Stakeholder Management Services Department Manager

One Tech Engineering is searching for a Senior Automation & Controls Engineer for a position located in Atlanta, Georgia. The Senior Automation & Controls Engineer will lead and execute Automation and Controls Engineering design activities for minor to major scale Engineering, Procurement, and Construction (EPC) projects in food, consumer products, pharmaceutical, life science, aerospace and industrial facilities. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Controls, Electrical, Mechanical, or Chemical Engineering or a related degree from an ABET-accredited program, and successful completion of the Fundamentals of Engineering (FE) exam and 7 years of electrical engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

Senior Automation & Controls Engineer Responsibilities:

• Responsible for compliance with company and project site safety policies.
• Design responsibility for all Automation and Controls scope on the project.
• Leads a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design. 
• Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines.
• Responsible for leading and developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization. 
• Responsible for commissioning and startup of those design deliverables.
• Lead and prepare controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details.
• Lead the specification, design, and procurement activities for control panel and equipment vendors, manage vendor progression, and lead the Factory Acceptance Tests (FATs).
• Lead and prepare electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules.
• Determine process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves.
• Utilize knowledge of various technologies for selecting the appropriate controls application.
• Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project.
• Develop and manage verification of design, calculations, project studies and report preparation.
• Interfaces directly with offsite design office and coordinates and tracks execution of controls deliverables to that office.
• Responsible for leading and performing quality reviews of project design submittals and coordinating those reviews within the department.
• Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry.
• Interfaces directly with construction personnel in development of contracts and execution of work.
• Develops project estimates at each project phase through various software such as Proposal works, Integrated Architecture Builder (IAB), SIL Solver, Bluebeam, Excel, and Visio.
• Supports project manager in the development and tracking of automation and controls project budgets and expected progress.
• Works with clients and vendors directly in developing design. 
• Builds effective relationships with existing clients, customers and contractors and develop new business opportunities.
• Responsible for ensuring customer satisfaction goals and expectations are met.  
• Provides leadership, technical direction and development to Automation and Controls team members.
• Assists in the day to day allocation of resources to their projects.
• Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems.
• Responsible for leading the technical execution and team during onsite start-up and commissioning activities.
• Responsible for developing and submitting discipline change notices as needed to the project management team.
• Fully understands and can execute the EPC project approach.
• Work with our business development team to identify and develop key project and customer pursuits.
• Frequently attends and hosts client events.
• Develops business strategies for future projects.  Understands business needs and profitability factors.
• Reviews and develops engineering hour estimates and proposals for all phases of the project.
• Supports the interviewing and hiring process for new team members.
• Coordinates workload with the Automation and Controls Department Manager.
• Complies with all company policies and standards.
• All other duties as assigned.

• Bachelor’s Degree in Controls, Electrical, Mechanical, or Chemical Engineering or related degree from an ABET-accredited program and successful completion of Fundamentals of Engineering (FE) exam and 7 years of electrical engineering experience.
  EPC project and Automation 7 Controls experience preferred.
• Master’s Degree in Electrical Engineering and 6 years of electrical engineering experience.
• EPC project experience preferred.
• Expert knowledge in standard engineering techniques and procedures. Strong knowledge of electrical equipment design ANSI and IEEE Standards.
• Strong computer skills (e.g. Microsoft Office Suite).
• Excellent written and verbal communication skills.
• Experience with leading the discipline design for large projects and delegating work tasks to team members.
• Ability to lead the execution of work and resolve issues in a team environment.
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment.
• Strong attention to detail, facilitation, team building, collaboration, organization, and problem-solving skills.
• Ability to perform quality reviews for detailed engineering documents and specifications.
• Ability to travel. accredited program.
• Must have or be able to obtain a Transportation Worker Identification Card (TWIC).
• Professional Engineer (PE) License Preferred.

• Knowledge of applicable design standards covering Automation & Controls Design/Engineering, such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A.
• Experienced with a variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS).
• Experience in Rockwell and Siemens PLC platforms. 
• Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms is a plus.
• SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus.
• MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS.
• Machine safety risk assessment and required PL design compliance to ISO13849 is a plus.
• Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus.
• Experience with PlantPAX and PackML is preferred.
• Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired.

One Tech Engineering is searching for a Project Manager for a position located in Denver, Colorado. The Project Manager will lead engineers while executing highly technical, complex projects including drinking water treatment facility, pump station, and water storage tank design/construction.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in engineering, construction management or related degree, and 7+ years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

Project Manager Responsibilities:

• Provide leadership and guidance through all aspects of engineering projects from concept to completion, including overall safety, quality, engineering, procurement, construction, permitting, project controls, and public/community relations.
• Collaborate and coordinate with multi-disciplinary project teams to provide deliverables and services that meet internal QA/QC requirements and client expectations.
• Serve as the primary point of contact for clients throughout each project, building a relationship as a trusted partner as the project progresses.
• Develop and monitor project schedules, manage scope, and plan for the financial success of your projects.
• Plan, organize, and communicate project personnel needs to department management.
• Communicate project progress, cost and schedule metrics, design questions, and project challenges requiring additional support to department management.
• Provide performance feedback for project team members as appropriate.
• Work to proactively identify and position the company for upcoming projects and opportunities; utilize business development skills to lead proposals, win new projects, and increase existing client base.
• Leverage existing client relationships and focus on repeat work within each client account.
• Manage the review, negotiation, approval, and execution of prime contracts, subcontracts, and change orders.
• Be visible in the regional water and wastewater marketplace through leadership and participation in professional organizations.
• Provide guidance and industry feedback or trends to the water leadership team.

• Bachelor's degree in engineering, construction management or related degree from accredited program required.
• Minimum of 7 years of related experience (10 years preferred) in design engineering, including 3 or more years of experience managing engineering projects.
  Completion of a master's degree in a related field may be substituted for one year of experience.
• Previous consulting experience preferred.
• Professional Registration preferred.
• Demonstrated success in project management strongly preferred.
• Proven ability to develop business and establish relationships with clients strongly preferred.
• Prior experience on construction project sites or executing program management in the industries of aviation, commercial, energy, government, manufacturing, oil & gas, process, transmission & distribution, or water is preferred.
• Excellent written and verbal communication skills and strong interpersonal skills.
• Must have the ability to clearly and effectively present complex information to all levels of employees, management, and clients.
• Strong analytical and problem-solving skills, and attention to detail.
• Must be capable of devising new approaches to problems encountered.
• Ability to influence, lead and manage change thoughtfully and positively strongly desired.
• Ability to thrive in a fast-paced, demanding work environment, ability to work overtime on short notice.
• Excellent computer skills and proficiency using Microsoft Office.
• Ability to work collaboratively with others (owners, contractors, engineers, designers) in a multi-disciplined project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
• Strong experience with document control, scheduling, cost control and project management software.

One Tech Engineering is searching for an Energy & Utility Consulting Director for a position located in Brea, San Diego, Walnut Creek, or Los Angeles, California. The Energy & Utility Consulting Director will manage and provide expertise and professional development to a team of consultants and analysts in managing project quality, schedule, cost control, contracts, subcontracts, proposals, estimates, and client relations.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in engineering, business, or a related degree and 13+ years of relevant consulting experience.

Local candidates preferred or open to relocation. This is not a remote position.

Energy & Utility Consulting Director Responsibilities:

• Organize and direct consulting projects, including pursuit, negotiation, execution, cost, schedule, and quality of deliverables.
• Facilitate workshop sessions with senior-level client teams to understand requirements, identify needs, and develop actionable plans.
•  Anticipate client challenges and provide strategic, innovative, and impactful solutions.
• Communicate effectively with project personnel and department management, coordinating with internal and external subject matter experts to pursue and deliver consulting projects.
• Serve as the primary point of contact for all project-related communications and client interactions.
• Compile, distribute, and present status reports covering project progress, schedule, cost, and budget impacts to internal and external stakeholders.
• Demonstrate curiosity, continuous learning, and a willingness to take strategic risks to drive personal and professional growth.
• Establish project teams, coordinate activities across multiple disciplines, and ensure efficient, cost-effective utilization of staff.
• Provide performance feedback to personnel managers and contribute to the development of training curricula and materials for consultants and analysts.
• Foster diverse perspectives, opinions, and experiences within project teams.
• Oversee third-party vendors and subcontractors, including contracts, scope, schedule, budget, and identification of upselling or cross-selling opportunities.
• Solve complex and ambiguous problems using modern tools, technologies, and best practices to create clarity and momentum.
• Ensure timely processing of prime contract, subcontractor, and supplier invoicing in alignment with agreements.
• Provide managerial direction and work assignments to consultants and analysts.

• Bachelor's degree in engineering, business, or a related field from an accredited program.
  MBA preferred.
• Minimum of 13 years of relevant consulting experience.
• Excellent business acumen with proven success managing consulting engagements.
• Strong analytical skills with the ability to interpret large data sets quickly and efficiently.
• Ability to uncover customer needs, develop recommendations and deliver them persuasively.
• Expert facilitation, collaboration, organization, and problem-solving skills.
• Strong understanding of financial concepts.
• Excellent planning and analytical skills.
• Must demonstrate excellent oral and written communication skills; strong interpersonal skills; and the ability to clearly and effectively present complex information to all levels of employees, management, and clients.

One Tech Engineering is searching for an Electrical Engineer for a position located in Denver, Colorado. The Electrical Engineer will provide hands-on design and engineering support across electrical and instrumentation/control systems while offering the opportunity to grow into more advanced technical or project roles over time.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Electrical Engineering or a related degree and 3 years of electrical engineering experience, consulting preferred

Local candidates preferred or open to relocation. This is not a remote position.

Electrical Engineer Responsibilities:

• Develop and support complete electrical drawing packages, including one-line diagrams, electrical area classification plans, grounding plans, and lighting layouts.
• Prepare conduit and cable routing plans, conduit schedules, and cable schedules.
• Create electrical interconnection diagrams, panel layouts, and termination drawings.
• Perform basic electrical calculations, including load flow, voltage drop, short circuit, and cable/conduit sizing.
• Select and specify equipment such as switchgear, MCCs, VFDs, transformers, UPS, and distribution panels.
• Assist in developing bills of material (BOMs), equipment datasheets, and supporting procurement packages.
• Use electrical analysis software, such as ETAP and SKM, to support system studies.
  Assist in preparing and maintaining complete I&C drawing packages, including instrument location plans, instrument lists, and I/O lists.
• Prepare and review loop diagrams, ladder diagrams, and wiring diagrams.
• Develop control panel layouts, terminal diagrams, and panel bills of material (BOMs).
• Collaborate with process and mechanical teams on P&IDs.
• Assist in developing instrument datasheets, control philosophies, cause & effect matrices, and network architecture diagrams.
• Support the specification of PLCs, RTUs, instrumentation, and other control system components.
• Contribute to proposal support, including preliminary scope, budget, and schedule input.
• Support site walkdowns and data collection for retrofit or greenfield design.
• Collaborate with multi-discipline design teams to produce coordinated drawing packages.
• Interface with clients and vendors to align on scope, schedule, and technical requirements.
• Participate in construction support, including RFIs, redlines, and field verifications.
• Maintain quality standards by applying established processes and contributing to continuous improvement efforts. Coordinate with vendors for instrumentation and control panel submittals and integration.

• Bachelor’s Degree in Electrical Engineering or related degree from an ABET-accredited program and 3 years of electrical engineering experience, consulting preferred.
• Master’s Degree can substitute for 1 year of relevant experience.
• Strong knowledge of standard engineering techniques and procedures.
• Excellent written and verbal communication skills.
• Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.
• Proficient in standard engineering techniques and procedures.
• Strong computer skills (e.g. Microsoft Office Suite).
• Strong computer skills include AutoCAD, MicroStation, 2D and 3D rendering programs and other analysis programs.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Engineers in Training-EIT Certification is preferred.

One Tech Engineering is searching for a Senior Electrical Engineer for a position located in Denver, Colorado. The Senior Electrical Engineer will be responsible for leading the development of complete electrical and I&C design packages, supporting system studies and equipment specification, and mentoring less experienced team members.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Electrical Engineering or a related degree and 7 years of electrical engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

Senior Electrical Engineer Responsibilities:

• Lead the development and review of comprehensive electrical drawing packages, including one-line diagrams, electrical area classification plans, grounding layouts, lighting plans, and raceway/conduit routing plans.
• Prepare conduit and cable schedules, power plans, equipment layouts, and interconnection diagrams.
• Select, specify, and review electrical equipment such as switchgear, MCCs, VFDs, transformers, UPS, PDCs, and power panels.
• Perform and oversee electrical system studies, including load flow, short circuit, arc-flash, and coordination analyses using ETAP or SKM.
• Execute and validate electrical calculations, including cable sizing, voltage drop, conduit sizing and fill, and short circuit levels.
• Review and approve vendor submittals and bills of material, and support equipment procurement.
• Provide technical direction to junior engineers and designers regarding the electrical scope.
  Oversee the development of complete I&C design packages, including instrument location plans, instrument lists, and I/O lists.
• Prepare and review loop diagrams, ladder diagrams, and wiring diagrams.
• Develop control panel layouts, terminal diagrams, and panel bills of material (BOMs).
• Collaborate with process and mechanical teams on P&IDs.
• Review and guide the development of instrument datasheets, control philosophies, and cause & effect matrices.
• Specify and validate designs for PLCs, RTUs, SCADA, instrumentation, and other control system components.
• Provide oversight on network architecture and industrial protocol selection, including Modbus, DNP3, and Ethernet/IP.
• Mentor I&C team members on panel design, loop development, and control strategy implementation.
• Support FAT/SAT documentation and field integration planning.
• Lead development of conceptual designs, execution strategies, and technical portions of proposals.
• Support or lead scope development, cost estimating, and schedule planning.
• Conduct and lead site walks to gather field data and evaluate design constraints.
• Participate in or lead HAZOP, LOPA, and other risk or safety reviews.
• Maintain design quality through internal QA/QC reviews, checklist compliance, and redline resolution.
• Serve as technical liaison for clients and vendors during design and procurement phases.
• Mentor junior engineers, check their work, and provide feedback for technical growth.
• Contribute to the development and improvement of internal design standards, tools, and templates.
• Support or lead construction support, including RFI responses, as-built drawing reviews, and commissioning assistance.

• Bachelor's Degree in Electrical Engineering or related degree from an ABET accredited program and 7 years electrical engineering experience.
• Master's Degree can substitute as 1 year of relevant experience.
  EPC project experience preferred.
• Expert knowledge in standard engineering techniques and procedures. Strong knowledge of electrical equipment design ANSI and IEEE Standards. Strong computer skills (e.g. Microsoft Office Suite).
• Excellent written and verbal communication skills.
• Experience with leading the discipline design for large projects and delegating work tasks to team members. Ability to lead execution of work and resolve issues in a team environment.
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Ability to perform quality reviews for detailed engineering documents and specifications.
• Ability to travel.
• Professional Engineer (PE) License Preferred.

One Tech Engineering is searching for a Civil Engineer for a position located in Greenville, South Carolina. The Civil Engineer will support a wide variety of civil and environmental engineering designs for new projects, alterations, and redevelopments on a variety of projects, including high-voltage transmission line routing and siting, natural gas, renewable projects, commercial development, power generation, and water treatment facilities.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor of Science in Environmental or Civil engineering and 3 years (4 years preferred) of environmental engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

Civil Engineer Responsibilities:

• Lead or support engineering teams to deliver well-coordinated, high-quality designs for civil or environmental engineering projects.
• Coordinate with, executing and monitoring all aspects of multidisciplinary projects with varying technical complexity.
• Prepare documentation for design projects, including design criteria, technical letters, memorandums, reports, drawings, detailed design packages, and cost estimates.
• Provide strategic and/or planning services to clients.
• Direct and review work products prepared by junior engineering staff.
• Execute project scope, budget, schedule, quality, safety, and client expectations.
• Establish client relations and involvement with marketing, contractual, management, and design meetings.
• Champion QA/QC procedures.
• Execute internal personnel training.
• All other duties as assigned.

• Bachelor of Science in Environmental or Civil Engineering or related degree from an ABET-accredited program.
• Or Bachelor of Science in Environmental, Civil or related Engineering Technology from an ABET-accredited program and successful completion of Fundamentals of Engineering (FE) exam.
• A Master of Science degree in Environmental Engineering may be substituted for 1 year of experience.
• Minimum 3 years (4 years preferred) of environmental engineering experience, consulting preferred.
• Successful completion (i.e., passing) of FE or EIT preferred.
• Proficiency in AutoCAD Civil 3D
• Experience overseeing construction and an understanding of construction methods and procedures.
• Available for travel as necessary (approximately 10% travel).
• Strong knowledge of standard civil engineering techniques and procedures.
• Excellent written and verbal communication skills and demonstrated ability to communicate effectively with clients, regulators, and coworkers.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrate critical thinking skills.
• Strong computer skills (e.g., Microsoft Office Suite).

One Tech Engineering is searching for an Electrical Engineer for a position located in St. Louis, Missouri. The Electrical Engineer will be responsible for substation engineering and consulting services for clients across the US and internationally.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in Electrical Engineering or a related degree and 3 years of electrical engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

Electrical Engineer Responsibilities:

• Develop proposals and scopes of work, including conceptual designs and execution plans.
• Prepare engineering cost estimates, labor estimates, and project schedules.
• Complete physical substation design such as yard layouts, plans, sections, grounding systems, lightning protection, control building arrangements, interior/exterior raceways, auxiliary AC/DC power systems, and bills of material.
• Perform protection and control (P&C) design, including panel arrangements, one-line/single-line diagrams, three-line diagrams, AC schematics, DC elementaries, equipment wiring, and relay panel wiring.
• Prepare calculations and technical reports for engineering studies (e.g., grounding, lightning protection, AC/DC load studies).
• Develop equipment specifications for procurement and support factory acceptance testing (FAT).
• Coordinate design activities with cross-functional teams (Civil/Structural, Networks, Transmission Line, etc.).
• Provide guidance, mentorship, and technical support to junior team members.
• Collaborate and communicate regularly with clients and external stakeholders.
• Perform quality assurance reviews of designs prepared by engineers and designers.
• Provide short-term field support during construction phases.
• Support business development and marketing efforts as needed.
• Potential additional involvement in relay settings, 3D/intelligent design, or participation in industry/professional technical committees.
• Perform other duties as assigned.

• Bachelor's Degree in Electrical Engineering or related degree from an ABET-accredited program and 3 years of electrical engineering experience, consulting preferred.
• Or a Bachelor's Degree in Electrical or related Engineering Technology from an ABET-accredited program and successful completion of Fundamentals of Engineering (FE) exam and 3 years of electrical engineering experience, consulting preferred.
• Or a Master's Degree in Electrical Engineering and 2 years of electrical engineering experience, consulting preferred.
• Strong knowledge in standard engineering techniques and procedures.
• Excellent written and verbal communication skills.
• Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.
• Proficient in standard engineering techniques and procedures.
• Strong computer skills. (e.g. Microsoft Office Suite)
• Strong computer skills include AutoCAD, MicroStation, 2D and 3D rendering programs and other analysis programs.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Engineers in Training-EIT Certification preferred.

One Tech Engineering is searching for a Senior Electrical Engineer for a position located in St. Louis, Missouri. The Senior Electrical Engineer will lead electrical design project teams to create world class designs for new projects, alterations and redevelopments on a variety of projects including power, process, corporate, healthcare, pipeline, airports, institutional, industrial, manufacturing, government and military facilities. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s degree in Electrical Engineering or a directly related field, plus 7 years of experience in electrical systems studies in the electric utility or industrial power distribution industry.

Local candidates preferred or open to relocation. This is not a remote position.

• Executes complex assignments requiring the use of advanced electrical engineering techniques, resulting in the development of new or improved processes, equipment, and/or technological methods.
• Coordinate departmental or divisional project studies, reports, or project design assignments.
• Responsible for performing power system studies and system protection settings coordination on various projects (Up to 500-kV voltage level).
• Develop design basis documentation for protective settings and generate native relay configuration files.
• Conduct design reviews and support quality control.
• Assist the project manager in developing the scope of work and conceptual design for the projects.
• Train, guide, and mentor less experienced team members.
• Support business development and marketing initiatives.

• Bachelor’s degree in Electrical Engineering or a directly related field, plus 7 years of experience in electrical systems studies in the electric utility or industrial power distribution industry.
• Ability to obtain a Professional Engineer licensure.
• Previous experience in the development of protective relay settings in the Transmission or Distribution industry.
• Prior experience in commonly utilized system modelling software programs (ASPEN, CAPE, CYME, ETAP, SKM, etc.)
• Knowledge of protection schemes and philosophies commonly applied at Transmission and Distribution substations.
• Previous experience developing native relay setting files using SEL’s AcSELerator and GE’s Enervista software programs
• Ability to read and interpret electrical single lines, three lines, schematics, functional diagrams, etc.
• Prior experience designing calculations, including short circuit calculation, current transformer performance and ratio selection, over-current element coordination, zone-distance element selection and coordination, and relay loadability calculation.
• Ability to perform Grounding, Arc Flash, and other Power system studies is a plus.

One Tech Engineering is searching for a Senior Environmental Engineer for a position located in Houston, Dallas, Fort Worth, or Austin, Texas.. The Senior Environmental Engineer will lead and support a wide variety of environmental engineering projects, including stormwater management, hydraulic analyses, solid waste, remediation, sustainable solutions, design of environmental systems such as containment liners and water quality/treatment systems, and site development for buildings/facilities. 

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree and 7 years of environmental or civil engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Providing technical solutions for environmental or civil engineering projects.
• Performing calculations using industry-standard tools and software.
• Directing and reviewing work products prepared by junior engineering staff, which may include Preliminary Engineering Reports, Options Evaluations, Design Drawings, Calculations, Specifications, Work Plans, Construction Reports, and Cost Estimates.
• Design programs such as AutoCAD, Civil 3D, GIS, etc.
• Design of environmental systems and facilities.
• Lead or support of environmental or civil projects or tasks which may include earthwork/grading, stormwater, wastewater, remediation, waste management, and restoration.
• Preparing reports, studies, and cost estimates to help clients evaluate options and provide solutions.
• Project management duties such as developing and executing project scope, budget, schedule, quality, safety, and client expectations.
• Lead oversight of construction and preparation of construction quality assurance (CQA) reports.
• Internal and External Oral Presentations.
• Will train and mentor staff.
• Develop new and maintain existing client and regulatory relationships.
• Other duties, as assigned.

• Bachelor's degree in a related engineering program from an accredited university.
  7 years of environmental or civil engineering experience.
  PE license.
• Experience overseeing construction and strong understanding of construction methods and procedures preferred.
• Project management or assistant project management experience preferred.
• Available for travel as necessary (approximately 10% travel).
• Strong knowledge in standard environmental engineering techniques and procedures.
• Excellent written and verbal communication skills.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.

One Tech Engineering is searching for a Substation Project Manager for a position located in Austin, Texas. The Substation Project Manager will lead a team in the day-to-day management of project safety, quality, schedule, cost control, contracts, risk, suppliers, proposals, estimates, documentation turnover, client relations/management, field staff and other duties required to execute Design-Only, Engineer Procure Construct (EPC), Construction Management, Construction, and Program Management projects

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's Degree in engineering, construction management or a related degree from an accredited program and 7 years’ applicable experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Provide leadership and guidance of all aspects of multi-discipline engineering projects from concept to completion, including overall safety, quality, engineering, procurement, construction, environmental compliance, project controls, and public/community relations.
• Establish project teams, coordinate activities of multiple disciplines, and ensure the efficient, cost-effective utilization of staff.
• Manage all aspects of project communication.
• Lead the Project Management team in administering request for proposal (RFP) package development, bid and selection process, and scope of work documents.
• Develop and monitor project schedules, manage scope, and control project costs.
• Serve as the primary point of contact for clients regarding efforts such as client coordination, strategic planning, master scope management, budget finances, subcontracting, project staffing, environmental compliance, facility support and schedule attainment.
• Manage the review, negotiation, approval, and execution of prime contracts, subcontracts, and change orders.
• Lead internal and external project risk reviews and consult with Risk Department as required.
• Manage and approve internal and external reports, providing detailed, accurate project cost forecasts and accruals to client(s) and Global Practice leadership as required.
• Manage project controls efforts, including project cost reporting, scheduling, project work breakdown structure establishment, project set-up and closeout within the accounting system, and field progress tracking.
• Monitor progress on projects and provide input into areas of concern and direction or redirection to enhance achievement of project schedules, productivity of goals, budgets, quality, and overall profitability of the project.
• Responsible for managing contract closeout activities.
• Responsible for generating new business revenue by developing new client relationships or leveraging existing client relationships.
• Adhere to company safety programs, trainings, and policies, as well as promote and manage the safety and health performance of project team members and subcontractors.
• Participate in and attend industry-associated conferences and/or committees.
• Provide leadership, guidance, and instruction to less experienced staff.
• Responsible for QA/QC process adherence.
• Responsible for compliance with company and site safety policies.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor's Degree in engineering, construction management or related degree from an accredited program and 7 years of applicable experience.
• Prior experience on construction project sites or executing program management in the industries of aviation, commercial, energy, government, manufacturing, oil & gas, process, transmission & distribution, or water is preferred.
• Excellent written and verbal communication skills.
• Strong analytical and problem-solving skills, and attention to detail.
• Ability to thrive in a fast-paced, demanding work environment, ability to work overtime on short notice.
• Excellent computer skills and proficiency using Microsoft Office
• Ability to work collaboratively with others (owners, contractors, engineers, designers) in a multi-disciplined project team environment to resolve design or drawing issues as appropriate and to accomplish objectives.
• Strong experience with document control, scheduling, cost control and project management software.

One Tech Engineering is searching for a Transmission Engineer for a position located in St. Louis, Missouri; Akron, Ohio; or Columbus, Ohio. The Transmission Engineer will maintain a high attention to detail, possess working knowledge of Transmission Line design, demonstrate ownership of their work, drive for continual improvement, and collaborate effectively with their team and clients in order to make our clients successful.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor of Science in Engineering and 3 years of related transmission line design experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Design of high and extra-high voltage (69-500kV) transmission lines using PLS-CADD.
• Prepare construction documents including plan and profile drawings, structure loading trees, and foundation assembly drawings.
• Prepare specifications and project design criteria.
• Provide field support during construction.
• Build and maintain strong relationships with clients as well as provide technical leadership, guidance and instruction to less experienced staff members.
• Other duties as assigned.

• Bachelor of Science in Engineering from an ABET accredited program or Bachelor of Science in Engineering Technology from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam.
• Master of Science degree in Civil Engineering may be substituted for 1 year experience.
• 3 years related transmission line design experience.
• Excellent written & verbal communication skills.
• Strong analytical and problem-solving skills.
• Experience in scheduling and budgeting.
• Ability to work in a team environment.
• Consulting or utility experience preferred.
• Experience in HVDC is a plus.

One Tech Engineering is searching for a Transmission Project Manager for a position located in Austin, Texas. The Transmission Project Manager will manage, direct, and coordinate all aspects of work related to overhead transmission.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in engineering or a related field, and at least 7 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Provide overall management of projects from concept to completion, including siting, environmental, permitting, planning, estimating, engineering, right-of-way acquisition, project controls, bid phase services, procurement, constructability reviews, material management, construction management, and closeout.
• Leverage existing client relationships, create new client relationships, and focus on repeat work within each Account.
• Prepare proposals, assist in presentations, and participate in contract negotiations.
• Develop and monitor project schedules, manage scope, and control project costs.
• Own internal project financials (detailed, accurate project cost forecast and accruals), staffing, legal coordination, risk management, change management, and human resource issues.
• Serve as primary point of contact with client regarding efforts such as client coordination, strategic planning, master scope management, budget finances, subcontracting, project staffing, environmental compliance, facility support and schedule attainment.
• Manage all aspects of project communication.
• Develop and implement project policies and procedures, establish project controls systems and implement the project execution plan.
• Work closely with the Project Team to ensure deliverables and services are being provided to client’s satisfaction and that projects are following internal QA/QC guidelines.
• Report regularly on progress, cost and schedule metrics, procurement issues, safety or environmental concerns, design questions, potential impacts, and any issues requiring office support.
• Travel to client and project locations is expected.
• Support the development of the Transmission team by assisting with hiring, training, and mentoring.
• Direct and coordinate activities of several disciplines on a project of moderate scope or a combination of smaller projects.
• Travel to client and project locations will be expected.
• All other duties as assigned.

• Bachelor's degree in engineering or a related field from an accredited institution.
• Minimum of 7 years of related experience, including 3 or more years of experience managing engineering projects in the Transmission & Distribution industry. Completion of master's degree in a related field may be substituted for one year of experience.
• Professional Engineering (PE) registration preferred.
• Project Management Professional (PMP) certification preferred.
• Strong analytical and problem-solving skills. This position requires an individual capable of applying intensive and diversified knowledge of principles and practices to broad areas of assignments.
• Excellent oral and written communication skills and interpersonal skills. Must have the ability to clearly and effectively present complex information to all levels of employees, management, and clients.
• Must have experience with the production of transmission design and construction documents.
• Requires knowledge and experience working with the NESC code, as well as other industry codes and standards.
• Must be capable of devising new approaches to problems encountered.
• Demonstrated success in project management which includes proposal development, contract negotiations, project planning, design team coordination & communication, budgeting, schedule management, and client coordination.
• Proven ability to develop business and establish relationships with clients.
• Must have ability to deal effectively with a wide variety of industry, government and public contracts on project-related matters.
• Excellent written & verbal communication skills.  Strong analytical and problem-solving skills.
• Ability to travel.
• Valid driver's license required.

One Tech Engineering is searching for an Electrical & Instrumentation Department Manager for a position located in Appleton, Wisconsin. The Electrical & Instrumentation Department Manager will provide leadership to the team; direct and coordinate work assignments and review performance to ensure the efficient, cost-effective utilization of staff.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor's degree in construction management, engineering, or a related field and 7 years of direct experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Responsible for profitable growth of the department; ensuring staff levels, staff loading, and staff assignments meet project requirements while maintaining billable goals.
• Implement, apply and support company, global practice and/or regional office programs and initiatives; successfully navigating and managing change within the section.
• Provide expert level technical, design guidance and support.
• Achieve stated targets and standards for financial performance.
• Manage department budget and expenditure of funds.
• Prepare and present workload and monthly financial reports to global practice or regional management and applicable project managers.
• Responsible for collaborating with department managers, business development managers, business line leads, project managers, and proposal production staff on proposals to secure work for staff
• Responsible for collaborating with business development managers, business line leads, project managers, and proposal production staff on proposals to secure work for staff.
• Responsible for the recruitment, development, training, and retention of staff.
• Responsible for conducting performance evaluations for department staff.
• Provide leadership, guidance, and instruction to the department.
• Responsible for interpreting the organization's policies, purposes, and goals to staff.
• Responsible for overall QA/QC process adherence.
• Enforce compliance with company and site safety policies.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor's degree in construction management, engineering, or related field and 7 years of direct experience required.
• Applicable experience may be substituted for the degree required.
• Proficient with Microsoft Office.
• Experience with Oracle Primavera P6 preferred.
• Excellent attention to detail.
• Excellent written and verbal communication skills.
• Excellent interpersonal skills.
• Ability to work independently, think creatively and analytically, and make quick and sound decisions.

One Tech Engineering is searching for a Siting & Routing Project Manager for a position located in Chicago, Illinois. The Siting & Routing Project Manager will support, manage, and develop business for electric transmission line routing studies, environmental surveys, National Environmental Policy Act (NEPA) analysis, and land use planning/permitting services.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a B.S. or M.S. in Environmental Science or Studies, Land Use Planning/Urban Planning, Natural and/or Cultural Resource Management, and 7 years of related experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Manage permit applications and analyze environmental data supporting the development of environmental documents and studies for various types of projects, including high-voltage transmission lines, renewables, power generation construction activities, and gas transmission.
• Prepare routing studies and evaluations pursuant to regulatory requirements for applicable state applications.
• Prepare environmental studies/evaluations, impact analysis, and NEPA documentation for projects serving a variety of markets.
• Conduct pre-application meetings with jurisdictions, interact effectively with county and local officials, prepare and submit land use permits, and prepare material for public open houses and public outreach.
• Work independently and demonstrate a high level of competence in the area of technical report writing related to NEPA compliance as well as other types of technical reports and regulatory (Federal, state, local) permitting documents.
• Work with clients, resource agencies, environmental and technical staff to prepare environmental documents and related technical studies.
• Develop, cultivate, and strengthen existing and new client relationships.
• Other duties as assigned.

• B.S. or M.S. in Environmental Science or Studies, Land Use Planning/Urban Planning, Natural and/or Cultural Resource Management or related field from an accredited program.
• Minimum 7 years related professional experience in a wide variety of areas, ranging from leading and managing technical teams, project management, business development, and the ability to effectively balance direct and indirect utilization rates.
• Minimum of 7 years of experience with routing or siting studies, environmental permitting, National Environmental Policy Act (NEPA) documents, Certificate of Public Convenience and Necessity (CPCN) documentation, or Energy Facility Siting and Licensing and associated testimony support is highly preferred.
• Ability to clearly communicate both verbal and written technical information and work effectively with various audiences (including public officials, agency representatives, property owners, businesses, clients, construction contractors, etc.).
• Experience with the resources and regulatory agencies in Ohio, Indiana, Kentucky, and/or other PJM states (preferred).
• Ability to clearly communicate both verbal and written technical information and work effectively with various audiences (including public officials, agency representatives, property owners, businesses, clients, construction contractors, etc.).
• Solid time management and follow-through skills, with the ability to simultaneously work on and manage multiple tasks/projects with tight deadlines.
• Strong analytical and problem-solving skills.
• Ability to travel up to 20%, as required.

One Tech Engineering is searching for an E&C Engineer for a position located in either Minneapolis, Minnesota, or Eau Claire, Wisconsin. The E&C Engineer will oversee projects spanning multiple hydro facilities.

The candidate must be a US citizen or hold a green card. The candidate should have a Bachelor’s degree in Engineering and 2+ years of related engineering experience.

• Develop bid documents and detailed design specifications for assigned hydro projects.
• Coordinate projects from initiation through closeout, ensuring they stay on schedule, within budget, and aligned with project objectives.
• Conduct engineering reviews, analyses, and technical evaluations to support project design and execution.
• Collaborate with hydro plant management, contractors, and cross-functional teams throughout all project phases.
• Support field activities, including site assessments, inspections, and verification of work to ensure compliance with design and safety standards.

• Bachelor’s degree in Engineering (Mechanical, Electrical Controls, or Civil/Structural).
• Minimum of 2 years of engineering experience; hydro or industrial experience strongly preferred.
• Strong communication skills, accountability, and ability to work independently.
• Proficiency in Microsoft Office.
• Experience with SAP (work management), scheduling tools such as Primavera P6 or MS Project, and Bluebeam.
• PMP certification or project management experience is preferred.
• FE/EIT certification is preferred.
• PE license is a plus.
• Must have a valid driver’s license.

One Tech Engineering is searching for an E&C Engineer for a position located in Minneapolis, Minnesota. The E&C Engineer will serve as a project engineer supporting capital projects at gas turbine plants.

The candidate must be a US citizen or hold a green card. The candidate should have a Bachelor’s degree in Engineering and 5+ years of related experience.

• Execute mechanically based projects, coordinating with plant engineers, vendors, and contractors to ensure successful project delivery.
  
• Act as a project engineer managing approved capital projects from scope review to execution.
• Coordinate with reliability engineers and vendors to update quotes and specifications.
• Plan and execute projects during plant outages or while online, ensuring resource availability.
• Liaise with contractors and internal teams to ensure alignment on installation and commissioning.
• Maintain safety compliance and coordinate site access and orientation.
• Travel between plant locations as needed, with most work centered in the metro area.

• Bachelor’s degree in Mechanical or Electrical Engineering, and 5+ years of related experience.
• Experience in utilities, manufacturing, or heavy industry; gas turbine experience is a plus.
• Strong organizational skills related to managing budgets, schedules, change orders, and team members.
• Proficiency in Microsoft Office Suite and SAP; familiarity with AutoCAD or Bluebeam is a plus.
• Ability to work collaboratively with plant operations, site management, and craft labor teams.
• Excellent communication and relationship management skills.

One Tech Engineering is searching for an E&C Engineer for a position located in Denver, Colorado. The E&C Engineer will support the company’s energy supply projects group to help manage capital projects at the power plants across the region.

The candidate must be a US citizen or hold a green card. The candidate should have a Bachelor’s degree in Engineering and 2+ years of experience working in a manufacturing/plant environment.

E&C Engineer Responsibilities:  

• Manage all emergent capital projects at the plant and support larger base and major capital projects.
• Partner with reliability engineering to develop project scopes and justifications, submit requests through the company’s emergent capital process, and manage all approved projects.
• Oversee approximately 20 small projects simultaneously while also assisting with larger base capital initiatives.
• Work closely with operations and reliability engineering to understand plant systems, how they operate, and help plan future work to maintain plant reliability.
• Attend daily POD meetings (internal morning meetings focused on daily critical tasks) and collaborate with operations and reliability personnel throughout the day.
• Oversee contractors executing project work in the field.
• Complete administrative project tasks, including developing scopes of work, writing technical specifications, obtaining equipment quotes, managing bids when necessary, and coordinating material deliveries and installation with the plant.

• Bachelor’s degree in Engineering and 2+ years of experience working in a manufacturing/plant environment, like a power plant.
• Experience with cradle to crave Project management experience.
• Previous experience managing contractors.
• Previous experience with project management and project plan development, charters, managing budgets, good with managing money, etc.
• Ability to multitask and juggle several tasks without sacrificing quality, takes initiative, teamwork, iand nterpersonal/communication skills.
• Proficient with Microsoft Office suite (Outlook, Teams, Excel, SharePoint).
• Completion of the FE (fundamentals in engineering) exam is preferred.

One Tech Engineering is searching for an E&C Engineer for a position located in Denver, Colorado, with site visits to Georgetown, Glenwood Springs, and Durango, Colorado. The E&C Engineer will be supporting the development and execution of hydroelectric projects across Colorado.

The candidate must be a US citizen or hold a green card. The candidate should have 3+ years of civil engineering experience with 1-2 years specifically in the renewable generation project space (construction or engineering design).

• Provide civil engineering expertise throughout the project lifecycle, focusing on evaluating design drawings and managing submittals and Requests for Information (RFIs) across multiple active sites.
• Support multiple concurrent projects, ensuring consistency, accuracy, and quality in all technical deliverables.
• Collaborate closely with the Project Manager, internal teams, and external consultants to support design coordination, construction planning, and field execution.
• Assist the Project Manager with upfront project scoping, estimating, and planning activities.
• Coordinate with design engineering consultants and internal teams (operations, environmental, etc.) to define project requirements and deliverables.
• Manage submittals and RFIs, ensuring technical documentation aligns with project specifications.
• Review design drawings, studies, and analyses, communicating variances from company standards for internal approval.
• Provide field support during construction phases, addressing civil engineering questions and clarifying design details.
• Troubleshoot on-site issues and ensure construction activities comply with design intent and company standards.
• Coordinate with contractors and lead project meetings to ensure effective communication and progress tracking.

• 3+ years of civil engineering experience with 1-2 years specifically in the renewable generation project space (construction or engineering design).
• Bachelor’s degree from an ABET accredited school or strong/commensurate experience.
• Prior experience working with utilities or design firms on renewable technologies.
• Knowledge of/familiarity with NCRs, RFIs, and the ability to understand and manage the scope of a contract.
• Strong written and verbal communication skills along with strong analytical skills.
• Familiarity with ProjectWise, Microsoft Office, Bluebeam, and Procore would be nice to have.  
• SAP experience is a plus.
• Professional Engineering license, or Engineering in Training/certification to become a professional engineer is strongly preferred.

One Tech Engineering is searching for a Project Coordinator for a position located in Denver, Colorado, or St.Paul, Minnesota. The Project Coordinator will manage work and purchase orders and resolve related errors.

The candidate must be a US citizen or hold a green card. The candidate should have at least 2 years of related experience in a customer facing role.

• Research and resolve errors related to work orders and purchase orders.
• Perform resolution of purchase orders and work orders as needed.
• Use Excel, Microsoft 365 Office, and SAP to manage work orders and purchase orders.
• Handle high-volume billing tasks on a daily basis.
• Maintain consistent communication and follow-up with Project Managers, Coordinators, and job runners.
• Attend weekly vendor meetings.

• 2+ years of related experience, previous customer facing role preferred.
• Experience with work orders and purchase orders through SAP.
• Proficiency in Microsoft Office 365, with a strong focus on Excel
  Familiarity with Power BI within Microsoft is a nice to have.
  Strong communication and organizational skills.

One Tech Engineering is searching for an E&C Engineer for a position located in Minneapolis, Minnesota. The E&C Engineer will provide civil engineering support for renewable energy projects, including wind, solar, and battery installations.

The candidate must be a US citizen or hold a green card. The candidate should have3–5 years of experience working with DOT, government agencies, or civil contractors.

• Support the planning, design, and construction phases of projects, ensuring alignment with engineering and construction standards.
• Review and evaluate engineering deliverables and construction documentation.
• Address and resolve RFIs and construction-related issues in collaboration with project teams.
• Assist the management team with contract negotiations and issue resolution.
• Work closely with project engineers, senior engineers, project managers, and construction managers to ensure successful project execution.

• 3–5 years of experience working with DOT, government agencies, or civil contractors.
• Bachelor’s degree in Civil Engineering from an ABET-accredited institution is strongly preferred.
• EIT certification is preferred but not required.
• Strong written and verbal communication skills, and have excellent attention to detail, especially in reviewing submittals and documentation.
• Familiarity with Google Earth or similar geospatial tools is preferred.
• Experience with grading, drainage, and renewable energy projects (wind, solar, or battery) is a plus.

One Tech Engineering is searching for an E&C Engineer for a position located in Minneapolis, Minnesota. The E&C Engineer will provide mechanical and electrical engineering support for natural gas and thermal power generation projects.

The candidate must be a US citizen or hold a green card. The candidate should have 8–10 years of experience, preferably with power plant design, construction, owner/operator, or EPC firms.

• Oversee power plant design, construction activities, and engineering deliverables.
• Review submittals, designs, and construction documentation to ensure compliance with project requirements and standards.
• Coordinate with internal engineering teams, contractors, and vendors to resolve technical issues.
• Support project planning, scheduling, and progress tracking to ensure timely completion of engineering tasks.
• Ensure adherence to safety, environmental, and quality standards throughout design and construction phases.
• Participate in design reviews, field inspections, and commissioning activities as needed.

• 8–10 years of experience, preferably in power plant design, construction, or with an owner/operator or EPC firm.
• Bachelor’s degree in Mechanical or Electrical Engineering (ABET-accredited).
• Experience in power generation, particularly combustion turbine plants.
• Professional Engineer (PE) license preferred, but not required.
• Familiarity with construction environments.
• Instrumentation and controls experience is a plus.
• Self-motivated and detail-oriented.

One Tech Engineering is searching for a Designer for a position located in Denver, Colorado. The Project Manager will manage capital improvement projects for the company’s gas system, specifically non-pipeline assets such as regulator stations, odorization facilities, compressor stations, and other fixed assets.

The candidate must be a US citizen or hold a green card. The candidate should have 5–7 years of experience as a Project Manager (PM), preferably within the gas utility industry.

• Oversee the full project lifecycle from concept to close-out, including funding requests, engineering coordination, stakeholder engagement, procurement (quotes, POs, vendors), execution, and project finalization.
• Manage project deliverables and milestones based on each project phase.
• Coordinate regularly with internal teams (engineering, operations, SMEs, procurement) and external stakeholders (vendors, cities, municipalities).
• Ensure adherence to the project lifecycle, maintaining timelines, budgets, and clear stakeholder communication.
• Support the Process Controls team in managing non-pipeline gas assets.
• Collaborate closely with engineers, operations personnel, procurement teams, third-party engineering firms, city and municipal stakeholders, and vendors.
• Lead projects involving replacements, relocations, and system upgrades within the gas utility infrastructure.

• 5–7 years of experience as a Project Manager, preferably within the gas utility industry.
• A combination of 2–3 years of gas industry experience plus a strong project management background is also acceptable.
• Bachelor’s degree in Engineering, preferably Mechanical, Chemical, or Petroleum.
• Prior experience with gas utilities, pipeline facilities, or refinery projects.
• PMP certification is nice to have.
• Strong communication and stakeholder management skills.
• Proven ability in project lifecycle management and organizational planning.
• Demonstrated accountability and ability to drive project timelines.
• Proven budget management and cost control experience.
• Skilled in cross-functional coordination and collaboration across multiple teams.

One Tech Engineering is searching for a Designer for a position located in Maple Grove, Minnesota. The Designer will be responsible for managing projects from concept through completion, including client communication, site evaluation, design development, approval coordination, and ensuring successful project execution.

The candidate must be a US citizen or hold a green card. The candidate should have previous customer service or customer-facing experience.

• Engage with clients to gather detailed information, confirm specifications, and build strong working relationships.
• Perform site assessments as needed to evaluate conditions, take measurements, and inform design decisions.
• Develop designs and documentation that reflect client needs, site realities, and applicable standards.
• Present designs for internal and client review, make revisions as required, and secure approvals.
• Coordinate with internal teams and contractors during construction to support quality control and ensure the final build aligns with the design.

• Previous customer service or customer-facing experience.
• Experience with GIS, project management concepts, or power utility systems is preferred.
• Proficient in Microsoft Suite.
• Strong technology skills.
• Must have a Valid driver's License.

One Tech Engineering is searching for a Construction Observer for a position located in Tulsa, Oklahoma. The Construction Observer is responsible for on-site administrative and construction observation services on behalf of the client for rail and civil projects. This includes coordinating, reviewing, and verifying that products, installations, schedules, applications, and work provided by the contractor all verify to the engineering drawings and specifications.  

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have 8 years of construction management experience or craft supervision experience on engineering or construction projects.

Local candidates preferred or open to relocation. This is not a remote position.

• Monitor subcontractor activities to verify that installations are in conformance with the contractual and design documents.  This includes observations of the materials, work in progress, and finished installations.
• Communicate and interface with Engineering Manager and discipline engineers to resolve field engineering items and contractor non-conformance.
• Develop and distribute project status reports through detailed daily project logs and frequent, regular project site photographs documenting work as it progresses.
• Facilitate regular communication with engineering, the owner, client, contractor and other stakeholders to improve project communication and performance.
• Lead and oversee field meetings, including safety, coordination and project schedule meetings.
• Interface with client representatives, municipal authorities and other contractors as necessary to execute projects.
• Collaborate with the project management team to implement project execution plans, project procedures, working documents, site procedures and project standards.
• Responsible for ensuring contractual compliance with contracted and subcontracted parties on designated construction-related activities.
• Review delivered materials and verify conformance with approved drawings and submittals.  
  Review and verify subcontractor progress payments and supplier invoices.
• Provide technical assistance, interpretation of drawings, and recommendation of construction methods and equipment installation.
• Develop and foster effective client and subcontractor relationships.
• Responsible for QA/QC process adherence.
• Adhere to and ensure compliance with company’s safety programs, training, and policies, as well as collaborate with the project teams to manage the Safety & Health performance of the project/program team members and others as required.
• Performs other duties as assigned.
• Complies with all policies and standards.

• High School Diploma/GED and 8 years of construction management experience or craft supervision experience on engineering or construction projects.
  
• Experience as a lead construction project inspector preferred.
  
• Knowledge of rail and civil engineering plans, drawings, specifications, construction permitting, construction standards, means, and methods.
  
• Experience with surveying and materials testing preferred.
  
• Strong analytical and problem-solving skills, and attention to detail.
  
• Must demonstrate excellent oral and written communication skills, strong interpersonal skills, and the ability to clearly and effectively present complex information to all levels of employees, management, and clients.
  
• Broad exposure and experience communicating with engineers, owners, clients, and contractors, including coordination and communication with regulatory and jurisdictional agencies, preferred.
  
• Proficiency in computer software (i.e. Microsoft Word, Excel, PowerPoint).
  
• Experience in document control software and project management systems is preferred.
  
• Must be able to meet company's driving requirements.
  
• Must be willing to work the majority of time in the field. 
  
• A valid driver's license is required.

One Tech Engineering is searching for a Project Coordinator for a position located in either Denver, Colorado, or Minneapolis, Minnesota. The Project Coordinator will assist in managing and advancing the DER interconnection application process for distributed energy resources (DER).

The candidate must be a US citizen or hold a green card. The candidate should have a Bachelor’s or Associate's degree, or at least two years of professional experience

• Pull and analyze daily reports to track and manage applications and assigned tasks.
• Ensure timely processing and progression of applications, ensuring all requirements are met and deadlines are adhered to.
• Communicate with customers to address any questions or concerns related to their solar applications.
• Answer customer inquiries through the application portal and provide support regarding the status and details of their solar applications.
• Collaborate with internal teams to ensure smooth coordination and facilitate the timely completion of the application process.

• Bachelor’s or Associate's degree, or at least two years of professional experience
• Previous customer service experience.
• Salesforce experience is a plus.
• Attention to detail is a must.
• Excellent communication skills, both written and verbal.

One Tech Engineering is searching for a Benefits Specialist for a position located in Minneapolis, Minnesota. The Benefits Specialist will support the benefits team on various projects, including data analysis, reporting, and benefit census validation.

The candidate must be a US citizen or hold a green card. The candidate should have 5–7 years of experience in benefits, preferably as a Benefits Specialist, Benefits Analyst, or Benefits Administrator.

• Focus on analytics, process improvement, and ensuring accuracy in benefit records.
• Verify and validate census data to support actuaries and external vendors.
• Cross-train on key processes such as POPR funding.
• Collaborate with external vendors and actuarial consultants for data validation and reporting.
• Perform data pulls and validation using Workday and Excel.
• Attend three weekly team meetings and assist with documenting project notes.
• Support ad hoc requests and provide analytical support for ongoing benefits projects.
• Work closely with team members to prepare reports, manage vendor communications, and ensure timely project deliverables.

• 5–7 years of experience in benefits, preferably as a Benefits Specialist, Benefits Analyst, or Benefits Administrator.
• Experience supporting large employer health plans (5,000+ employees).
• Familiarity with Workday is preferred.
• Advanced Excel (pivot tables, concatenate, data organization).
• Data analysis and reporting experience
• Strong problem-solving and analytical thinking
• Strong communication skills.
• Attention to detail and accuracy.
• Collaborative mindset and independence in completing assigned tasks.
• Organizational skills for managing data requests and project priorities.
• Union experience or exposure to collective bargaining agreements is nice to have.
• CEBS certification is nice to have.

One Tech Engineering is searching for a Substation Construction Inspector for a position located in Denver, Colorado. The Substation Construction Inspector will be responsible for verifying all work performed by the prime construction contractor complies with our construction standards and the engineering prints.

Candidates must be a US citizen or hold a green card. The candidate must have at least 5 years of substation construction experience.

• Responsible for capturing any field changes to the design.
• Responsible for communicating properly to the responsible parties within the Company on a routine or daily basis.
• Responsible for insuring the constructor performs the Work to the Company's specifications and standards.
• Responsible for insuring the constructor uses the proper materials in the proper place on the Project.
• Shall take all precautions to protect Company's equipment, materials and customers and be a good representative for Company.

• 5 + years of substation construction experience.
• Previous Journeymen or Substation Electrician experience is a plus.
• Excellent oral and written communication skills.

One Tech Engineering is searching for a Materials Manager for a position located in Corpus Christi, Texas. The Materials Manager is responsible for managing the receiving, inspection, storage and transfer of all company  and client procured materials and equipment to subcontractors at the various project sites.  

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a High School Diploma/GED and 11 years of direct materials management experience in the engineering and construction industry required.

Local candidates preferred or open to relocation. This is not a remote position.

• Analyze and present the material status reports to validate and verify all shipments are delivered on schedule.  
• Advise the Procurement team of any developments that may impact the project cost, schedule and client relationship.
• Coordinate delivery schedules and timing between the job site and procurement.
• Direct and oversee the receiving process for all incoming shipments of materials and equipment.
• Implement, oversee and administer all project materials reporting processes and procedures including
• Material Receiving Reports (MRR) and Over, Short and Damaged reports (OS&D) and distribute to the designated project and/or client personnel.
• Perform inspections of all materials delivered to the project site.
• Develop site logistics plans.
• Develop, maintain, and oversee all project site warehouse facilities.
• Develop, maintain, and oversee all project laydown yards.
• Oversee the storage and maintenance of all materials and equipment as required by the specific project contract.
• Assist the Quality Assurance/Quality Control manager with preventive maintenance and associated recordkeeping of all material and equipment in storage.
• Oversee the transfer of custody of materials and equipment to the designated subcontractors at the project site.
• Performs other duties as assigned.
• Complies with all policies and standards.

• High School Diploma/GED and 11 years of direct materials management experience in the engineering and construction industry required.
• Excellent computer skills and proficiency in Microsoft Office. 
• Experience with Primavera scheduling reports and other material/submittal tracker reports.
• Exceptional written and verbal communication skills and strong organizational skills with excellent attention to detail.
• Must be team-oriented with good management skills and the ability to be self-motivated with little or no supervision.

One Tech Engineering is searching for a Project Manager for a position located in Appleton, Wisconsin. The Project Manager will plan, direct, and coordinate activities of designated project(s) to ensure that goals or objectives of project(s) are accomplished within prescribed time frame and funding parameters by performing the following duties personally or through subordinate supervisors.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s degree (B.A.), or ten (10) years of related experience, or an equivalent combination of education and experience.

Local candidates preferred or open to relocation. This is not a remote position.

• Process incoming bid requests from client with assistance from the business development and estimating departments.
• Review and prepare estimates based off labor calculations, material pricing and subcontracts.
• Review estimating department proposals prior to client submission.
• Reviews project proposals or plans to determine time frame, funding limitations, and procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project.
• Collaborates with project controls to establish budgets.
• Assembles kick-off meeting to inform all departments involved in the schedule.
• Establishes work plan and staffing for each phase of the project and establishes a schedule.
• Prepares information for vendor subcontracts and coordinates material purchase orders with material procurement. This would involve creating purchase requisitions as well.
• Confers with project staff to outline work plan and to assign duties, responsibilities, and scope of authority with the project team.
• Directs and coordinates activities of project personnel to ensure project progresses on schedule and within the prescribed budget.
• Reviews status reports and modifies schedules or plans as required.
• Prepares project reports for management, the client, or others.
• Confers with project personnel to provide technical advice and to resolve problems.
• Coordinates project activities with the activities of government regulatory or other governmental agencies.
• Coordinates timely shipments to meet customers’ schedules.
• Responsible for timely change management and contract changes.
• Resolves any outstanding issues to ensure prompt payments.
• Prepares and completes job close-out and evaluates best practices for continuous improvement.

• Bachelor’s degree (B.A.) from a four-year college or university, or ten (10) years related experience or equivalent combination of education and experience.
• Experience with piping or structural design platforms, including SpoolFab or Tekla/Tekla EPM, is desired.
• Experience with ASME and/or AISC fabrication quality programs.
• Knowledge of MS Office, and be proficient in Excel and Word.
• Must have excellent written and verbal communication skills.
• Organized, detail-oriented, and very thorough.

One Tech Engineering is searching for a Senior Automation and Controls Engineer for a position located in Kansas City, Missouri. The Senior Automation and Controls Engineer will be responsible for executing automation and controls deliverables for project(s) in the front end, detailed design, construction, and start-up phases

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Controls, Electrical, Mechanical, or Chemical Engineering, or a related degree, successful completion of the Fundamentals of Engineering (FE) exam, and 7 years of experience in electrical engineering.

Local candidates preferred or open to relocation. This is not a remote position.

Senior Automation and Controls Engineer Responsibilities:

• Responsible for compliance with company and project site safety policies.
• Design responsibility for all Automation and Controls scope on the project.
• Leads a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design. 
• Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines.
• Responsible for leading and developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization. 
• Responsible for commissioning and startup of those design deliverables.
• Lead and prepare controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details.
• Lead the specification, design, and procurement activities for control panel and equipment vendors, manage vendor progression, and lead the Factory Acceptance Tests (FATs).
• Lead and prepare electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules.
• Determine process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves. Utilize knowledge of various technologies for selecting the appropriate controls application.
• Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project.
• Develop and manage verification of design, calculations, project studies and report preparation.
• Interfaces directly with offsite design office and coordinates and tracks execution of controls deliverables to that office.
• Responsible for leading and performing quality reviews of project design submittals and coordinating those reviews within the department.
• Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry.
• Interfaces directly with construction personnel in development of contracts and execution of work.
• Develops project estimates at each project phase through various software such as Proposal works, Integrated Architecture Builder (IAB), SIL Solver, Bluebeam, Excel, and Visio.
• Supports project manager in the development and tracking of automation and controls project budgets and expected progress.
• Works with clients and vendors directly in developing design. 
• Builds effective relationships with existing clients, customers and contractors and develop new business opportunities.
• Responsible for ensuring customer satisfaction goals and expectations are met. 
• Provides leadership, technical direction and development to Automation and Controls team members.
• Assists in the day to day allocation of resources to their projects.
• Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems.
• Responsible for leading the technical execution and team during onsite start-up and commissioning activities.
• Responsible for developing and submitting discipline change notices as needed to the project management team.
• Fully understands and can execute the EPC project approach.
• This position will require making trips to job sites to survey, support installations, and lead startups (travel about 30%).
• Work with our business development team to identify and develop key project and customer pursuits.
• Frequently attends and hosts client events.
• Develops business strategies for future projects.  Understands business needs and profitability factors.
• Reviews and develops engineering hour estimates and proposals for all phases of the project.
• Supports interviewing and hiring process for new team members.
• Coordinates workload with Automation and Controls Department Manager.
• Complies with all company policies and standards.
• All other duties as assigned.     

• Bachelor’s Degree in Controls, Electrical, Mechanical or Chemical Engineering or related degree from an ABET accredited program and successful completion of Fundamentals of Engineering (FE) exam and 7 years electrical engineering experience.
• Expert knowledge in standard engineering techniques and procedures.
• Strong knowledge of electrical equipment design ANSI and IEEE Standards. Strong computer skills (e.g. Microsoft Office Suite).
• Excellent written and verbal communication skills.
• Experience with leading the discipline design for large projects and delegating work tasks to team members.
• Ability to lead execution of work and resolve issues in a team environment.
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Ability to perform quality reviews for detailed engineering documents and specifications.
• Must have or be able to obtain a Transportation Worker Identification Card (TWIC).
• Professional Engineer (PE) License preferred.

• Ability to perform quality reviews for detailed engineering documents and specifications.
  
• Knowledge of applicable design standards covering Automation & Controls Design/Engineering such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A.
  
• Experienced with variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS).
  
• Experience in Rockwell and Siemens PLC platform.  Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms a plus.
  
• SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus.
  
• MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS.
  
• Machine safety risk assessment and required PL design compliance to ISO13849 is a plus.
  
• Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus.
  
• Experience with PlantPAX and PackML is preferred.
  
• Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired.

One Tech Engineering is searching for an Automation and Controls Engineer for a position located in either Kansas City, Missouri; St. Louis, Missouri; or Atlanta, Georgia. The Automation and Controls Engineer will execute automation and controls engineering design activities for minor to major scale Engineering, Procurement, and Construction (EPC) projects.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Controls, Electrical, Mechanical or Chemical Engineering or a related degree, successful completion of the Fundamentals of Engineering (FE) exam, and 3+ years of electrical engineering experience.

Local candidates preferred or open to relocation. This is not a remote position.

Automation and Controls Engineer Responsibilities:

• Responsible for compliance with company and project site safety policies.
• Works with a team of Automation and Controls Engineers, Specialists, and Designers in the execution of design. 
• Interfaces with a multi-faceted project team internally consisting of project manager, electrical, controls, estimating, procurement, construction, and other engineering disciplines.
• Responsible for developing software design deliverables including PLC and HMI programming design deliverables as well as Batch, MES, servers and virtualization. 
• Responsible for commissioning and startup of those design deliverables.
• Develop controls design deliverables, including instrument/device list, I/O list, controls narratives, control panel and controls hardware design, device location plan drawings and installation details.
• Develop electrical design deliverables including 480VAC and below equipment and motor power design, installation plan drawings, and conductor schedules
• Develop the specification and design requirements for control panel and equipment vendors, track vendor progression, and lead the Factory Acceptance Tests (FATs).
• Experience with process instrument measurements protocols, such as temperature, pressure, flow, level, analyzers, and control valves.
• Utilize knowledge of various technologies for selecting the appropriate controls application.
• Experienced in reviewing P&IDs and working with process engineers to define and show proper controls scope of the project.
• Develop verification of design, calculations, project studies, design basis and report preparation.
• Interfaces directly with offsite design office and coordinates and tracks execution of all electrical controls department work to that office.
• Responsible for performing quality reviews of project design submittals.
• Responsible for applying knowledge of commonly used automation and controls engineering/design concepts, principles, practices, codes, and procedures within the engineering services industry.
• Interfaces directly with construction personnel in development of contracts and execution of work.
• Tracks Automation and Controls design efforts against budgets and expected progress.
• Works with clients and vendors directly in developing design and builds lasting business relationships.
• Responsible for leadership and guidance of less experienced team members.
• Coordinate with field personnel to resolve design related installation issues, calculations, field inspections and testing of controls systems.
• Responsible for technical execution during onsite start-up and commissioning activities.
• Develops and submits discipline change notices as needed to the project management team.
• Understands the basics of the EPC project execution methodology.
• This position will require making trips to job sites to survey and support installations and startups (travel about 30%).
• Begins to understand and utilize automation project sales strategies and develops client relationships.
• Understands and assists in automation standards development for the department.
• Participates in interviews for early career team members.
• Assists in the development of engineering hour estimates and proposals for all phases of the project
• Coordinates workload with the Automation and Controls Department Manager.
• Complies with all company policies and standards.
• All other duties as assigned.     

• Bachelor’s Degree in Controls, Electrical, Mechanical or Chemical Engineering or related degree from an ABET-accredited program and successful completion of Fundamentals of Engineering (FE) exam and 3+ years of electrical engineering experience.
• EPC project and Automation 7 Controls experience preferred.
• Expert knowledge in standard engineering techniques and procedures.
• Strong knowledge of electrical equipment design, ANSI and IEEE Standards.
• Strong computer skills (e.g. Microsoft Office Suite).
• Excellent written and verbal communication skills.
• Experience with leading the discipline design for large projects and delegating work tasks to team members.
• Ability to lead the execution of work and resolve issues in a team environment.
• Demonstrated critical thinking skills, ability to work methodically and analytically in a quantitative problem-solving environment.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Ability to perform quality reviews for detailed engineering documents and specifications.
• Must have or be able to obtain a Transportation Worker Identification Card (TWIC)
• Professional Engineer (PE) License Preferred.

• Ability to perform quality reviews for detailed engineering documents and specifications.
  
• Knowledge of applicable design standards covering Automation & Controls Design/Engineering such as NFPA, ISA, IEC, IEEE, ISA/IEC 61511, ISO13849, UL508A.
  
• Experienced with variety of control and safety systems (PLC, SCADA, SIS, BMS, DCS).
  
• Experience in Rockwell and Siemens PLC platform.  Experience in GE, Modicon, Opto22, Mitsubishi, and Triconex PLC platforms a plus.
  
• SCADA experience with Factory Talk and Wonderware local and distributed systems, Ignition Software is a plus.
  
• MES Design and Implementation Experience a Plus, PTC ThingWorx, Ignition/Sepasoft, Parsec TrakSYS.
  
• Machine safety risk assessment and required PL design compliance to ISO13849 is a plus.
  
• Process safety SIF/SIS design compliance to ISA/IEC 61511 is a plus.
  
• Experience with PlantPAX and PackML is preferred.
  
• Familiarity with tools like SISTEMA, CCW, IAB, BatchSIM, and PlantSIM is desired.

One Tech Engineering is searching for a Purchaser for a position located in Wallingford, Connecticut, or Newton, Massachusetts. The Purchaser will perform purchasing responsibilities throughout the project life cycle which includes ordering materials, supplies, equipment, and the follow through with venders on shipment and delivery.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s Degree in Supply Chain Management, Law or Construction-related field and 3 years’ direct purchasing experience.

Local candidates preferred or open to relocation. This is not a remote position.

Purchaser Responsibilities:

• Prepare procurement documents and agreements.
• Perform commercial bid evaluations of supplier proposals and coordinate technical evaluations and recommendations to procurement manager and senior purchaser.
• Prepare purchase order documents and enter purchase order information into online purchasing application.
• Prepare expediting supplier submittals to support detailed design and delivery of equipment and material to support construction.
• Prepare front-end documents including prime agreement flow downs.
• Source and qualify potential suppliers to provide required goods and services.
• Communicate and address procurement issues with appropriate parties, including management.
• Compile procurement and expediting status reports.
• Prepare equipment, materials, and subcontracts forms and reports.
• Compile "Request for Proposal" (RFP) documents including documents/drawings/specifications provided by the internal client.
• Prepare procurement packages to engineering specifications.
• Receive, log, distribute, tabulate, and analyze proposals. Make recommendations for purchasing needs for contracts.
• Responsible for updating Project Procurement Status and Material.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor Degree in Supply Chain Management, Law or Construction related field and 3 years direct purchasing experience.
• Applicable experience may be substituted for the degree requirement.  
• Project purchasing experience preferred.
• Oracle Financial R12 software experience preferred.
• Excellent written and verbal communication skills.
• Excellent interpersonal skills.
• Proficient computer skills (e.g. Microsoft Office Suite)
• Strong attention to detail, facilitation, team building, collaboration, organization and problem solving skills.
• Experience in devising new approaches to purchasing problems encountered.
• CPM Certification or CPSM Certification is preferred.

One Tech Engineering is searching for a Construction Manager for a position located in Lubbock, Texas. The Construction Manager will provide on-site management and direct oversight of the safe, cost effective, day to day construction activities for the construction and installation of additional capital assets.

The candidate must be a US citizen or hold a green card. The candidate should have previous experience with the installation and commissioning activities relating to Combustion Turbines & Generators, Black Start Power Plant builds, and supporting systems

• Monitor day to day activities and ensure short- and long-term goals are being met.
• Daily record keeping of activities along with weekly Project reporting.
• Tracking and reporting of delays, extra work or potential extra work performed by contractors.
• Coordination of construction activities with plant operations to ensure plant reliability and operations remain unaffected during all construction phases.
• Monitor and champion construction safety.
•  Provide visible safety leadership through your actions and performance.
• Participate in worksite audits, safety observations, safety investigations and reporting of incidents and near misses, and accidents/injuries/issues.
• Monitor the implantation of disciplinary measure and/or removal of workers for safety violations per established rules and requirements, monitor compliance with OSHA regulations and perform and report safety observations on all contractors performing work on company projects.
• Provide input into the labor resource strategy for the project.
• Assist with in-depth project constructability assessments and reviews.
• Provide support to team members to execute and/or track critical project aspects including schedule, safety, permit compliance, drawing review, execution plan review, commissioning activities, and cost tracking.
• Establish an effective relationship with all stake holders based on teamwork and open honest communication.
• Provide construction consult to project leads and other team members and assist with mentoring and construction knowledge transfer to other members of the team.
• Ensure adequate inspection and/or monitoring of all work to establish compliance with requirements, and to maintain appropriate records in the project files.
• Participate in construction inspections and quality related site activities.
• Establish, monitor, and track processes to ensure regulatory compliance.
• Ability to work with internal & external locate firms to locate underground gas and electric facilities using various types of information including company maps, construction prints and as-built drawings to determine approximate locations of the facilities.
• Utilize various types of electronic locating equipment.
• Assists in the management of all phases of construction, material deliveries and contractors doing business on company property from start-up to project closeout.
• Works as a team member to construct major equipment (Combustion Turbines, Generators, and associated equipment) in accordance with construction documents.
• Assists senior technicians, engineers and designers in the project design, material specifications and procurement.
• Works closely with department personnel and provides support to complete project schedules within the assigned area of responsibility.
  
  

• Minimum of 7 years of experience as an I&E Technician or Construction Manager within a Power Plant environment (Gas Turbines/Generators).
• Proven experience with installation and commissioning activities for Combustion Turbines & Generators, Black Start Power Plant builds, and supporting systems.
• Strong knowledge of all phases of site construction, including scheduling, cost control, quality assurance, and adherence to project scope and specifications.
• Demonstrated ability to manage contractors, coordinate construction activities, and ensure seamless integration with plant operations.
• In-depth understanding of safety practices, including OSHA regulations, with a strong track record of promoting and enforcing safety on job sites.
• Excellent communication and leadership skills.

One Tech Engineering is searching for a Project Coordinator for a position located in either Denver, Colorado, or Minneapolis, Minnesota. The Project Coordinator will be responsible for reconciling backlog work orders and ensuring all necessary actions are completed efficiently.

The candidate must be a US citizen or hold a green card. The candidate should have at least 3 years of related work experience.

• Review and process backlog work orders to ensure accuracy and completion.
• Work through assigned lists, complete tasks, and request additional lists as needed.
• Communicate with coordinators, stakeholders, and team members to resolve issues.
• Track and report progress using Microsoft Excel and other tools.
• Work independently while collaborating with the team as necessary.

• 3+ years of related work experience.
• Experience working in the power or utility industry is a plus.
• Experience with work order management is beneficial.
  
• Proficiency in Microsoft Excel and the Microsoft Office Suite (Outlook, Teams, etc.)
• SAP experience is a nice-to-have.
• Strong attention to detail.
• Ability to work independently while collaborating as needed.

• Responsible for recognizing, monitoring, and making recommendations to correct workplace safety hazards through on-site audits, consulting, ergonomic assessments, and interventions according to OSHA and other regulatory agencies; and collaborating on safety policy development and training. Conduct site safety orientations.
• Participate in Pre-Job Safety Reviews and project planning to ensure successful and safe execution of work tasks.
• Provide coaching to employees on safety practices.
• Conduct a weekly ‘all hands safety meeting’.
• Manage all hot work permitting.
• Oversee all incident investigations.
• Generate all required documentation in SiteDocs.

• At least 5-10+ years of utility safety experience.
• Previous experience working with utility contractors, and site personnel.
• Certified Utilities Safety Professional certification preferred
• Working knowledge of OSHA Compliance.
• Proficient with Microsoft office; Spreadsheets in Excel, Experience with Eco Online.

• Responsible for capturing any field changes to the design.
• Responsible for communicating properly to the responsible parties within the Company on a routine or daily basis.
• Responsible for insuring the constructor performs the Work to the Company's specifications and standards.
• Responsible for insuring the constructor uses the proper materials in the proper place on the Project.
• Shall take all precautions to protect Company's equipment, materials and customers and be a good representative for Company.

• 10 + years of substation construction experience.
• Previous Journeymen or Substation Electrician experience required
• Excellent oral and written communication skills.

• Perform primary project controls assignments to support Project Managers.
• Accountable for generating reports, assisting with control activities, responding to data requests and developing/maintaining/supporting project schedules and/or detailed cost tracking.
• Coordinates with Project Managers to obtain weekly and monthly cost and schedule updates. This includes project financials, the health of the financials, and the project as a whole by submitting monthly forecasts accruals.
• Assist the Project Managers in providing accurate project forecasting and review of expenditures.
• Attend project meetings.

• 5-7 years of experience with cost accounting within the construction, renewables, or oil and gas industry.
• Strong proficiency in Microsoft Excel.
• Experience in SAP (ECC) is strongly preferred.
• Experience with macros is preferred.
• PMP certification is a nice to have.
• Good communication skills.

One Tech Engineering is searching for a Survey Technician for a position located in Denver, Colorado. The Survey Technician will be responsible for operating AMLD-equipped vehicles to conduct night-time surveys of natural gas systems, ensuring accurate data collection and prompt reporting of any detected gas leaks.

The candidate must be a US citizen or hold a green card. The candidate should have previous experience in a delivery driving role.

• Operate fleet vehicles equipped with Advanced Mobile Leak Detection (AMLD) technology to survey natural gas systems.
• Follow specific maps to ensure complete and accurate coverage of designated survey areas.
• Conduct surveys during nighttime hours to enhance the detection of potential gas leaks.
• Turn on AMLD equipment, drive to assigned areas, and perform the survey as mapped.
• Accurately and thoroughly collect data during each survey run.
• Relay any alarms to the gas dispatch team, who will take appropriate action.
• After completing the survey, return vehicles to the service center.
• Ensure vehicles are properly plugged in and charged at the end of each shift.

• Previous experience in delivery driving jobs, such as those with Amazon, UPS, or USPS.
• Familiarity with the following routes and maps is essential.
• Experience using navigation software like Google Maps or Apple Maps is beneficial.
• Experience using tablets and specific software applications, including Picaro, AMLD leak survey software, and PQ software.
• Familiarity with driving around the Denver metro area is a plus.
• Strong communication skills.
• Must have a valid drivers license.

One Tech Engineering is searching for an Electrical Construction Supervisor for a position located near Kit Carson, Colorado. The Electrical Construction Supervisor will oversee the installation, testing, and commissioning of electrical systems, including power distribution systems, substations, high voltage systems, low voltage systems, and SCADA systems.

The candidate must be a US citizen or hold a green card. The candidate should have 5 to 7 years of electrical experience on wind turbine systems, including experience with power distribution systems, high voltage, low voltage, and substations.

• Perform inspections of electrical systems, including wiring, grounding, switchgear, transformers, and control panels.
• Verify compliance with NEC, IEC, IEEE, and project-specific electrical codes and standards.
• Inspect electrical installations for proper terminations, torque values, insulation resistance, and overall workmanship.
• Review and approve electrical work based on project specifications and quality control procedures.
• Conduct visual and functional inspections of electrical components, ensuring proper energization and operational readiness.
• Witness and document electrical testing, including megger testing, high-potential testing, and functional performance testing.
• Verify electrical grounding and bonding systems meet project requirements.
• Oversee commissioning activities, ensuring proper energization sequences and safe startup procedures.
• Identify and document non-conformances, recommending corrective actions as needed.
• Maintain detailed records of inspections, test results, and corrective actions.
• Prepare daily and weekly reports on inspection findings and status updates.
• Ensure adherence to OSHA, NFPA, and other safety regulations related to electrical systems.
• Collaborate with site engineers, contractors, and safety personnel to resolve compliance issues.
• Work closely with construction teams, project managers, and subcontractors to address electrical issues and provide guidance.
• Support and participate in safety meetings, audits, and risk assessments.
• Assist in reviewing electrical installation drawings, single-line diagrams, and cable schedules for accuracy.

• 5 to 7 years of electrical experience on wind turbine systems, including experience with power distribution systems, high voltage, low voltage, and substations.
• Electrical degree is required.
• Knowledge of OSHA, FERC regulations, and electrical/mechanical codes is required.
• Proficiency in project management tools such as Microsoft Projects and ProjectWise.
• Direct experience with Vestas platforms is preferred.
• Familiarity with Bluebeam is preferred.
• Ability to effectively manage and coordinate activities in the field.
• Strong communication skills.
• Must have a valid driver’s license.

One Tech Engineering is searching for a Geologist Assistant for a position located in Wichita, Kansas. The Geologist Assistant will assist on a variety of environmental based tasks as required by the project including federal, state, local, and commercial clients. The Geologist Assistant will also be responsible for field sampling, investigations, and report writing.

The candidate must be a US Citizen or a green card holder, the position is not eligible for sponsorship. The candidate should have a Bachelor’s in Geology or Environmental degree and previous internship or consulting experience.

Local candidates preferred or open to relocation. This is not a remote position.

Geologist Assistant Responsibilities:

• Assist with field related activities including logging soils, air monitoring during investigation and remediation activities, installation of groundwater monitoring wells, collection of soil and groundwater samples for laboratory analysis, and collection of soil for physical testing.
• Assist in assessing soil and groundwater data, developing soil and groundwater sampling plans, data compilation for soil, air and groundwater analytical results.
• Assist with proposal and report writing for environmental based projects.
• Assist in coordinating and scheduling subcontractors for field investigation activities and assisting with site remediation planning and implementation.
• Assist in coordinating laboratory analysis appropriate to the proper identification and evaluation of samples.
• Assist with on-site field monitoring to document compliance with various federal, state, and local permit requirements during project construction.
• Performs other duties as assigned.
• Complies with all policies and standards.

• Bachelor’s degree in Geology or related Environmental degree required.
• Prior internship and/or related consulting experience.
• Previous internship experience, including hazardous site assessment experience, such as Phase I, Phase II and remediation preferred.
• Basic knowledge in standard geological techniques, principles and procedures.
• Basic knowledge of the Unified Soil Classification System. glacial deposits, hydrogeology and ground water sampling.
• Basic knowledge of OSHA, CERCLA and remedial design.
• Excellent written & verbal communication skills.
• Ability to work methodically and analytically in a quantitative problem-solving environment and demonstrated critical thinking skills.
• Proficient computer skills (e.g. Microsoft Office Suite).
• Basic knowledge in ArcGIS, RockWare, and Adobe Illustrator preferred.
• Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills.
• Demonstrated leadership skills.
• Valid driver's license is required
• OSHA 40-hour HAZWOPER training is preferred.

One Tech Engineering is searching for a Designer who has previous experience with cabinetry design or commercial design experience, for a position located near Lakeville, Minnesota.

The Designer should have prior design experience and knowledge of CAD drafting and designing. This position will work in the commercial industry designing casework, cabinetry, seating, and interiors.

• Uses AutoCad and other software in the design of custom hospitality projects.
• Designs on specific hospitality industry projects as assigned.
• Makes changes to designs to improve upon design after mocked up in the shop.
• Assists in planning meetings making suggestions for interiors for the hospitality industry.
• Works in the Hospitality industry designing casework/cabinetry, seating and interiors.
• Works closely with estimators and shop floor to ensure high quality products.

• Must have a working knowledge of AutoCad.
• 1-3 years of experience required.
• 1-2 years of millwork experience preferred.
• AAS in Drafting or Design.
• Working experience with different types of materials: wood, metal plastics.
• Previous experience in a millshop, woodshop or cabinet shop preferred.