans as part of a project team. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in drafting technology or a related field and a minimum of 7 years of related/relevant experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Design various electrical projects including creating electrical schematics, grid plan layouts, electrical power systems, lighting systems, protection and controls, and site and facility design.
• Follow all company, client and project design and drafting standards.
• Plan and develop drawings for production work including problem analysis, design layout and calculations on non-routine assignments of substantial variety and complexity.
• Execute a variety of electrical design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components and refining rough sketches.
• Execute changes to designs or sketches and redlines or mark-ups on ongoing projects.
• Analyze reports, drawings and tests to plan and design projects.
• Interpret and incorporate design codes and specifications related to design requirements.
• Review design drawings for quality assurance within scope, budget and schedule.
• Perform project tasks and assignments within budgeted hours and deadlines.
• Compute volume calculations for conduit/grounding layouts, equipment and panel wiring diagrams and relay panel schematics.
• Organize and maintain all revisions of project drawings, plot files and project-related information are stored in a logical and well-structural manner.
• Responsible for clear and concise written and verbal communications, as it relates to the project client coordination.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor's Degree in drafting technology or related field and a minimum of 7 years related/relevant experience.
• Or an Associate’s Degree and a minimum of 8 years related/relevant experience.
• Or a High School degree and a minimum of 9 years of progressive detailing and design experience is required.
• Advanced understanding of design software such as: AutoCAD, MicroStation, and Excel to develop the design deliverables.
• Ability to learn and effectively utilize new design software programs.
• Advanced ability to utilize both 2D and 3D applications to prepare engineering drawings.
• Advanced knowledge in design, calculations and design systems.
• Advanced knowledge in the theory and practices of assigned discipline; competent in the fundamental concepts of other disciplines as they relate to the assigned discipline; and capable of operating related discipline design software necessary to execute production tasks.
• Ability to work collaboratively with others including, but not limited to Project Managers, Engineers and Designers in a multi-discipline project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
• Excellent written & verbal communication skills.
• Strong analytical and problem-solving skills and attention to detail.

One Tech Engineering is searching for a Construction Supervisor for a position located in Denver, Colorado. The Construction Supervisor will lead daily field supervision, setting priorities and monitoring safety, quality, and schedule performance.

The candidate must be a US citizen or hold a green card. The candidate should have 7+ years in design, construction, operations, engineering or maintenance of utility systems/power generation plants or related industries/fields or equivalent.

• Coordinate vendors and contractors, ensuring alignment on access, logistics, and work sequencing.
• Support scheduling, drawing constructability reviews, estimate reviews, site logistics, and other early project planning to improve deliverability.
• Manage site logistics, material handling, equipment utilization, and resource readiness.
• Oversee quality and safety programs through inspections, briefings, and issue resolution.
• Maintain real‑time communication with project teams and provide clear daily/weekly reporting.
• Enhances safety performance and quality assurance.
• Reduces delays through proactive issue identification and field‑driven problem solving.
• Strengthens coordination across engineering, project management, and field teams.
• Drives more predictable, reliable, and efficient project outcomes.
• Supports on-site plant engineering teams when multiple/large projects are happening to ensure adequate on-site coverage and contractor management is in place.

• 7+ years in design, construction, operations, engineering or maintenance of utility systems/power generation plants or related industries/fields or equivalent.
• Associates or technical degree preferred.
• Field experience, including working knowledge of techniques, materials, terminology of field construction/maintenance, and inspection activities.
• Demonstrated technical expertise in specific functional areas, including standards, procedures, and applicable government/environmental regulations. 
• Strong planning skills and experience with determining crew sizes and durations for construction activities.
• Familiarity with work packages, construction task planning, and work and asset management applications. 
• Demonstrated ability to effectively communicate company/business area policies, procedures, and objectives to various stakeholders.  
• Completion of an approved apprentice program in an appropriately related craft is preferred.
• Demonstrated understanding of utility finance is preferred.

One Tech Engineering is searching for a Project Manager for a position located in Denver, Colorado. The Project Manager will manage the Purchase Requisition (PR) and Purchase Order (PO) processes within the department.

The candidate must be a US citizen or hold a green card. The candidate should have 1–3 years of related experience, preferably in utilities, government, or public entities.

• Process and approve purchase orders accurately and efficiently.
• Manage vendor relationships and communications.
• Match invoices to purchase orders to ensure proper accounting.
• Support reporting related to spend, including tracking and differentiating vendor costs across programs.
• Perform data-driven tasks such as data entry, PR/PO workflow management, and invoice matching.
• Assist in creating reports analyzing vendor spend and program cost comparisons over time.
• Collaborate closely with Project Managers and Construction Managers.
• Contribute to a tightly integrated team supporting construction projects, including a developing team of on-site Construction Managers.

• 1–3 years of related experience, preferably in utilities, government, or public entities
• Project management experience is preferred.
• Strong computer skills.
• Experience with data analytics and reporting.
• Knowledge of purchase orders and purchasing processes.
• Vendor management experience.
• Exposure to project management practices.
• Experience supporting construction projects is a plus.
• Background in purchasing, planning, or procurement is a plus.
• PMP certification is a nice to have.

One Tech Engineering is searching for a Proposal Coordinator for a position located in Chesapeake, Virginia. The Proposal Coordinator will assist in developing the proposal plan, managing the release of Requests for Proposals (RFPs), and overseeing the process for assigned business development proposals to help the company secure new work.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s degree in marketing, communications, business administration, or related field.   

Local candidates preferred or open to relocation. This is not a remote position.

• Assist proposal development efforts in collaboration with business development and project management leadership to develop distinctive value propositions that enhance our clients' competitive positions. 
• Assist with developing and documenting the proposal plan, draft storyboards, development of proposal/win strategy, proposal team assignments, and initial proposal management plan.
• Assist with pink team review and adjust marketing materials in response to review results and requests.
• Assist with the review of the go/no-go decision, participate in official proposal kickoff meeting, and assist in the development of graphics and visuals.
• Support the development of metrics such as; change orders, safety, budget, schedule, diversity goals, and community involvement activities.
• Attend professional association meetings, trade shows and conferences; and build professional network. 
• Assist with the set up and preparation of the booth.
• Performs other duties as assigned
• Complies with all policies and standards

• Bachelor’s degree in marketing, communications, business administration, or related field.   
• Applicable years of experience may be substituted for degree requirement.
• Proficient in Microsoft Word, Excel, and Power Point. 
• Adobe InDesign, Illustrator, and Photoshop experience preferred. 
• Excellent communication skills: verbal, technical writing and creative writing as well as proofreading and editing. 
• High level of attention to detail. 

One Tech Engineering is searching for an E&C Engineer for a position located in Denver, Colorado. The E&C Engineer will support the company’s energy supply projects group to help manage capital projects at the power plants across the region.

The candidate must be a US citizen or hold a green card. The candidate should have Bachelor’s degree in Engineering and experience working in manufacturing/plant environment.

• Manage all emergent capital projects at the plant and support larger base and major capital projects.
• Partner with reliability engineering to develop project scopes and justifications, submit requests through the company’s emergent capital process, and manage all approved projects.
• Oversee approximately 20 small projects simultaneously while also assisting with larger base capital initiatives.
• Work closely with operations and reliability engineering to understand plant systems, how they operate, and help plan future work to maintain plant reliability.
• Attend daily POD meetings (internal morning meetings focused on daily critical tasks) and collaborate with operations and reliability personnel throughout the day.
• Oversee contractors executing project work in the field.
• Complete administrative project tasks, including developing scopes of work, writing technical specifications, obtaining equipment quotes, managing bids when necessary, and coordinating material deliveries and installation with the plant.

• Bachelor’s degree in Engineering and 2+ years of experience working in a manufacturing or plant environment (e.g., power plant).
• Previous Civil or Structural Engineering experience with a PE license is preferred.
• Experience managing projects from cradle to grave.
• Prior experience managing contractors.
• Strong project management experience, including project plan development, charters, budgeting, and financial oversight.
• Ability to multitask and manage multiple priorities without sacrificing quality; demonstrates initiative, teamwork, and strong interpersonal and communication skills.
• Proficiency in Microsoft Office Suite (Outlook, Teams, Excel, SharePoint).
• Completion of the FE (Fundamentals of Engineering) exam preferred.

One Tech Engineering is searching for a Civil Designer for a position located in Atlanta, Georgia, or Charlotte, North Carolina. The Civil Designer will perform various phases of planning, proposal preparation, site evaluations, analytical designs, report preparation, specifications, and preparation of permitting, construction, and environmental plans and documentation as part of a project team.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in drafting technology or a related field and a minimum of 7 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Design civil engineering projects including utilities and pipeline design, site design, land development, permanent and temporary access roads, storm drainage systems, storm water management facilities, water and sanitary sewer utility design, sediment and erosion control, and traffic control.
• Develop drawings for production work including problem analysis, design layout and calculations on non-routine assignments of substantial variety and complexity.
• Execute a variety of civil design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components and refining rough sketches.
• Execute changes to designs or sketches and mark-ups on ongoing projects.
• Analyze reports, maps, drawings, tests, and other topographical and geologic data to plan and design projects.
• Responsible for incorporating design codes and specifications related to design requirements.
• Review design drawings for quality assurance within scope, budget and schedule.
• Report volume calculations for excavation, dredging, and upland site grading.
• Review schedules, budgets and project criteria and apply to civil design and layouts.
• Responsible for revisions of project drawings, plot files and project-related information storage in a logical and well-structured manner.
• Performs other duties as assigned.
• Complies with all policies and standards.
  
  

• A Bachelor’s Degree in drafting technology or a related field and a minimum of 7 years of related experience.
• An Associate’s Degree and a minimum of 8 years of related experience.
• Or a High School and a minimum of 9 years progressive detailing and design experience. 
• Expert understanding of design software such as: AutoCAD, Civil 3D and Excel to develop the design deliverables. 
• MicroStation experience a plus.
• Knowledge in design, calculations and design systems.  
• Knowledge in the theory and practices of civil discipline; competent in the fundamental concepts of other disciplines as they relate to the assigned discipline; and capable of operating related discipline design software necessary to execute production tasks.  
• Ability to work collaboratively with others (Project Managers, Engineers and Designers) in a multi-discipline and multi-office project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.  
• Excellent written & verbal communication skills.  
• Strong analytical and problem solving skills, and attention to detail. 
• Proven ability to manage multiple, competing projects and meet tight deadlines.

One Tech Engineering is searching for a Mechanical Designer for a position located in Atlanta, Georgia, or Charlotte, North Carolina. The Mechanical Designer will perform various phases of planning, site evaluations, analytical designs, report preparation, specifications, and preparation of proposal and construction documentation and mechanical plans as part of a project team.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in drafting technology or a related field and a minimum of 7 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Perform a variety of assignments using prescribed methods and standard techniques including drawing sequence and presentation, incorporating various system components, and refining rough sketches.
• Follow all company, client and project design and drafting standards.
• Produce complete PFDs and P&IDs from verbal or written descriptions from the design engineer.
• Produce complete plot plans, sections, and details from verbal or written descriptions from the design engineer. 
• Execute basic formulas, principles and practices, and use acquired knowledge of fundamental concepts and practices pertaining to the mechanical discipline.
• Plan and develop drawings for production work including problem analysis, design layout and calculations on non-routine assignments of substantial variety and complexity.
• Execute variety of mechanical design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components and refining rough sketches.
• Execute changes to designs or sketches and redlines or mark-ups on ongoing projects.
• Analyze reports, drawings, and tests to plan and design projects.
• Interpret and incorporate design codes and specifications related to design requirements.
• Review design drawings for quality assurance within scope, budget and schedule. 
• Perform projects tasks and assignments within budgeted hours and deadlines.
• Compute calculations for layouts, equipment, wiring diagrams, and schematics.
• Responsible for the revisions of project drawings, plot files and project-related information are stored in a logical and well-structured manner.
• Responsible for clear and concise written and verbal communications, as it relates to the project client coordination.
• Performs other duties as assigned.
• Complies with all policies and standards.
  
  

• Bachelor’s Degree in drafting technology or related field and a minimum of 7 years of related experience.
• Or an Associate Degree and a minimum of 8 years related experience.
• Or a High School and a minimum of 9 years progressive detailing and design experience. 
• Advanced understanding of design software, such as: AutoCAD, Plant3D, and Excel, to develop the design deliverables. Familiarity with MicroStation and CadWorx a plus.
• Ability to learn and effectively utilize new design software programs. 
• Advanced ability to utilize both 2D and 3D applications to prepare engineering drawings. 
• Familiarity and skill with geolocated models, plant coordinate systems, and other spatial baselines a must.
• Knowledge in design, calculations and design systems. 
• Ability to work collaboratively with others, including, but not limited to Project Managers, Engineers and Designers in a multi-disciplinary and multi-office project team environment to resolve design or drawing issues as appropriate and to accomplish objectives. 
• Excellent written & verbal communication skills. 
• Strong analytical and problem-solving skills, and attention to detail.
• Proven ability to manage multiple, competing projects and meet tight deadlines.

One Tech Engineering is searching for a Senior Site Safety & Health Specialist for a position located in Houston, Texas. The Senior Site Safety & Health Specialist will be responsible for leading and implementing project-specific safety policies and procedures and provide professional Safety & Health leadership to the project management team in a heavy construction environment.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in Occupational Health and Safety, Engineering, or Construction Management and 5+ years of high voltage experience in overhead transmission and distribution, and substations.

Local candidates preferred or open to relocation. This is not a remote position.

• Manage the Site Safety & Health program deliverables as defined by the Corporate Safety & Health Department of while responding to questions and/or concerns related to site specific safety and health compliance issues in a timely manner.
• Manage compliance with applicable Local, State, and Federal Occupational Safety and Health Administration (OSHA) rules and regulations.
• Manage Safety & Health programs in order to achieve and maintain the company goal of zero safety incidents.
• Conduct regular health and safety performance reviews, assessments and complete documentation to verify that locations are in compliance with Corporate and regulatory requirements.     
• Manage and resolve actions causing a work stoppage when circumstances could result in immediate danger to life and health on a project. 
• Report and present work stoppage issues to the project management team and collaborate with the team to develop practices to prevent future work stoppage situations.    
• Consult with site personnel on the company’s Safety & Health issues and recommend best practices.  
• Assess Safety & Health issues and opportunities at the project site, before the work begins and implement corrective action based on policies, guidelines and procedures for resolution. 
• Manage the on-site Safety & Health program directly with the client Safety & Health Department to ensure collaboration on any site safety & health issues, coordination of preventative measures, and building working relationships with project staff and each subcontractor safety representative to ensure proper compliance is maintained. 
• Manage project Safety & Health walk-through assessments. Review all assessment findings with appropriate parties.  Follow up by documenting the items which require immediate correction and ensure that these items are corrected in a timely manner.
• Compile memos relative to safety, including assisting Site Management with correspondence to heighten safety awareness, project safety and health goals and ensure a safe and productive work environment is a priority among all project personnel.
• Lead, conduct, validate, and document training on Safety & Health subjects as applicable to the work being conducted. 
• Review near miss, property damage, environmental incidents and accident investigation reports. Recommend countermeasures as appropriate.
• Recommend solutions to Corporate Safety & Health regarding the Project Safety & Health Program challenges, objectives, and progress; ensuring high level of communication.
• Responsible for the completion of the companys Daily Field Safety & Health Report forms, maintain all required safety records in an audit ready state and submit all documentation as required to Corporate Safety & Health. 
• Drive to various project site locations.
• Performs other duties as assigned
• Complies with all policies and standards

• Bachelor's Degree in Occupational Health and Safety, Engineering, or Construction Management and 7 years construction safety, general industry safety, or construction management. 
• Or an Associate Degree in Occupational Health and Safety, Engineering, or Construction Management, and 9 years construction safety, general industry safety, or construction management. 
• Or a High School Diploma/GED  and 11 years construction safety, general industry safety, or construction management. 
• Must have previous high voltage experience in overhead transmission and distribution, and substation experience, preferably at least 5 years of experience.
• Experienced knowledge of Occupational Safety & Health Administration  (OSHA) Construction and General Industry Regulations, as well as, America National Standards Institution (ANSI), National Institute for Occupational Safety & Health (NIOSH), Army Corps of Engineers (CoE), Engineers Manual 385-1 and National Electrical Code (NEC) Standards.               
  
• Currently have a Certified Utility Safety Professional (CUSP) credential, safety professional credential through the Board of Certified Safety Professionals, or other equivalent certifying body.                         
• Must be proficient in the use of computer software (i.e., Microsoft Word, Excel, PowerPoint).  
• Must be willing to work various schedules at the project site location.   
• Must meet standards to qualify for and maintain the Company's vehicle driving privileges as outlined in the Company's Motor Vehicle Safety Policy.   
• Valid driver's license required 
• Excellent verbal and written communication skills.
• OSHA 10-hour Construction Outreach Safety Training Course orOSHA 30-hour Construction Outreach Safety Training Course.

One Tech Engineering is searching for a Material Coordinator for a position located near Hastings, Minnesota. The Material Coordinator will support material strategy planning by pulling data, running reports, analyzing information, and supporting shelf-life discussions.

The candidate must be a US citizen or hold a green card. The candidate should have a few years of relevant professional experience working with databases and strong computer skills, including Microsoft platforms and SAP.

• Pull, compile, and analyze data to support material planning and inventory management.
• Run reports and maintain accurate records within Microsoft platforms and SAP.
• Prepare and host meetings to review data and reporting findings.
• Coordinate with material warehouse personnel, maintenance teams, and site leadership.
• Support shelf-life discussions and related material strategy initiatives.
• Ensure accurate and timely communication of data and insights to internal stakeholders.

• A few years of relevant professional experience working with databases and strong computer skills, including Microsoft platforms and SAP.
• Strong analytical skills with the ability to interpret and summarize data.
• Self-motivated and able to work independently as a self-starter.
• Excellent communication skills, including the ability to host and facilitate meetings.
• Experience in supply chain or inventory management is a plus.

One Tech Engineering is searching for a Designer for a position located in Phillips, Wisconsin. The Designer will design and manage electric distribution projects for new and existing customers.

The candidate must be a US citizen or hold a green card. The candidate will have several years of professional work experience and basic electrical knowledge or background.

• Interact with customers and address their project needs.
• Manage projects from planning through execution.
• Conduct field assessments and surveys.
• Perform system design using GE Smallworld (customized GIS).
• Size transformers, plan underground cable routes, and determine pole placement.
• Review SAP for new customer contacts.
• Attend weekly scheduling meetings and team coordination sessions.

• High School Diploma or GED required.
• 1–2+ years of professional work experience.
• Basic electrical knowledge or background.
• Previous experience in electrical or utility fields preferred.
• Proficiency in Microsoft Office.
• GIS or AutoCAD experience is a plus.
• Strong verbal and written communication skills.
• Strong organizational and project management skills.

One Tech Engineering is searching for an Electrical Engineer for a position located in Maple Grove, Minnesota. The Electrical Engineer will lead like-for-like replacements and upgrades of substation equipment, including breakers, switches, transformers, relays, bushings, and surge arresters.

The candidate must be a US citizen or hold a green card. The candidate should have a Bachelor’s degree and 5+ years of relevant electrical engineering experience.

• Perform troubleshooting and technical evaluations of substation equipment and systems.
• Initiate maintenance and upgrade projects and develop project scopes.
• Order materials and prepare material requisitions.
• Develop and adjust designs as needed for brownfield projects (no greenfield design work).
• Coordinate with construction teams to execute field work safely and efficiently.
• Manage project schedules and track progress to completion.
• Ensure clear communication with all stakeholders, including construction teams and substation maintenance personnel.
• Deliver scoped work packages, provide field coordination, and support the completion of replacement and maintenance activities.

• 5+ years of relevant electrical engineering experience.
• Bachelor’s degree in Electrical Engineering is required.
• Strong knowledge of substation equipment with field troubleshooting experience, or a demonstrated willingness to work in the field.
• Familiarity with brownfield substation replacement and maintenance workflows.
• Experience coordinating with stakeholders and initiating projects, including material ordering.
• Proficiency in SAP and ProjectWise.
• Field experience in substations and basic familiarity with PLC/logic programming is preferred.
• Professional Engineer (PE) license is preferred.

One Tech Engineering is searching for a Project Manager for a position located in St. Paul, Minnesota. The Project Manager is responsible for cross‑functional project coordination, including vendor management and overseeing tasks within engineering‑related project work.

The candidate must be a US citizen or hold a green card. The candidate should have 3-5 years of Project Management experience, preferably in the utility industry

• Coordinate cross-functional project activities, including collaboration with engineering teams and external vendors.
• Manage project schedules, milestones, and deliverables to ensure timelines and objectives are met.
• Perform site visits as needed and interact with multiple internal teams and stakeholders.
• Oversee vendor coordination to ensure scope, quality, and project requirements are fulfilled.
• Track project progress and provide updates to ensure alignment across all functional groups.
• Support engineering-related project work through effective communication and task management.

• 3–5 years of Project Management experience, preferably in the utility industry.
• Previous experience with vendor management.
• Strong proficiency in Microsoft Excel.
• Excellent written and verbal communication skills.
• Strong problem-solving and analytical abilities.
• Experience with Primavera P6 is preferred.
• PMP certification is a plus.

One Tech Engineering is searching for a Project Assistant for a position located in Chesterfield, Missouri. The Project Assistant will proactively and regularly communicate with the project team, client representatives, vendors, suppliers, and subcontractors on project development and execution.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a high school diploma or equivalent, and a minimum of 3 years’ relevant experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Assist with identifying, entering, monitoring, and analyzing the progress of key project needs, deliverables and milestones for the project team using internal software, and support the presentation of monthly progress reports covering action items and progress updates.
• Assist with entering project scheduling information.
• Assist with monitoring submittal log and RFIs in construction management software and expediting responses for subcontractors from the internal design team.
• Assist with organizing a file management system to properly monitor project progress.
• Assist with creating new projects using construction management software and provide daily reports and other workflows to be assigned to project and management leadership.
• Coordinate the required training programs and records for project personnel in conjunction with the corporate training department and project requirements to ensure compliance.
• Resolves questions regarding the project; research and provide appropriate answers.
• Coordinates between engineering teams to assemble client based studies and reports and ensures all deliverables are assembled, reviewed, and delivered per the schedule.
• Identifies Project and Department related opportunities for process improvement and innovation.

• High School Degree and a minimum of 3 years relevant experience.
• Or an Associate’s degree and a minimum of 2 years relevant experience.
• Or a Bachelor’s and some relevant experience.
• Previous analytics background is preferred.
• Proficient in Microsoft Word, Excel, Access and PowerPoint required. 
• Power BI \experience is a major plus.

One Tech Engineering is searching for a Construction Project Manager for a position located in Akron, Ohio. The Construction Project Manager will be responsible for managing the construction project safety, quality, schedule, cost control, contracts, subcontractors, suppliers, proposals, estimates, documentation turnover, client relations/management, field staff and other duties required to execute EPC, Construction Management, Construction, and Program Management projects.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have at least 7 years of relevant project management experience in the construction industry.

Local candidates preferred or open to relocation. This is not a remote position.

• Responsible for the oversight of day-to-day construction activities and the successful execution of a single or multiple projects simultaneously.
• Provide direction and participate in project planning, scheduling, estimating, cost development, and establishing critical project objectives.
• Develop new and manage existing client relationships while interfacing with the client for proposal and project related items.
• Participate in internal and external project risk reviews and consult with Legal Department as required.
• Negotiate prime contracts, CM contracts, subcontracts, and change orders.
• Participate in risk review process.
• Implement assigned sections of the Project Execution Plan, including construction execution, construction quality assurance plan, safety & health plan, subcontracting plan, project staffing plan, organization chart, and procurement plan.
• Develop construction staffing plans and train project teams, coordinate activities of multiple global practices/disciplines, and facilitate the efficient cost-effective utilization of staff while adhering to contractual and performance requirements.
• Oversee the development of the project plan for site layout, mobilization and demobilization and support implementation.
• Verify all applicable project permits are secured in accordance with the project requirements.
• Direct and oversee the downstream request for proposal (RFP) and bid process and prepare detailed scope of work documents for subcontractor and client contractor contracts, including bidder development, prequalification, evaluation, award recommendation, and selection.
• Review, approve, and communicate internal and external reports including project budgeting, project cash flow forecast, and project status reports.  Present reports to Project Manager, Program Manager as well as internal and external executive management as required.
• Collaborate with engineering team to establish the development and distribution of engineering deliverables per project schedule and requirements.
• Develop processes and manage downstream contract administration including request for information (RFI’s), submittals, change management, contract closeout, documentation, and claims mitigation.
• Oversee Prime Contract, subcontractor, and client contractor invoicing process.
• Coordinate and facilitate client, supplier and company commissioning and startup teams as needed.
• Implement, audit, and oversee project documentation.
• Implement process for confirming project and subcontractor insurance, taxes/duties, licensures, and bonding requirements.
• Perform project safety, quality, progress and financial audits and assessments as required.
• Oversee and participate in the project-specific non-conformance reporting process.
• Responsible for facilitating project cost reporting, scheduling, work breakdown structure establishment, project set-up and closeout, and field progress tracking specific to construction and construction related activities or program level activities as required.
• Develop and oversee the materials receiving and management process, including inventory control, receipt of goods, storage, and transportation as required.
• Review contract documents with field staff to verify compliance of subcontractors and client contractors, safety and health requirements, quality, and schedule.
• Direct the project turnover documentation, warranty administration, project closeout, and recordkeeping/retention processes and procedures.
• Support communication with governmental, industry, and public entities on project-related matters.
• Review construction field reports.
• Provide mentorship and training to interns, construction coordinators, craft supervision, and assistant construction project managers.
• Provide performance feedback for each project team member as requested to their respective Department Managers.
• Manage community and building trades relationships.
• Develop and implement project labor agreements with building trades as required.
• Onboard craft/field supervision as required.
• Manage composite crew rates to determine labor and equipment costs.
• Manage staffing on projects.
• Manage labor burdens including craft classifications, benefits and labor laws.
• Maintain accurate craft classifications and craft progression records.
• Uphold craft competency and training standards.
• Estimate, forecast and manage craft install unit rates.
• Manage earned value, schedule, change management and cost metrics.
• Mentor and foster craft training and identify advancement opportunities.
• Manage construction equipment to ensure adequate inventory to complete projects.
• May be assigned to a project site based on project requirements.
• Comply with company policies and procedures.
• Performs other duties as assigned
• Complies with all policies and standards

• Bachelor's Degree in Construction, Construction Management, Engineering, or a related field and 7 years of relevant project management experience in the construction industry.
• Applicable experience may be substituted for the degree requirement
  Excellent computer skills and proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint, and Access). 
• Experience with document control, scheduling, cost control, and project management software is preferred.

One Tech Engineering is searching for a Transmission and Distribution (T&D) Superintendent for a position located in Greensburg, Pennsylvania. The Transmission and Distribution Superintendent will be responsible for field operations on assigned project(s) in order to achieve safe, timely and profitable completion of each project.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree and 7 years of construction management experience or craft supervision experience on T&D projects.

Local candidates preferred or open to relocation. This is not a remote position.

• Plans, organizes, and supervises specific portions of construction work for an assigned area of a construction project.
  Responsible for the construction scheduling of the T&D related activities of the subcontractors to confirm the completion of contractual construction activities.
• Maintains continuity of job progress and maximizes efficiencies related to the assigned area.
• Responsible for the oversight of the following project work activities: high voltage transmission lines, transmission line steel and wood structures, drilled piers, spread footings, grounding, environmental requirements, substation equipment, substation structures, substation electrical, and substation controls.
• Responsible for overall supervision of construction effort, which includes: safety, productivity of crafts, efficient use of materials and equipment, materials management, scheduling, engineering, and contractual performance of the project.
• Responsible for subcontractor contractual compliance on designated T&D construction related activities.
• Build effective client and subcontractor relationships. 
• Interface with client representatives, A/E representatives, and other contractors.
• Collaborate with project management to develop and implement project procedures, working documents, and standards.
• Authorize purchase requisitions, field design change requests, etc., under supervision of Construction Manager and Project Manager.
• Responsible for overall project safety. 
• Reviews and audits site specific safety documentation, including Pre-Task Analysis (PTAs) and Task Safety Observations (TSOs) on a regular basis.
• Complete daily field reports and take daily pictures to document construction progress.
• Assess future work activities and identify any concerns with work plans by utilizing subcontractors 3-week look ahead report.
• Develop a marked-up and as-built set of drawings to produce the record set documents, and answer RFIs with assistance from the Assistant Project Manager or Field Engineer.
• Direct and manage subcontractor as necessary to comply with the established project schedule, and track and verify subprogress on an installed quantity and work hour basis.
• Verify material deliveries meet specifications and are being stored properly, and required preventative maintenance and/or temporary heating is being performed by the subcontractor (this potentially is coordinated with the Materials Manager).
• Coordinate with the QA/QC Manager to verify all welders on site are qualified to weld on the project.
• Witness all equipment setting and alignment.
• Walk down all systems prior to, during, and post hydrostatic testing to verify compliance with drawings and specifications and signing off on completed system testing and restoration.
• Develop punch lists of items out of compliance or not completed.
• Verify the most current drawing revisions are being used in the field.
• Understand and execute the project scope and any changes that develop.
• Ensure field change orders are executed.
• Oversee craft supervision and project staffing as required.
• Provide oversight of project site material and tool management.
• Responsible for the daily field construction of an individual project in accordance with the established policies, procedures, systems, and requirements approved by the company.
• Supervises and directs the daily efforts of the physical construction of the project through daily coordination of all field activities, subcontractor direction, and code/specification compliance.
• Read, interpret, and understand isometric drawings, structural drawings, and P&ID's.
• Performs other duties as assigned
• Complies with all policies and standards

• Bachelor’s Degree and 7 years of construction management experience or craft supervision experience on T&D projects.
• Or an Associate Degree and 9 years’ construction management experience or craft supervision experience on T&D projects.
• Or a High School Diploma/GED and 11 years of construction management experience or craft supervision experience on T&D projects.
• Must have excellent communication skills, strong leadership skills, and a strong safety background.  
• Computer proficiency in Microsoft Suite.  
• Must be able to meet the company's driving requirements.

One Tech Engineering is searching for a Project Controls Specialist Assistant for a position located in Maitland, Florida. The Project Controls Specialist Assistant will support all aspects of project controls and reporting, including project change management, cost control, schedule development, and schedule control.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in Engineering, Construction Management, or a related field. 

Local candidates preferred or open to relocation. This is not a remote position.

• Assist with developing, implementing and maintaining a cost management reporting data warehouse to produce valuable program controls reports and data.
• Perform project planning and scheduling tasks.
• Coordinate project schedules and assist with the development of scheduling reports.
• Coordinate project set-up in the Enterprise Planning & Controls software.
• Review data, maintain logs, and run reports in the Enterprise Planning & Controls software or other tools.
• Validate Work Breakdown Structure (WBS) and Cost Breakdown Structure (CBS).
• Perform budget tracking against Purchase Orders or Subcontracts.
• Assist with upstream (prime contract) / downstream (PO & subcontract) change orders.
• Document changes to cost reports or forecasts.
• Assist with the development of cash flow.
• Assist with the development of Level 1, Level 2, and Level 3 schedules.
• Create diagrams in Microsoft Visio.
• Apply logic ties within the schedule.
• Document schedule progress.
• Perform resource loading of a schedule.
• Develop an earned value tracking document.
• Retrieve, review and distribute pre-programmed scheduling reports from P6 and SAP along with back-up documentation.
• Integrate data from one program to another.
• Assist quality checks and inspections on project controls deliverables.
• All other duties as assigned.

• Bachelor's degree in Engineering, Construction Management, or related field. 
  Applicable experience may be substituted for the degree requirement. 
• Experience with Oracle Primavera P6, SAP cost and schedule, and EcoSys.
• Ability to work independently, think creatively and analytically, and make quick and sound decisions.
• Excellent written and verbal communication skills.
• Proficient with Microsoft Office.
• Experience with queries and Power BI.
• May be required to obtain an OSHA 10-hour safety certification.
• Willingness to travel or accept long term field assignments.

One Tech Engineering is searching for a Project Manager for a position located in either St. Paul, Minnesota, or Denver, Colorado. The Project Manager will support the Gas Transmission Project Management team in managing projects from execution through closeout.

The candidate must be a US citizen or hold a green card. The candidate should have at least 5 years of relevant experience in the natural gas or utility industry (midstream, upstream, downstream, or public utility).

• Manage all phases of projects, including engineering, permitting, construction, and closeout.
• Oversee pipeline pressure test replacements, new pipeline builds, and service installations to neighborhoods and developers.
• Manage regulator (reg) station rebuilds and relocations due to road, infrastructure changes, or mandated requirements.
• Coordinate new business projects and mandated pipeline relocations.
• Oversee the RTU (Remote Terminal Unit) program, including prioritization, forecasting, contractor coordination, and execution.
• Develop, manage, and monitor project budgets, schedules, and forecasts.
• Ensure projects are executed safely, on time, and within budget.
• Serve as the primary point of contact for internal and external stakeholders throughout the project lifecycle.
• Identify and mitigate project risks, resolving issues to maintain project progress.
• Ensure compliance with all regulatory and company standards.

• Minimum of 5 years of relevant experience in the natural gas or utility industry (midstream, upstream, downstream, or public utility).
• Construction-based project management experience preferred.
• Engineering background preferred but not required.
• PMP (Project Management Professional) certification is a plus.
• Strong verbal and written communication skills.
• Advanced proficiency in Microsoft Excel.

One Tech Engineering is searching for a Project Coordinator for a position located in Minneapolis, Minnesota. The Project Coordinator will manage high-volume, repetitive billing tasks on a daily basis with accuracy and efficiency.

The candidate must be a US citizen or hold a green card. The candidate should have a few years of customer service or customer-facing experience.

• Utilize Microsoft Excel (including advanced functions) and Microsoft 365 Office applications to support billing and reporting tasks.
• Process and track work orders and purchase orders (POs) using SAP.
• Maintain consistent communication and follow-up with Project Managers (PMs) to ensure timely updates and issue resolution.
• Participate in weekly vendor meetings to coordinate activities and address concerns.
• Investigate and resolve discrepancies related to work orders and purchase orders.
• Collaborate regularly with job runners, PMs, and fellow coordinators to ensure smooth operations.
• Drive resolution of PO and work order issues through proactive research and communication.

• Previous customer service or customer-facing experience.
  
• Experience working with work orders and purchase orders.
• SAP experience is preferred.
• Proficient in Microsoft Office 365, with a strong emphasis on Excel.
  
• Strong communication skills.
  
• Excellent organizational skills.
• Familiarity with Power BI within Microsoft is nice to have.

One Tech Engineering is searching for a Distribution Outage Coordinator for a position located in Minneapolis, Minnesota. The Distribution Outage Coordinator will be responsible for writing and coordinating electrical switch plans as well as writing procedures.

The candidate must be a US citizen or hold a green card. The candidate should have 5+ years’ experience as a trouble man/lineman.

• Schedule, coordinate, and prepare electric distribution switching procedures for construction and maintenance departments, ensuring adherence to all safety and switching policies and guidelines.
• Write detailed switching procedures and coordinate all related activities with the Control Center.
• Review upcoming work to determine which switch plans need to be developed in the coming days, prepare and distribute them for review, and incorporate feedback as needed.
• Obtain necessary approvals and ensure switch plans are properly scheduled.
• Collaborate closely with the Control Center during execution, hand off approved plans, and follow up on any questions or clarifications they may have.

• Minimum of 5 years of experience as a Troubleshooter or Lineman.
• Strong understanding of electric distribution systems and field operations.
• Proven ability to work collaboratively with others and effectively coordinate and schedule work activities.
• Experience with Oracle NMS is preferred.
• Excellent communication and interpersonal skills.

• Responsible for recognizing, monitoring, and making recommendations to correct workplace safety hazards through on-site audits, consulting, ergonomic assessments, and interventions according to OSHA and other regulatory agencies; and collaborating on safety policy development and training.
• Conduct site safety orientations.
• Participate in Pre-Job Safety Reviews and project planning to ensure successful and safe execution of work tasks.
• Provide coaching to employees on safety practices.
• Conduct a weekly ‘all hands safety meeting’.
• Manage all hot work permitting.
• Oversee all incident investigations.
• Generate all required documentation in SiteDocs.

• At least 5+ years safety oversight experience for high voltage projects
• Previous Journey/lineman, journeyman electrician experience a plus
• Previous experience working with utility contractors, and site personnel.
• Certified Utilities Safety Professional certification
• Working knowledge of OSHA Compliance.
• Proficient with Microsoft office; Spreadsheets in Excel, Experience with Eco Online.

One Tech Engineering is searching for a Project Controls Cost Analyst for a position located in Akron, Ohio, or Greensburg, Pennsylvania. The Project Controls Cost Analyst will work with 5-6 project managers concurrently to support projects in various phases of design and construction.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in Engineering, Construction Management, or Business, and 4 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Develop, implement, and maintain external and internal cost reports, cash flows and forecasts.
• Report accurate updates to cost reports or forecasts.
• Responsible for ensuring quality checks and inspections on project controls deliverables.
• Ability to compare schedule to financial data to ensure consistency of project timeline.
• Ability to integrate schedule data and other data sources in excel via formulas, pivot tables, macros, etc.
• Analyze project controls reports, present findings and provide recommendations to the project controls team.
• Ensure budget tracking against Purchase Orders or Subcontracts.
• Responsible for the review of upstream (prime contract) / downstream (PO & subcontract) change orders.
• Manage integrated data from one program to another.
• Responsible for ensuring quality checks and inspections on project controls deliverables.
• Serves as a point of contact for technical questions from APM's, PM's, Lead Engineers, or Construction staff.
• All other duties as assigned.

• Bachelor's degree in Engineering, Construction Management or Business (Accounting, Finance, etc.) from an accredited program.
• A minimum of 4 years’ related experience.
• Ability to work independently, think creatively and analytically, and make quick and sound decisions.
• Excellent written and verbal communication skills.
• Excellent interpersonal skills.
• Proficient with Microsoft Office.
• Experience with SAP preferred.
• Strong analytical and problem-solving skills.
• Ability to travel.
• Valid driver’s license required.

One Tech Engineering is searching for a Senior Civil Designer for a position located in Kansas City, Missouri. The Senior Civil Designer will lead various phases of planning, proposal preparation, site evaluations, analytical designs, report preparation, specifications, and preparation of construction documentation and environmental plans as part of a project team. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a bachelor’s degree in drafting technology or related field and 13 years’ related experience.

Local candidates preferred or open to relocation. This is not a remote position.

Senior Civil Designer Responsibilities:

• Lead various civil project designs including site design, land development, roads, storm drainage systems, storm water management facilities, water and sanitary sewer utility design, sediment and erosion control, and traffic control, airports, and facility design.
  
• Lead drawing production work including problem analysis, design layout and calculations on non-routine assignments of substantial variety and complexity.
  
• Lead a variety of assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components and refining rough sketches.
  
• Lead the quality review of designs or sketches and mark-ups on ongoing projects.
  
• Present reports, maps, drawings, tests, and other topographical and geologic data to plan design projects.
  
• Interpret design codes and specifications related to design requirements.
  
• Lead design drawings within scope, budget and schedule.
  
• Quality review volume calculations for excavation, dredging, and upland site grading.
  
• Incorporate and approve schedules, budgets and project criteria into civil design and layouts for project financial goals.
  
• Organize and maintain all revisions of project drawings, plot files and project-related information in a logical and well-structured manner.
  
• Train, mentor, and develop staff members.
  
• Participate in marketing and client development meetings.
  
• Responsible for the civil design QA/QC process.
  
• Performs other duties as assigned.
  
• Complies with all policies and standards.

• Bachelor’s Degree in drafting technology or related field and 13 years of related experience.
  
• Or an Associate Degree and 14 years of related experience.
  
• Or 15 years progressive detailing and design experience. 
  
• Field experience is desirable.
  
• Advance understanding of design software such as: AutoCAD, Civil 3D, MicroStation, and Excel to develop the design deliverables.
  
• Advance knowledge in design, calculations, and design systems.
  
• Advance knowledge in the theory and practices of civil discipline; competent in the fundamental concepts of other disciplines as they relate to the assigned discipline; and capable of operating related discipline design software necessary to execute production tasks.
  
• Work collaboratively with others (Project Managers, Engineers and Designers) in a multi-discipline project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
  
• Excellent written & verbal communication skills.
  
• Excellent analytical and problem-solving skills, and attention to detail.

One Tech Engineering is searching for a Civil Designer for a position located in Kansas City, Missouri. The Civil Designer will perform various phases of planning, proposal preparation, site evaluations, analytical designs, report preparation, specifications, and preparation of construction documentation and environmental plans as part of a project team

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in drafting technology or a related field and 7 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

Civil Designer Responsibilities:

• Design civil engineering projects including site design, land development, roads, storm drainage systems, storm water management facilities, water and sanitary sewer utility design, sediment and erosion control, and traffic control, airports, and facility design.
• Develop drawings for production work including problem analysis, design layout and calculations on non-routine assignments of substantial variety and complexity.
• Execute variety of civil design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components and refining rough sketches.
• Execute changes to designs or sketches and mark-ups on ongoing projects.
• Analyze reports, maps, drawings, tests, and other topographical and geologic data to plan and design projects.
• Responsible for incorporating design codes and specifications related to design requirements.
• Review design drawings for quality assurance within scope, budget and schedule.
• Report volume calculations for excavation, dredging, and upland site grading.
• Review schedules, budgets and project criteria into civil design and layouts.
• Responsible for revisions of project drawings, plot files and project-related information storage in a logical and well-structured manner.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor’s degree in drafting technology or related field and 7 years related experience.
• Or an Associate’s Degree and 8 years related experience.
• Or 9 years of progressive detailing and design experience.
• Expert understanding of design software such as: AutoCAD, Civil 3D, MicroStation, and Excel to develop the design deliverables.
• Expert knowledge in design, calculations and design systems.
• Expert knowledge in the theory and practices of civil discipline; competent in the fundamental concepts of other disciplines as they relate to the assigned discipline; and capable of operating related discipline design software necessary to execute production tasks.
• Ability to work collaboratively with others (Project Managers, Engineers and Designers) in a multi-disciplinary project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
• Excellent written & verbal communication skills.
• Strong analytical and problem-solving skills, and attention to detail.

• Develop and maintain comprehensive project schedules for entire project lifecycles.
• Manage multiple projects simultaneously, including large-scale capital projects.
• Collaborate with PMs and departments (land rights, permitting, engineering, supply chain) to gather updates.
• Ensure schedules reflect accurate progress and dependencies across entities.

• 10+ years of scheduling experience with large-scale projects.
• Proficiency in Primavera P6 (P6 certification preferred).
• Hands-on experience creating, updating, and modifying schedules.
• Ability to manage multi-million to billion-dollar projects and complex scopes.
• Strong understanding of project management principles.
• Utility industry experience strongly preferred.
• Industrial or construction scheduling background is preferred.
• Familiarity with Microsoft Office Suite and SharePoint.

One Tech Engineering is searching for a Purchaser for a position located in Wallingford, Connecticut or Newton, Massachusetts. The Purchaser will perform purchasing responsibilities throughout the project life cycle which includes ordering materials, supplies, equipment, and the follow through with venders on shipment and delivery.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Supply Chain Management, Law or Construction related field and 3 years’ direct purchasing experience.

Local candidates preferred or open to relocation. This is not a remote position.

Purchaser Responsibilities:

• Prepare procurement documents and agreements.
• Perform commercial bid evaluations of supplier proposals and coordinate technical evaluations and recommendations to procurement manager and senior purchaser.
• Prepare purchase order documents and enter purchase order information into online purchasing application.
• Prepare expediting supplier submittals to support detailed design and delivery of equipment and material to support construction.
• Prepare front-end documents including prime agreement flow downs.
• Source and qualify potential suppliers to provide required goods and services.
• Communicate and address procurement issues with appropriate parties, including management.
• Compile procurement and expediting status reports.
• Prepare equipment, materials, and subcontracts forms and reports.
• Compile "Request for Proposal" (RFP) documents including documents/drawings/specifications provided by the internal client.
• Prepare procurement packages to engineering specifications.
• Receive, log, distribute, tabulate, and analyze proposals.
• Make recommendations for purchasing needs for contracts.
• Responsible for updating Project Procurement Status and Material.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor's Degree in Supply Chain Management, Law or Construction related field and 3 years direct purchasing experience.
  
• Applicable experience may be substituted for the degree requirement.  
  
• Project purchasing experience preferred.
  
• Oracle Financial R12 software experience preferred.
  
• Excellent written and verbal communication skills.
  
• Excellent interpersonal skills.
  
• Proficient computer skills (e.g. Microsoft Office Suite)
  
• Strong attention to detail, facilitation, team building, collaboration, organization and problem solving skills.
  
• Experience in devising new approaches to purchasing problems encountered.
  
• CPM Certification or CPSM Certification is preferred.
  
  

One Tech Engineering is searching for an Industrial Cybersecurity Consultant for a position located in Glen Allen, Virginia. The Industrial Cybersecurity Consultant will independently execute significant portions of projects addressing Information Technology (IT) and Industrial Control System security. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have Bachelor’s degree in Cybersecurity, Computer Science, Computer Engineering, Electrical Engineering, or a related technical field and at least 3 years of related/relevant experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Supports the execution of projects consisting of network penetration testing, web application security testing, cybersecurity vulnerability assessments, secure system design and integration, and/or development of cybersecurity programs at client sites across the U.S and Canada utilizing the National Institute of Standards and Technology (NIST) Cybersecurity Framework (CSF), NIST Risk Management Framework (RMF), and other industry or data specific compliance frameworks and regulations.
• Execute the planning, design, development and implementation of technical controls, procedures and policy associated with cybersecurity compliance and/or regulatory standards.
• Maintain highest level of integrity, protecting the confidentiality and security of all client and project information.
• Identify and diagnose operational issues and implement design alterations to address these issues.
• Conduct network penetration tests and vulnerability assessments of IT and Operational Technology (OT) networks, for both compliance and security purposes.
• Perform detailed, post event analysis of unusual events, and direct needed procedure or process changes in response.
• Pursue, obtain, and maintain industry recognized IT certifications related to cybersecurity such as ethical hacking, network engineering, Industrial Control System (ICS), Supervisory Control and Data Acquisition (SCADA), risk management, and others as necessary.
• Resolve technical issues, analyze implications to the client's business, and be able to communicate them with applicable stakeholders within the business.
• Develop policies & procedures for secure process control network design, technical and design recommendations for the implementation of firewalls and other network security and compliance controls.
• Compiles technical documentation of network traffic as well as firewall services/solutions including explanations and diagrams.
• Work collaboratively with other groups and divisions inside the company.
• Complies with all policies and standards.
• Performs other duties as assigned.

• Bachelor’s degree in Cybersecurity, Computer Science, Computer Engineering, Electrical Engineering, or a related technical field, and a minimum of 3 years of related/relevant experience.
• Advanced knowledge of security principles and firm knowledge of cybersecurity technologies, as well as industry-recognized certifications. 
• Experience with cybersecurity vulnerability assessments, penetration tests, and the tools/techniques involved in both. 
• Experience in the capabilities and/or configuration of cybersecurity controls, specifically those relating to firewalls, access control, authentication, anti-virus/anti-malware, patching, and logging. 
• Advanced knowledge of control systems utilized by utilities, manufacturing, oil and gas, transportation, smart buildings, and cities. 
• Strong written and oral communication skills. 
• Strong analytical and critical thinking skills. 
• Ability to operate under pressure and under tight deadlines, to operate in on-site industrial, corporate, and government work. 
• Demonstrate capability to make sound decisions based on good security practices and principles. 
• Demonstrate an understanding of business principles and operational security practices specific to engineering and/or security consulting. 
• Knowledge and/or experience with corporate policies and procedures. 
• Strong technical writing skills.
• Knowledge and experience with modern and legacy computer networking and telecommunications. 
• Experience with physical cabling for network communications and control system Input/Output. 
• Ability to obtain and maintain access to current and future client sites.

One Tech Engineering is searching for a Field Operations Manager for a position located in Wallingford, Connecticut; Newton, Massachusetts; Conshohocken, Pennsylvania; or Morristown, New Jersey. The Field Operations Manager will be responsible for the hiring, onboarding, resource assignment, mentoring, development, performance management, direction, and leadership of the Field Operations Department within the Northeast Region (NER) Construction Global Practice. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have 11 years of related professional experience in field construction.

Local candidates preferred or open to relocation. This is not a remote position.

• Adhere to and ensure the Field Operations Department adheres to company safety programs, training, and policies, as well as collaborate with the project team to manage the Safety & Health performance of project team members, contractors, and others as required.
• Support the implementation of new safety initiatives in line with the company’s Live Safer objective.
• Become LOTO certified through the company's LOTO certification program, and support certification of other qualified superintendents and site managers.
• Coordinate with Project Managers and Department Managers on Field Operations resource needs and lead the assignment of qualified Field Operations resources to EPC and Program Management projects.
• Coordinate with corporate construction leadership on assignment of Field Operations staff to project assignments.
• Coordinate with NER Construction Department Managers and the recruitment team to recruit, hire, and retain staff. 
• Lead interviews for Superintendents, Site Managers and Section Managers within the Field Operations department.
• Serve as Site Manager, including all responsibilities of a Site Manager, on strategic/critical projects.
• Support emerging needs for Field Operations on projects throughout the Northeast region.
• Lead onboarding, development, training, goal development, mentoring, and performance appraisals for the department.
• Interpret or establish policies and procedures, in collaboration with safety and quality departments.
• Demonstrate creativity, foresight, and judgment in anticipating and solving problems.
• Promote Global Practice and Department capabilities and support business development efforts, including client-facing meetings and presentations.
• Advance and develop Department tools and workflows to increase the efficiency of project execution.
• Assign work and review staff performance with teams to ensure quality and efficient, cost-effective utilization of staff.
• Recruitment, development, training, and retention of Field Operations personnel.
• Provide leadership, guidance, and instruction to the department.

• 11 years of related professional experience in field construction, or 7 years of related professional experience and a Bachelor's Degree in engineering, architecture, construction, or a related degree from an accredited program.
• 15 years of professional experience in construction management, specifically overseeing industrial construction projects, is preferred.
• Previous leadership, management, section manager, site manager or construction manager experience.
• Must demonstrate excellent oral and written communication skills, strong interpersonal skills, and the ability to clearly and effectively present complex information to all levels of employees, management, and clients. 
• Must be competent in the use of computer software (i.e., Microsoft Word, Excel, PowerPoint).
• Must be willing to travel.

One Tech Engineering is searching for a Senior Transmission Engineer for a position located in Houston or Austin, Texas. The Senior Transmission Engineer will lead the design of complex transmission line projects.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in Civil Engineering or a related degree from an ABET-accredited program and 7 years of transmission engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Lead transmission design of projects from the conceptual phase through design completion for project needs and requirements that are set forth by the project managers including EFM, Conductor Sizing, Induction, Impedance, Losses and Voltage Drop design.
• Prepare transmission equipment: packaged equipment specifications and data sheets, Request for Qualifications (RFQ's), technical bid summaries, and purchase recommendations.
• Lead economic conductor selection studies, lightning performance and grounding calculations/studies.
• Lead calculations for required electrical clearances based on NESC or other applicable codes and resources. Lead in the communication of the interpretation and application of necessary NERC, FERC and regional requirements and standards.
• Review transmission equipment vendor drawings; data interface with suppliers, clients other engineering disciplines, detailers, designers.
• Participate in development of project schedule, scope, budget staffing planning and construction planning.
• Responsible for effective management of change orders.
• Applies expert knowledge of commonly used transmission concepts, practices, codes and procedures within the transmission engineering services industry.
• Applies knowledge and experience to complex projects, find non-standard design solutions.
• Quality review production drawings for a variety of projects and project related data as required by the project managers to verify corrections are made within multiple CAD related software.
• Quality review the construction administration including coordination with field personnel to resolve design related installation issues, calculations, field inspections and testing of transmission systems.
• Leads field inspections, installation, measurements or calculations for public and private clients.
• Prepare and present technical reports for clients and industry publications.
• Build effective relationships with existing clients, customers and contractors and develop new business opportunities.
• Responsible for ensuring customer satisfaction goals and expectations are met.
• Participate sales and marketing efforts and identify key pursuits.
• Lead the development of cost proposals and qualification statements to achieve stated targets and standards for financial performance.
• Prepare and present project budgets and cost estimates.
• Report project performance.
• Provide leadership, guidance and instruction to the transmission engineering practice.
• Mentor and guide less experienced engineers.
• Responsible for QA/QC process adherence.
• Responsible for effective communication with other engineering disciplines.
• Responsible for compliance with company and site safety policies.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor's Degree in Civil Engineering or related degree from an ABET accredited program and 7 years of transmission engineering experience.
• Bachelor's Degree in Civil or related Engineering Technology from an ABET accredited program and successful completion of the Fundamentals of Engineering (FE) exam and 7 years of transmission engineering experience.
• Master's Degree in Engineering and 6 years of transmission engineering experience.
• Expert knowledge in standard engineering techniques and procedures.
• Strong knowledge of transmission design codes and computer skills (e.g. AutoCAD, MicroStation, BIM (Revit), Civil 3D, PLS, PLS-CADD, RISA-3D, MathCADD), and/or hydraulic, hydrologic, pavement, transmission analysis programs.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Strong computer skills (e.g. Microsoft Office Suite).
• Excellent written and verbal communication skills.
• Experience with leading the discipline design for large projects and delegating work tasks to team
  members.
• Ability to lead the execution of work and resolve issues in a team environment.
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Ability to perform quality reviews for detailed engineering documents and specifications.
• Ability to travel.
• Professional Engineer (PE) License preferred.

One Tech Engineering is searching for a Transmission Project Manager for a position located in Austin, Texas. The Transmission Project Manager will manage, direct, and coordinate all aspects of work related to overhead transmission

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in engineering or related field and 7 years of related experience, including 3 or more years of experience managing engineering projects in the Transmission & Distribution industry.

Local candidates preferred or open to relocation. This is not a remote position.

• Provide overall management of projects from concept to completion, including siting, environmental, permitting, planning, estimating, engineering, right-of-way acquisition, project controls, bid phase services, procurement, constructability reviews, material management, construction management, and closeout.
• Leverage existing client relationships, create new client relationships, and focus on repeat work within each Account.
• Prepare proposals, assist in presentations, and participate in contract negotiations.
• Develop and monitor project schedules, manage scope, and control project costs.
• Own internal project financials (detailed, accurate project cost forecast and accruals), staffing, legal coordination, risk management, change management, and human resource issues.
• Serve as primary point of contact with client regarding efforts such as client coordination, strategic planning, master scope management, budget finances, subcontracting, project staffing, environmental compliance, facility support and schedule attainment.
• Manage all aspects of project communication.
• Develop and implement project policies and procedures, establish project controls systems and implement the project execution plan.
• Work closely with the Project Team to ensure deliverables and services are being provided to client’s satisfaction and that projects are following internal QA/QC guidelines.
• Report regularly on progress, cost and schedule metrics, procurement issues, safety or environmental concerns, design questions, potential impacts, and any issues requiring office support. Travel to client and project locations is expected.
• Support the development of the Transmission team by assisting with hiring, training, and mentoring.
• Direct and coordinate activities of several disciplines on a project of moderate scope or a combination of smaller projects.
• Travel to client and project locations will be expected.
• All other duties as assigned

• Bachelor's degree in engineering or a related field from an accredited curriculum.
• Minimum of 7 years of related experience, including 3 or more years of experience managing engineering projects in the Transmission & Distribution industry.
• Completion of a master's degree in a related field may be substituted for one year of experience.
• Professional Engineering (PE) registration preferred.
  Project Management Professional (PMP) certification preferred.
• Strong analytical and problem-solving skills.
• Excellent oral and written communication skills and interpersonal skills.
• Must have the ability to clearly and effectively present complex information to all levels of employees, management, and clients.
• Must have experience with the production of transmission design and construction documents.
• Requires knowledge and experience working with the NESC code, as well as other industry codes and standards.
• Must be capable of devising new approaches to problems encountered.
• Demonstrated success in project management which includes proposal development, contract negotiations, project planning, design team coordination & communication, budgeting, schedule management, and client coordination.
• Proven ability to develop business and establish relationships with clients.
• Must have ability to deal effectively with a wide variety of industry, government and public contracts on project-related matters.
• Excellent written & verbal communication skills.  Strong analytical and problem-solving skills.
• Ability to travel.
• Valid driver's license required.
• In addition, must meet standards to qualify for and maintain the Company's vehicle driving privileges as outlined in the Company's Motor Vehicle Safety Policy.

One Tech Engineering is searching for a Senior Automation & Controls Engineer for a position located in Atlanta, Georgia. The Senior Automation & Controls Engineer will lead and execute Automation and Controls Engineering design activities for minor to major scale Engineering, Procurement, and Construction (EPC) projects in food, consumer products, pharmaceutical, life science, aerospace and industrial facilities. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Controls, Electrical, Mechanical, or Chemical Engineering or a related degree from an ABET-accredited program, and successful completion of the Fundamentals of Engineering (FE) exam and 7 years of electrical engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

Senior Automation & Controls Engineer Responsibilities:

• Responsible for compliance with company and project site safety policies.
• Design responsibility for all Automation and Controls scope on the project.
• Leads a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design. 
• Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines.
• Responsible for leading and developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization. 
• Responsible for commissioning and startup of those design deliverables.
• Lead and prepare controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details.
• Lead the specification, design, and procurement activities for control panel and equipment vendors, manage vendor progression, and lead the Factory Acceptance Tests (FATs).
• Lead and prepare electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules.
• Determine process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves.
• Utilize knowledge of various technologies for selecting the appropriate controls application.
• Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project.
• Develop and manage verification of design, calculations, project studies and report preparation.
• Interfaces directly with offsite design office and coordinates and tracks execution of controls deliverables to that office.
• Responsible for leading and performing quality reviews of project design submittals and coordinating those reviews within the department.
• Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry.
• Interfaces directly with construction personnel in development of contracts and execution of work.
• Develops project estimates at each project phase through various software such as Proposal works, Integrated Architecture Builder (IAB), SIL Solver, Bluebeam, Excel, and Visio.
• Supports project manager in the development and tracking of automation and controls project budgets and expected progress.
• Works with clients and vendors directly in developing design. 
• Builds effective relationships with existing clients, customers and contractors and develop new business opportunities.
• Responsible for ensuring customer satisfaction goals and expectations are met.  
• Provides leadership, technical direction and development to Automation and Controls team members.
• Assists in the day to day allocation of resources to their projects.
• Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems.
• Responsible for leading the technical execution and team during onsite start-up and commissioning activities.
• Responsible for developing and submitting discipline change notices as needed to the project management team.
• Fully understands and can execute the EPC project approach.
• Work with our business development team to identify and develop key project and customer pursuits.
• Frequently attends and hosts client events.
• Develops business strategies for future projects.  Understands business needs and profitability factors.
• Reviews and develops engineering hour estimates and proposals for all phases of the project.
• Supports the interviewing and hiring process for new team members.
• Coordinates workload with the Automation and Controls Department Manager.
• Complies with all company policies and standards.
• All other duties as assigned.

• Bachelor’s Degree in Controls, Electrical, Mechanical, or Chemical Engineering or related degree from an ABET-accredited program and successful completion of Fundamentals of Engineering (FE) exam and 7 years of electrical engineering experience.
  EPC project and Automation 7 Controls experience preferred.
• Master’s Degree in Electrical Engineering and 6 years of electrical engineering experience.
• EPC project experience preferred.
• Expert knowledge in standard engineering techniques and procedures. Strong knowledge of electrical equipment design ANSI and IEEE Standards.
• Strong computer skills (e.g. Microsoft Office Suite).
• Excellent written and verbal communication skills.
• Experience with leading the discipline design for large projects and delegating work tasks to team members.
• Ability to lead the execution of work and resolve issues in a team environment.
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment.
• Strong attention to detail, facilitation, team building, collaboration, organization, and problem-solving skills.
• Ability to perform quality reviews for detailed engineering documents and specifications.
• Ability to travel. accredited program.
• Must have or be able to obtain a Transportation Worker Identification Card (TWIC).
• Professional Engineer (PE) License Preferred.

• Knowledge of applicable design standards covering Automation & Controls Design/Engineering, such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A.
• Experienced with a variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS).
• Experience in Rockwell and Siemens PLC platforms. 
• Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms is a plus.
• SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus.
• MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS.
• Machine safety risk assessment and required PL design compliance to ISO13849 is a plus.
• Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus.
• Experience with PlantPAX and PackML is preferred.
• Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired.

One Tech Engineering is searching for a Project Manager for a position located in Denver, Colorado. The Project Manager will lead engineers while executing highly technical, complex projects including drinking water treatment facility, pump station, and water storage tank design/construction.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in engineering, construction management or related degree, and 7+ years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

Project Manager Responsibilities:

• Provide leadership and guidance through all aspects of engineering projects from concept to completion, including overall safety, quality, engineering, procurement, construction, permitting, project controls, and public/community relations.
• Collaborate and coordinate with multi-disciplinary project teams to provide deliverables and services that meet internal QA/QC requirements and client expectations.
• Serve as the primary point of contact for clients throughout each project, building a relationship as a trusted partner as the project progresses.
• Develop and monitor project schedules, manage scope, and plan for the financial success of your projects.
• Plan, organize, and communicate project personnel needs to department management.
• Communicate project progress, cost and schedule metrics, design questions, and project challenges requiring additional support to department management.
• Provide performance feedback for project team members as appropriate.
• Work to proactively identify and position the company for upcoming projects and opportunities; utilize business development skills to lead proposals, win new projects, and increase existing client base.
• Leverage existing client relationships and focus on repeat work within each client account.
• Manage the review, negotiation, approval, and execution of prime contracts, subcontracts, and change orders.
• Be visible in the regional water and wastewater marketplace through leadership and participation in professional organizations.
• Provide guidance and industry feedback or trends to the water leadership team.

• Bachelor's degree in engineering, construction management or related degree from accredited program required.
• Minimum of 7 years of related experience (10 years preferred) in design engineering, including 3 or more years of experience managing engineering projects.
  Completion of a master's degree in a related field may be substituted for one year of experience.
• Previous consulting experience preferred.
• Professional Registration preferred.
• Demonstrated success in project management strongly preferred.
• Proven ability to develop business and establish relationships with clients strongly preferred.
• Prior experience on construction project sites or executing program management in the industries of aviation, commercial, energy, government, manufacturing, oil & gas, process, transmission & distribution, or water is preferred.
• Excellent written and verbal communication skills and strong interpersonal skills.
• Must have the ability to clearly and effectively present complex information to all levels of employees, management, and clients.
• Strong analytical and problem-solving skills, and attention to detail.
• Must be capable of devising new approaches to problems encountered.
• Ability to influence, lead and manage change thoughtfully and positively strongly desired.
• Ability to thrive in a fast-paced, demanding work environment, ability to work overtime on short notice.
• Excellent computer skills and proficiency using Microsoft Office.
• Ability to work collaboratively with others (owners, contractors, engineers, designers) in a multi-disciplined project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
• Strong experience with document control, scheduling, cost control and project management software.

One Tech Engineering is searching for an Energy & Utility Consulting Director for a position located in Brea, San Diego, Walnut Creek, or Los Angeles, California. The Energy & Utility Consulting Director will manage and provide expertise and professional development to a team of consultants and analysts in managing project quality, schedule, cost control, contracts, subcontracts, proposals, estimates, and client relations.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in engineering, business, or a related degree and 13+ years of relevant consulting experience.

Local candidates preferred or open to relocation. This is not a remote position.

Energy & Utility Consulting Director Responsibilities:

• Organize and direct consulting projects, including pursuit, negotiation, execution, cost, schedule, and quality of deliverables.
• Facilitate workshop sessions with senior-level client teams to understand requirements, identify needs, and develop actionable plans.
•  Anticipate client challenges and provide strategic, innovative, and impactful solutions.
• Communicate effectively with project personnel and department management, coordinating with internal and external subject matter experts to pursue and deliver consulting projects.
• Serve as the primary point of contact for all project-related communications and client interactions.
• Compile, distribute, and present status reports covering project progress, schedule, cost, and budget impacts to internal and external stakeholders.
• Demonstrate curiosity, continuous learning, and a willingness to take strategic risks to drive personal and professional growth.
• Establish project teams, coordinate activities across multiple disciplines, and ensure efficient, cost-effective utilization of staff.
• Provide performance feedback to personnel managers and contribute to the development of training curricula and materials for consultants and analysts.
• Foster diverse perspectives, opinions, and experiences within project teams.
• Oversee third-party vendors and subcontractors, including contracts, scope, schedule, budget, and identification of upselling or cross-selling opportunities.
• Solve complex and ambiguous problems using modern tools, technologies, and best practices to create clarity and momentum.
• Ensure timely processing of prime contract, subcontractor, and supplier invoicing in alignment with agreements.
• Provide managerial direction and work assignments to consultants and analysts.

• Bachelor's degree in engineering, business, or a related field from an accredited program.
  MBA preferred.
• Minimum of 13 years of relevant consulting experience.
• Excellent business acumen with proven success managing consulting engagements.
• Strong analytical skills with the ability to interpret large data sets quickly and efficiently.
• Ability to uncover customer needs, develop recommendations and deliver them persuasively.
• Expert facilitation, collaboration, organization, and problem-solving skills.
• Strong understanding of financial concepts.
• Excellent planning and analytical skills.
• Must demonstrate excellent oral and written communication skills; strong interpersonal skills; and the ability to clearly and effectively present complex information to all levels of employees, management, and clients.

One Tech Engineering is searching for an Electrical Engineer for a position located in St. Louis, Missouri. The Electrical Engineer will be responsible for substation engineering and consulting services for clients across the US and internationally.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in Electrical Engineering or a related degree and 3 years of electrical engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

Electrical Engineer Responsibilities:

• Develop proposals and scopes of work, including conceptual designs and execution plans.
• Prepare engineering cost estimates, labor estimates, and project schedules.
• Complete physical substation design such as yard layouts, plans, sections, grounding systems, lightning protection, control building arrangements, interior/exterior raceways, auxiliary AC/DC power systems, and bills of material.
• Perform protection and control (P&C) design, including panel arrangements, one-line/single-line diagrams, three-line diagrams, AC schematics, DC elementaries, equipment wiring, and relay panel wiring.
• Prepare calculations and technical reports for engineering studies (e.g., grounding, lightning protection, AC/DC load studies).
• Develop equipment specifications for procurement and support factory acceptance testing (FAT).
• Coordinate design activities with cross-functional teams (Civil/Structural, Networks, Transmission Line, etc.).
• Provide guidance, mentorship, and technical support to junior team members.
• Collaborate and communicate regularly with clients and external stakeholders.
• Perform quality assurance reviews of designs prepared by engineers and designers.
• Provide short-term field support during construction phases.
• Support business development and marketing efforts as needed.
• Potential additional involvement in relay settings, 3D/intelligent design, or participation in industry/professional technical committees.
• Perform other duties as assigned.

• Bachelor's Degree in Electrical Engineering or related degree from an ABET-accredited program and 3 years of electrical engineering experience, consulting preferred.
• Or a Bachelor's Degree in Electrical or related Engineering Technology from an ABET-accredited program and successful completion of Fundamentals of Engineering (FE) exam and 3 years of electrical engineering experience, consulting preferred.
• Or a Master's Degree in Electrical Engineering and 2 years of electrical engineering experience, consulting preferred.
• Strong knowledge in standard engineering techniques and procedures.
• Excellent written and verbal communication skills.
• Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.
• Proficient in standard engineering techniques and procedures.
• Strong computer skills. (e.g. Microsoft Office Suite)
• Strong computer skills include AutoCAD, MicroStation, 2D and 3D rendering programs and other analysis programs.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Engineers in Training-EIT Certification preferred.

One Tech Engineering is searching for a Senior Electrical Engineer for a position located in St. Louis, Missouri. The Senior Electrical Engineer will lead electrical design project teams to create world class designs for new projects, alterations and redevelopments on a variety of projects including power, process, corporate, healthcare, pipeline, airports, institutional, industrial, manufacturing, government and military facilities. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s degree in Electrical Engineering or a directly related field, plus 7 years of experience in electrical systems studies in the electric utility or industrial power distribution industry.

Local candidates preferred or open to relocation. This is not a remote position.

• Executes complex assignments requiring the use of advanced electrical engineering techniques, resulting in the development of new or improved processes, equipment, and/or technological methods.
• Coordinate departmental or divisional project studies, reports, or project design assignments.
• Responsible for performing power system studies and system protection settings coordination on various projects (Up to 500-kV voltage level).
• Develop design basis documentation for protective settings and generate native relay configuration files.
• Conduct design reviews and support quality control.
• Assist the project manager in developing the scope of work and conceptual design for the projects.
• Train, guide, and mentor less experienced team members.
• Support business development and marketing initiatives.

• Bachelor’s degree in Electrical Engineering or a directly related field, plus 7 years of experience in electrical systems studies in the electric utility or industrial power distribution industry.
• Ability to obtain a Professional Engineer licensure.
• Previous experience in the development of protective relay settings in the Transmission or Distribution industry.
• Prior experience in commonly utilized system modelling software programs (ASPEN, CAPE, CYME, ETAP, SKM, etc.)
• Knowledge of protection schemes and philosophies commonly applied at Transmission and Distribution substations.
• Previous experience developing native relay setting files using SEL’s AcSELerator and GE’s Enervista software programs
• Ability to read and interpret electrical single lines, three lines, schematics, functional diagrams, etc.
• Prior experience designing calculations, including short circuit calculation, current transformer performance and ratio selection, over-current element coordination, zone-distance element selection and coordination, and relay loadability calculation.
• Ability to perform Grounding, Arc Flash, and other Power system studies is a plus.

One Tech Engineering is searching for a Senior Environmental Engineer for a position located in Houston, Dallas, Fort Worth, or Austin, Texas.. The Senior Environmental Engineer will lead and support a wide variety of environmental engineering projects, including stormwater management, hydraulic analyses, solid waste, remediation, sustainable solutions, design of environmental systems such as containment liners and water quality/treatment systems, and site development for buildings/facilities. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree and 7 years of environmental or civil engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Providing technical solutions for environmental or civil engineering projects.
• Performing calculations using industry-standard tools and software.
• Directing and reviewing work products prepared by junior engineering staff, which may include Preliminary Engineering Reports, Options Evaluations, Design Drawings, Calculations, Specifications, Work Plans, Construction Reports, and Cost Estimates.
• Design programs such as AutoCAD, Civil 3D, GIS, etc.
• Design of environmental systems and facilities.
• Lead or support of environmental or civil projects or tasks which may include earthwork/grading, stormwater, wastewater, remediation, waste management, and restoration.
• Preparing reports, studies, and cost estimates to help clients evaluate options and provide solutions.
• Project management duties such as developing and executing project scope, budget, schedule, quality, safety, and client expectations.
• Lead oversight of construction and preparation of construction quality assurance (CQA) reports.
• Internal and External Oral Presentations.
• Will train and mentor staff.
• Develop new and maintain existing client and regulatory relationships.
• Other duties, as assigned.

• Bachelor's degree in a related engineering program from an accredited university.
  7 years of environmental or civil engineering experience.
  PE license.
• Experience overseeing construction and strong understanding of construction methods and procedures preferred.
• Project management or assistant project management experience preferred.
• Available for travel as necessary (approximately 10% travel).
• Strong knowledge in standard environmental engineering techniques and procedures.
• Excellent written and verbal communication skills.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.

One Tech Engineering is searching for a Substation Project Manager for a position located in Austin, Texas. The Substation Project Manager will lead a team in the day-to-day management of project safety, quality, schedule, cost control, contracts, risk, suppliers, proposals, estimates, documentation turnover, client relations/management, field staff and other duties required to execute Design-Only, Engineer Procure Construct (EPC), Construction Management, Construction, and Program Management projects

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in engineering, construction management or a related degree from an accredited program and 7 years’ applicable experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Provide leadership and guidance of all aspects of multi-discipline engineering projects from concept to completion, including overall safety, quality, engineering, procurement, construction, environmental compliance, project controls, and public/community relations.
• Establish project teams, coordinate activities of multiple disciplines, and ensure the efficient, cost-effective utilization of staff.
• Manage all aspects of project communication.
• Lead the Project Management team in administering request for proposal (RFP) package development, bid and selection process, and scope of work documents.
• Develop and monitor project schedules, manage scope, and control project costs.
• Serve as the primary point of contact for clients regarding efforts such as client coordination, strategic planning, master scope management, budget finances, subcontracting, project staffing, environmental compliance, facility support and schedule attainment.
• Manage the review, negotiation, approval, and execution of prime contracts, subcontracts, and change orders.
• Lead internal and external project risk reviews and consult with Risk Department as required.
• Manage and approve internal and external reports, providing detailed, accurate project cost forecasts and accruals to client(s) and Global Practice leadership as required.
• Manage project controls efforts, including project cost reporting, scheduling, project work breakdown structure establishment, project set-up and closeout within the accounting system, and field progress tracking.
• Monitor progress on projects and provide input into areas of concern and direction or redirection to enhance achievement of project schedules, productivity of goals, budgets, quality, and overall profitability of the project.
• Responsible for managing contract closeout activities.
• Responsible for generating new business revenue by developing new client relationships or leveraging existing client relationships.
• Adhere to company safety programs, trainings, and policies, as well as promote and manage the safety and health performance of project team members and subcontractors.
• Participate in and attend industry-associated conferences and/or committees.
• Provide leadership, guidance, and instruction to less experienced staff.
• Responsible for QA/QC process adherence.
• Responsible for compliance with company and site safety policies.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor's Degree in engineering, construction management or related degree from an accredited program and 7 years of applicable experience.
• Prior experience on construction project sites or executing program management in the industries of aviation, commercial, energy, government, manufacturing, oil & gas, process, transmission & distribution, or water is preferred.
• Excellent written and verbal communication skills.
• Strong analytical and problem-solving skills, and attention to detail.
• Ability to thrive in a fast-paced, demanding work environment, ability to work overtime on short notice.
• Excellent computer skills and proficiency using Microsoft Office
• Ability to work collaboratively with others (owners, contractors, engineers, designers) in a multi-disciplined project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
• Strong experience with document control, scheduling, cost control and project management software.

One Tech Engineering is searching for a Transmission Engineer for a position located in St. Louis, Missouri; Akron, Ohio; or Columbus, Ohio. The Transmission Engineer will maintain a high attention to detail, possess working knowledge of Transmission Line design, demonstrate ownership of their work, drive for continual improvement, and collaborate effectively with their team and clients in order to make our clients successful.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor of Science in Engineering and 3 years of related transmission line design experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Design of high and extra-high voltage (69-500kV) transmission lines using PLS-CADD.
• Prepare construction documents including plan and profile drawings, structure loading trees, and foundation assembly drawings.
• Prepare specifications and project design criteria.
• Provide field support during construction.
• Build and maintain strong relationships with clients as well as provide technical leadership, guidance and instruction to less experienced staff members.
• Other duties as assigned.

• Bachelor of Science in Engineering from an ABET accredited program or Bachelor of Science in Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam.
• Master of Science degree in Civil Engineering may be substituted for 1 year experience.
• 3 years related transmission line design experience.
• Excellent written & verbal communication skills.
• Strong analytical and problem-solving skills.
• Experience in scheduling and budgeting.
• Ability to work in a team environment.
• Consulting or utility experience preferred.
• Experience in HVDC is a plus.

One Tech Engineering is searching for a Stakeholder Management Services Department Manager for a position located in Minneapolis, Minnesota. The Stakeholder Management Services Department Manager will be responsible for shaping and executing the practice’s vision and strategy, driving business development, overseeing project delivery, and providing overall leadership to ensure continued growth and success.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in environmental studies, geology, engineering or a related degree, and 7 years of related professional experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Identifies, develops and directs the implementation of the department's business strategies, including operational strategies and procedures, marketing and pricing strategy, and sales and customer retention strategy.
• Assists national leadership team in identifying, developing and directing the implementation of the business strategy enterprise-wide.
• Responsible for the profitable growth of the department; ensuring staff levels, staff loading, and staff assignments meet project requirements while maintaining billable goals.
• Achieves stated targets and standards for financial performance.
• Manages department budget and expenditure of funds.
• Prepares and presents workload and monthly financial reports to global practice or regional management and applicable project managers.
• Responsible for collaborating with business development managers, business line leaders, project managers, and proposal production staff on proposals to secure work for staff
• Champions safety and quality standards while promoting technical excellence and innovation.
• Responsible for maintaining the company safety program for the department.
• Adhere to and implement the company quality control program for the department.
• Provides leadership to the team; directs and coordinates work assignments and reviews performance to ensure the efficient, cost-effective utilization of staff.
• Provides expert-level technical, design guidance and support.
• Responsible for diversity initiatives.
  
• Provides leadership, guidance, and instructions to the department.
• Identifies, develops and invests in emerging leaders.
• Enables others to act, allocating appropriate decision-making authority and responsibility to others to maximize their professional growth.
• Can diffuse conflict; Encourages negotiation and workplace diplomacy.
• Generates enthusiasm, motivates and encourages others. Able to create a fun, challenging, and positive work environment with a culture of excellence.
• Makes difficult decisions and builds consensus when appropriate.
• Upholds and communicates employee-ownership culture, company policies, procedures and values.
• Recruitment, development, training and retention of staff, including setting performance goals, career development plans and conducting performance evaluations for assigned department staff.
• Responsible for interpreting policies, purposes and goals of the organization to staff.
• Implements, applies and supports company, global practice and/or regional office programs and initiatives; successfully navigating and managing change within the department.

• Bachelor's Degree in environmental studies, geology, engineering or related degree from an accredited program and 7 years of related professional experience.
• Previous leadership and/or management experience is preferable.
• Must demonstrate excellent oral and written communication skills, strong interpersonal skills, and the ability to clearly and effectively present complex information to all levels of employees, management, and clients.
• Position requires the ability to thoughtfully and positively influence, lead, and manage change.
• Must possess strong project management skills and a strategic perspective.
• Must be an expert in the use of computer software (i.e., Microsoft Word, Excel, PowerPoint).

One Tech Engineering is searching for an Electrical & Instrumentation Department Manager for a position located in Appleton, Wisconsin. The Electrical & Instrumentation Department Manager will provide leadership to the team; direct and coordinate work assignments and review performance to ensure the efficient, cost-effective utilization of staff.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in construction management, engineering, or a related field and 7 years of direct experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Responsible for profitable growth of the department; ensuring staff levels, staff loading, and staff assignments meet project requirements while maintaining billable goals.
• Implement, apply and support company, global practice and/or regional office programs and initiatives; successfully navigating and managing change within the section.
• Provide expert level technical, design guidance and support.
• Achieve stated targets and standards for financial performance.
• Manage department budget and expenditure of funds.
• Prepare and present workload and monthly financial reports to global practice or regional management and applicable project managers.
• Responsible for collaborating with department managers, business development managers, business line leads, project managers, and proposal production staff on proposals to secure work for staff
• Responsible for collaborating with business development managers, business line leads, project managers, and proposal production staff on proposals to secure work for staff.
• Responsible for the recruitment, development, training, and retention of staff.
• Responsible for conducting performance evaluations for department staff.
• Provide leadership, guidance, and instruction to the department.
• Responsible for interpreting the organization's policies, purposes, and goals to staff.
• Responsible for overall QA/QC process adherence.
• Enforce compliance with company and site safety policies.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor's degree in construction management, engineering, or related field and 7 years of direct experience required.
• Applicable experience may be substituted for the degree required.
• Proficient with Microsoft Office.
• Experience with Oracle Primavera P6 preferred.
• Excellent attention to detail.
• Excellent written and verbal communication skills.
• Excellent interpersonal skills.
• Ability to work independently, think creatively and analytically, and make quick and sound decisions.

One Tech Engineering is searching for a Siting & Routing Project Manager for a position located in Chicago, Illinois. The Siting & Routing Project Manager will support, manage, and develop business for electric transmission line routing studies, environmental surveys, National Environmental Policy Act (NEPA) analysis, and land use planning/permitting services.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a B.S. or M.S. in Environmental Science or Studies, Land Use Planning/Urban Planning, Natural and/or Cultural Resource Management, and 7 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Manage permit applications and analyze environmental data supporting the development of environmental documents and studies for various types of projects, including high-voltage transmission lines, renewables, power generation construction activities, and gas transmission.
• Prepare routing studies and evaluations pursuant to regulatory requirements for applicable state applications.
• Prepare environmental studies/evaluations, impact analysis, and NEPA documentation for projects serving a variety of markets.
• Conduct pre-application meetings with jurisdictions, interact effectively with county and local officials, prepare and submit land use permits, and prepare material for public open houses and public outreach.
• Work independently and demonstrate a high level of competence in the area of technical report writing related to NEPA compliance as well as other types of technical reports and regulatory (Federal, state, local) permitting documents.
• Work with clients, resource agencies, environmental and technical staff to prepare environmental documents and related technical studies.
• Develop, cultivate, and strengthen existing and new client relationships.
• Other duties as assigned.

• B.S. or M.S. in Environmental Science or Studies, Land Use Planning/Urban Planning, Natural and/or Cultural Resource Management or related field from an accredited program.
• Minimum 7 years related professional experience in a wide variety of areas, ranging from leading and managing technical teams, project management, business development, and the ability to effectively balance direct and indirect utilization rates.
• Minimum of 7 years of experience with routing or siting studies, environmental permitting, National Environmental Policy Act (NEPA) documents, Certificate of Public Convenience and Necessity (CPCN) documentation, or Energy Facility Siting and Licensing and associated testimony support is highly preferred.
• Ability to clearly communicate both verbal and written technical information and work effectively with various audiences (including public officials, agency representatives, property owners, businesses, clients, construction contractors, etc.).
• Experience with the resources and regulatory agencies in Ohio, Indiana, Kentucky, and/or other PJM states (preferred).
• Ability to clearly communicate both verbal and written technical information and work effectively with various audiences (including public officials, agency representatives, property owners, businesses, clients, construction contractors, etc.).
• Solid time management and follow-through skills, with the ability to simultaneously work on and manage multiple tasks/projects with tight deadlines.
• Strong analytical and problem-solving skills.
• Ability to travel up to 20%, as required.

One Tech Engineering is searching for an E&C Engineer for a position located in Minneapolis, Minnesota. The E&C Engineer will provide mechanical and electrical engineering support for natural gas and thermal power generation projects.

The candidate must be a US citizen or hold a green card. The candidate should have 8–10 years of experience, preferably with power plant design, construction, owner/operator, or EPC firms.

• Oversee power plant design, construction activities, and engineering deliverables.
• Review submittals, designs, and construction documentation to ensure compliance with project requirements and standards.
• Coordinate with internal engineering teams, contractors, and vendors to resolve technical issues.
• Support project planning, scheduling, and progress tracking to ensure timely completion of engineering tasks.
• Ensure adherence to safety, environmental, and quality standards throughout design and construction phases.
• Participate in design reviews, field inspections, and commissioning activities as needed.

• 8–10 years of experience, preferably in power plant design, construction, or with an owner/operator or EPC firm.
• Bachelor’s degree in Mechanical or Electrical Engineering (ABET-accredited).
• Experience in power generation, particularly combustion turbine plants.
• Professional Engineer (PE) license preferred, but not required.
• Familiarity with construction environments.
• Instrumentation and controls experience is a plus.
• Self-motivated and detail-oriented.

One Tech Engineering is searching for a Substation Construction Inspector for a position located in Denver, Colorado. The Substation Construction Inspector will be responsible for verifying all work performed by the prime construction contractor complies with our construction standards and the engineering prints.

Candidates must be a US citizen or hold a green card. The candidate must have at least 5 years of substation construction experience.

• Responsible for capturing any field changes to the design.
• Responsible for communicating properly to the responsible parties within the Company on a routine or daily basis.
• Responsible for insuring the constructor performs the Work to the Company's specifications and standards.
• Responsible for insuring the constructor uses the proper materials in the proper place on the Project.
• Shall take all precautions to protect Company's equipment, materials and customers and be a good representative for Company.

• 5 + years of substation construction experience.
• Previous Journeymen or Substation Electrician experience is a plus.
• Excellent oral and written communication skills.

One Tech Engineering is searching for a Senior Automation and Controls Engineer for a position located in Kansas City, Missouri. The Senior Automation and Controls Engineer will be responsible for executing automation and controls deliverables for project(s) in the front end, detailed design, construction, and start-up phases

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Controls, Electrical, Mechanical, or Chemical Engineering, or a related degree, successful completion of the Fundamentals of Engineering (FE) exam, and 7 years of experience in electrical engineering.

Local candidates preferred or open to relocation. This is not a remote position.

Senior Automation and Controls Engineer Responsibilities:

• Responsible for compliance with company and project site safety policies.
• Design responsibility for all Automation and Controls scope on the project.
• Leads a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design. 
• Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines.
• Responsible for leading and developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization. 
• Responsible for commissioning and startup of those design deliverables.
• Lead and prepare controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details.
• Lead the specification, design, and procurement activities for control panel and equipment vendors, manage vendor progression, and lead the Factory Acceptance Tests (FATs).
• Lead and prepare electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules.
• Determine process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves. Utilize knowledge of various technologies for selecting the appropriate controls application.
• Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project.
• Develop and manage verification of design, calculations, project studies and report preparation.
• Interfaces directly with offsite design office and coordinates and tracks execution of controls deliverables to that office.
• Responsible for leading and performing quality reviews of project design submittals and coordinating those reviews within the department.
• Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry.
• Interfaces directly with construction personnel in development of contracts and execution of work.
• Develops project estimates at each project phase through various software such as Proposal works, Integrated Architecture Builder (IAB), SIL Solver, Bluebeam, Excel, and Visio.
• Supports project manager in the development and tracking of automation and controls project budgets and expected progress.
• Works with clients and vendors directly in developing design. 
• Builds effective relationships with existing clients, customers and contractors and develop new business opportunities.
• Responsible for ensuring customer satisfaction goals and expectations are met. 
• Provides leadership, technical direction and development to Automation and Controls team members.
• Assists in the day to day allocation of resources to their projects.
• Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems.
• Responsible for leading the technical execution and team during onsite start-up and commissioning activities.
• Responsible for developing and submitting discipline change notices as needed to the project management team.
• Fully understands and can execute the EPC project approach.
• This position will require making trips to job sites to survey, support installations, and lead startups (travel about 30%).
• Work with our business development team to identify and develop key project and customer pursuits.
• Frequently attends and hosts client events.
• Develops business strategies for future projects.  Understands business needs and profitability factors.
• Reviews and develops engineering hour estimates and proposals for all phases of the project.
• Supports interviewing and hiring process for new team members.
• Coordinates workload with Automation and Controls Department Manager.
• Complies with all company policies and standards.
• All other duties as assigned.     

• Bachelor’s Degree in Controls, Electrical, Mechanical or Chemical Engineering or related degree from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam and 7 years electrical engineering experience.
• Expert knowledge in standard engineering techniques and procedures.
• Strong knowledge of electrical equipment design ANSI and IEEE Standards. Strong computer skills (e.g. Microsoft Office Suite).
• Excellent written and verbal communication skills.
• Experience with leading the discipline design for large projects and delegating work tasks to team members.
• Ability to lead execution of work and resolve issues in a team environment.
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Ability to perform quality reviews for detailed engineering documents and specifications.
• Must have or be able to obtain a Transportation Worker Identification Card (TWIC).
• Professional Engineer (PE) License preferred.

• Ability to perform quality reviews for detailed engineering documents and specifications.
  
• Knowledge of applicable design standards covering Automation & Controls Design/Engineering such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A.
  
• Experienced with variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS).
  
• Experience in Rockwell and Siemens PLC platform.  Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms a plus.
  
• SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus.
  
• MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS.
  
• Machine safety risk assessment and required PL design compliance to ISO13849 is a plus.
  
• Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus.
  
• Experience with PlantPAX and PackML is preferred.
  
• Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired.

One Tech Engineering is searching for an Automation and Controls Engineer for a position located in either Kansas City, Missouri; St. Louis, Missouri; or Atlanta, Georgia. The Automation and Controls Engineer will execute automation and controls engineering design activities for minor to major scale Engineering, Procurement, and Construction (EPC) projects.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Controls, Electrical, Mechanical or Chemical Engineering or a related degree, successful completion of the Fundamentals of Engineering (FE) exam, and 3+ years of electrical engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

Automation and Controls Engineer Responsibilities:

• Responsible for compliance with company and project site safety policies.
• Works with a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design. 
• Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines.
• Responsible for developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization. 
• Responsible for commissioning and startup of those design deliverables.
• Develop controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details.
• Develop electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules
• Develop the specification and design requirements for control panel and equipment vendors, track vendor progression, and lead the Factory Acceptance Tests (FATs).
• Experience with process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves.
• Utilize knowledge of various technologies for selecting the appropriate controls application.
• Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project.
• Develop verification of design, calculations, project studies, design basis and report preparation.
• Interfaces directly with offsite design office and coordinates and tracks execution of all electrical controls department work to that office.
• Responsible for performing quality reviews of project design submittals.
• Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry.
• Interfaces directly with construction personnel in development of contracts and execution of work.
• Tracks Automation and Controls design efforts against budgets and expected progress.
• Works with clients and vendors directly in developing design and builds lasting business relationships.
• Responsible for leadership and guidance of less experienced team members.
• Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems.
• Responsible for technical execution during onsite start-up and commissioning activities.
• Develops and submits discipline change notices as needed to the project management team.
• Understands the basics of the EPC project execution methodology.
• This position will require making trips to job sites to survey and support installations and startups (travel about 30%).
• Begins to understand and utilize automation project sales strategies and develops client relationships.
• Understands and assists in automation standards development for the department.
• Participates in interviews for early career team members.
• Assists in the development of engineering hour estimates and proposals for all phases of the project
• Coordinates workload with the Automation and Controls Department Manager.
• Complies with all company policies and standards.
• All other duties as assigned.     

• Bachelor’s Degree in Controls, Electrical, Mechanical or Chemical Engineering or related degree from an ABET-accredited program and successful completion of Fundamentals of Engineering (FE) exam and 3+ years of electrical engineering experience.
• EPC project and Automation 7 Controls experience preferred.
• Expert knowledge in standard engineering techniques and procedures.
• Strong knowledge of electrical equipment design, ANSI and IEEE Standards.
• Strong computer skills (e.g. Microsoft Office Suite).
• Excellent written and verbal communication skills.
• Experience with leading the discipline design for large projects and delegating work tasks to team members.
• Ability to lead the execution of work and resolve issues in a team environment.
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Ability to perform quality reviews for detailed engineering documents and specifications.
• Must have or be able to obtain a Transportation Worker Identification Card (TWIC)
• Professional Engineer (PE) License Preferred.

• Ability to perform quality reviews for detailed engineering documents and specifications.
  
• Knowledge of applicable design standards covering Automation & Controls Design/Engineering such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A.
  
• Experienced with variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS).
  
• Experience in Rockwell and Siemens PLC platform.  Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms a plus.
  
• SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus.
  
• MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS.
  
• Machine safety risk assessment and required PL design compliance to ISO13849 is a plus.
  
• Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus.
  
• Experience with PlantPAX and PackML is preferred.
  
• Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired.

• Responsible for recognizing, monitoring, and making recommendations to correct workplace safety hazards through on-site audits, consulting, ergonomic assessments, and interventions according to OSHA and other regulatory agencies; and collaborating on safety policy development and training. Conduct site safety orientations.
• Participate in Pre-Job Safety Reviews and project planning to ensure successful and safe execution of work tasks.
• Provide coaching to employees on safety practices.
• Conduct a weekly ‘all hands safety meeting’.
• Manage all hot work permitting.
• Oversee all incident investigations.
• Generate all required documentation in SiteDocs.

• At least 5-10+ years of utility safety experience.
• Previous experience working with utility contractors, and site personnel.
• Certified Utilities Safety Professional certification preferred
• Working knowledge of OSHA Compliance.
• Proficient with Microsoft office; Spreadsheets in Excel, Experience with Eco Online.

• Responsible for capturing any field changes to the design.
• Responsible for communicating properly to the responsible parties within the Company on a routine or daily basis.
• Responsible for insuring the constructor performs the Work to the Company's specifications and standards.
• Responsible for insuring the constructor uses the proper materials in the proper place on the Project.
• Shall take all precautions to protect Company's equipment, materials and customers and be a good representative for Company.

• 10 + years of substation construction experience.
• Previous Journeymen or Substation Electrician experience required
• Excellent oral and written communication skills.

• Perform primary project controls assignments to support Project Managers.
• Accountable for generating reports, assisting with control activities, responding to data requests and developing/maintaining/supporting project schedules and/or detailed cost tracking.
• Coordinates with Project Managers to obtain weekly and monthly cost and schedule updates. This includes project financials, the health of the financials, and the project as a whole by submitting monthly forecasts accruals.
• Assist the Project Managers in providing accurate project forecasting and review of expenditures.
• Attend project meetings.

• 5-7 years of experience with cost accounting within the construction, renewables, or oil and gas industry.
• Strong proficiency in Microsoft Excel.
• Experience in SAP (ECC) is strongly preferred.
• Experience with macros is preferred.
• PMP certification is a nice to have.
• Good communication skills.

One Tech Engineering is searching for a Survey Technician for a position located in Denver, Colorado. The Survey Technician will be responsible for operating AMLD-equipped vehicles to conduct night-time surveys of natural gas systems, ensuring accurate data collection and prompt reporting of any detected gas leaks.

The candidate must be a US citizen or hold a green card. The candidate should have previous experience in a delivery driving role.

• Operate fleet vehicles equipped with Advanced Mobile Leak Detection (AMLD) technology to survey natural gas systems.
• Follow specific maps to ensure complete and accurate coverage of designated survey areas.
• Conduct surveys during nighttime hours to enhance the detection of potential gas leaks.
• Turn on AMLD equipment, drive to assigned areas, and perform the survey as mapped.
• Accurately and thoroughly collect data during each survey run.
• Relay any alarms to the gas dispatch team, who will take appropriate action.
• After completing the survey, return vehicles to the service center.
• Ensure vehicles are properly plugged in and charged at the end of each shift.

• Previous experience in delivery driving jobs, such as those with Amazon, UPS, or USPS.
• Familiarity with the following routes and maps is essential.
• Experience using navigation software like Google Maps or Apple Maps is beneficial.
• Experience using tablets and specific software applications, including Picaro, AMLD leak survey software, and PQ software.
• Familiarity with driving around the Denver metro area is a plus.
• Strong communication skills.
• Must have a valid drivers license.

One Tech Engineering is searching for an Electrical Construction Supervisor for a position located near Kit Carson, Colorado. The Electrical Construction Supervisor will oversee the installation, testing, and commissioning of electrical systems, including power distribution systems, substations, high voltage systems, low voltage systems, and SCADA systems.

The candidate must be a US citizen or hold a green card. The candidate should have 5 to 7 years of electrical experience on wind turbine systems, including experience with power distribution systems, high voltage, low voltage, and substations.

• Perform inspections of electrical systems, including wiring, grounding, switchgear, transformers, and control panels.
• Verify compliance with NEC, IEC, IEEE, and project-specific electrical codes and standards.
• Inspect electrical installations for proper terminations, torque values, insulation resistance, and overall workmanship.
• Review and approve electrical work based on project specifications and quality control procedures.
• Conduct visual and functional inspections of electrical components, ensuring proper energization and operational readiness.
• Witness and document electrical testing, including megger testing, high-potential testing, and functional performance testing.
• Verify electrical grounding and bonding systems meet project requirements.
• Oversee commissioning activities, ensuring proper energization sequences and safe startup procedures.
• Identify and document non-conformances, recommending corrective actions as needed.
• Maintain detailed records of inspections, test results, and corrective actions.
• Prepare daily and weekly reports on inspection findings and status updates.
• Ensure adherence to OSHA, NFPA, and other safety regulations related to electrical systems.
• Collaborate with site engineers, contractors, and safety personnel to resolve compliance issues.
• Work closely with construction teams, project managers, and subcontractors to address electrical issues and provide guidance.
• Support and participate in safety meetings, audits, and risk assessments.
• Assist in reviewing electrical installation drawings, single-line diagrams, and cable schedules for accuracy.

• 5 to 7 years of electrical experience on wind turbine systems, including experience with power distribution systems, high voltage, low voltage, and substations.
• Electrical degree is required.
• Knowledge of OSHA, FERC regulations, and electrical/mechanical codes is required.
• Proficiency in project management tools such as Microsoft Projects and ProjectWise.
• Direct experience with Vestas platforms is preferred.
• Familiarity with Bluebeam is preferred.
• Ability to effectively manage and coordinate activities in the field.
• Strong communication skills.
• Must have a valid driver’s license.

One Tech Engineering is searching for a Geologist Assistant for a position located in Wichita, Kansas. The Geologist Assistant will assist on a variety of environmental based tasks as required by the project including federal, state, local, and commercial clients. The Geologist Assistant will also be responsible for field sampling, investigations, and report writing.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s in Geology or Environmental degree and previous internship or consulting experience.

Local candidates preferred or open to relocation. This is not a remote position.

Geologist Assistant Responsibilities:

• Assist with field related activities including logging soils, air monitoring during investigation and remediation activities, installation of groundwater monitoring wells, collection of soil and groundwater samples for laboratory analysis, and collection of soil for physical testing.
• Assist in assessing soil and groundwater data, developing soil and groundwater sampling plans, data compilation for soil, air and groundwater analytical results.
• Assist with proposal and report writing for environmental based projects.
• Assist in coordinating and scheduling subcontractors for field investigation activities and assisting with site remediation planning and implementation.
• Assist in coordinating laboratory analysis appropriate to the proper identification and evaluation of samples.
• Assist with on-site field monitoring to document compliance with various federal, state, and local permit requirements during project construction.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor’s degree in Geology or related Environmental degree required.
• Prior internship and/or related consulting experience.
• Previous internship experience, including hazardous site assessment experience, such as Phase I, Phase II and remediation preferred.
• Basic knowledge in standard geological techniques, principles and procedures.
• Basic knowledge of the Unified Soil Classification System. glacial deposits, hydrogeology and ground water sampling.
• Basic knowledge of OSHA, CERCLA and remedial design.
• Excellent written & verbal communication skills.
• Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.
• Proficient computer skills (e.g. Microsoft Office Suite).
• Basic knowledge in ArcGIS, RockWare, and Adobe Illustrator preferred.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Demonstrated leadership skills.
• Valid driver's license is required
• OSHA 40-hour HAZWOPER training is preferred.

One Tech Engineering is searching for a Designer who has previous experience with cabinetry design or commercial design experience, for a position located near Lakeville, Minnesota.

The Designer should have prior design experience and knowledge of CAD drafting and designing. This position will work in the commercial industry designing casework, cabinetry, seating, and interiors.

• Uses AutoCad and other software in the design of custom hospitality projects.
• Designs on specific hospitality industry projects as assigned.
• Makes changes to designs to improve upon design after mocked up in the shop.
• Assists in planning meetings making suggestions for interiors for the hospitality industry.
• Works in the Hospitality industry designing casework/cabinetry, seating and interiors.
• Works closely with estimators and shop floor to ensure high quality products.

• Must have a working knowledge of AutoCad.
• 1-3 years of experience required.
• 1-2 years of millwork experience preferred.
• AAS in Drafting or Design.
• Working experience with different types of materials: wood, metal plastics.
• Previous experience in a millshop, woodshop or cabinet shop preferred.